Laser processing of micro-optical components in quartz

Laser induced backside wet etching combined with the diffractive gray tone phase mask has been used for the fabrication of a micro-lens array with a single lens diameter of 1 mm and a micro-prism in quartz. The micro-lens array was tested as beam homogenizer for high power XeCl excimer laser yielding a clear improvement in the quality of the laser beam.The optimum fluence range for fabrication of micro-lenses by laser induced backside wet etching using 1.4 M pyrene in THF solution and 308 nm irradiation wavelength is 1-1.6 J/cm². The etching mechanisms of LIBWE are based on a combination of pressure and temperature jumps at quartz-liquid interface.     

Growth of cubic MgxZn1−xO alloy films by electron beam evaporation

We report the growth of cubic Mg_xZn_1−xO alloy thin films on quartz by electron beam evaporation. It can be found that all the samples have sharp absorption edges by the absorption measurements. X-ray diffraction measurements indicate the Mg_xZn_1−xO films are cubic phase with preferred orientation along the (1 1 1) direction. Energy dispersive spectrometry (EDS) demonstrates that the Mg concentration in Mg_xZn_1−xO films is much higher than the ceramic target used, and the composition can be tuned in a small scope by varying the substrate temperature and the beam electric current. The reasons of this phenomenon are also discussed.     

Studies of propagation characteristics of elliptical Gaussian beams through circular apertured optical systems

An approximate analytical propagation formula of the elliptical Gaussian beams through a paraxial ABCD optical system with a circular aperture is obtained on the basis of the expansion of a hard-edged aperture into a finite sum of complex Gaussian functions. And the parameter characteristics of the truncated beams including the beam propagation factor and the kurtosis parameter are also studied in detail by using the second-order-moments method.     

Transfer Thermodynamics of Protein in Denaturing and Stabilizing Media

Free energies of transfer (ΔG_t) of RibonucleaseA (RNaseA) from water to aqueous solutions of urea (4 M, 6 M and 8 M), a protein denaturing solvent as well as ΔG_t of RibonucleaseA, β‐Lactoglobulin, α‐Chymotripsin and ChymotrypsinogenA from water to aqueous glycerol (10%, 20%, 30% and 40%), a protein stabilizing solvent has been dissected into cavity term [ΔG_t(cav)] and interaction term [ΔG_t(int)]. The interaction free energy includes all types of interactions like hard‐soft, hydrogen bonding, electrostatic, etc. The cavity forming free energies have been calculated using the standard version of scaled particle theory (SPT) with well‐reported SPT parameters. It has been found that transfer free energies of cavity terms ΔG_t(cav) for native protein from water to urea‐water and water to aqueous glycerol follow almost opposite trends. This primarily indicates there may be some correlation between cavity creation energies and protein denaturing and stabilizing ability of a solvent. The results are in agreement with those obtained from preferential binding coefficient studies in these media.     

Shearing effects on the breathing mechanism of a cracked beam section in bi-axial flexure

The main purpose of this paper is to complete the works presented by Andrieux and Varé (2002) and El Arem et al. (2003) by taking into account the effects of shearing in the constitutive equations of a beam cracked section in bi-axial flexure. The paper describes the derivation of a lumped cracked beam model from the three-dimensional formulation of the general problem of elasticity with unilateral contact conditions on the crack lips. Properties of the potential energy and convex analysis are used to reduce the three-dimensional computations needed for the model identification, and to derive the final form of the elastic energy that determines the nonlinear constitutive equations of the cracked transverse section. We aim to establish a relation of behavior between the applied forces and the resulting displacements field vectors, which is compatible with the beams theory in order to allow the model exploitation for shafts dynamics analysis. The approach has been applied to the case of a cracked beam with a single crack covering the half of its circular cross section.     

Design and fabrication of diffractive elements for laser material processing applications

Diffractive optical elements have an important role to play in the provision of process adapted beam shaping for laser-materials processing applications. The design techniques and dominant methods of fabrication are described for intra-cavity and external beam shaping diffractive elements fabricated in a variety of dielectric and metallic materials for use with a wide range of laser sources. Theoretical and experimental examples are given in each section.     

高功率粒子束及其应用

本文评价了高功率粒子束的工作原理及其应用:文中以闪光-Ⅰ强流脉冲电子束加速器为例,论述了机器的基本技术和它的工作特性 高功率粒子束目前已经应用到许多重要研究领域。包括:核辐射效应模拟源、闪光X射线照相、高功率激光器研究、惯性约束聚变、高功率微波的产生、离子集体加速等方面。 报告中简述了我国在高功率粒子束加速器建造和开拓应用方面取得的进展。 最后,也指出了高功率粒子束技术今后发展有关的研究课题。     

Film forming kinetics and reaction mechanism of γ-glycidoxypropyltrimethoxysilane on low carbon steel surfaces

The film forming kinetics and reaction mechanism of γ-GPS on low carbon steel surfaces was investigated by FTIR-ATR, AFM, NSS and theoretical calculation method. The results from experimental section indicated that the reaction of γ-GPS on low carbon steel surfaces followed the conventional reaction mechanism, which can be described as reaction (I) (Me (Metal)-OH + HO-Si → Me-O-Si + H₂O) and reaction (II) (Si-OH + Si-OH → Si-O-Si + H₂O). During film forming process, the formation of Si-O-Fe bond (reaction (I)) exhibited oscillatory phenomenon, the condensation degree of silanol monomers (reaction (II)) increased continuously. The metal hydroxyl density had significant influence on the growth mechanisms and corrosion resisting property of γ-GPS films. The results from theoretical calculation section indicated that the patterns of reaction (I) and reaction (II) were similar, involving a nucleophilic attack on the silicon center. The formation of Si-O-Fe bond (reaction (I)) was kinetically and thermodynamically preferred, which had catalytic effect on its condensation with neighboring silanol monomers (reaction (II)). Our DFT calculations were good consistent with the experimental measurements.     

Simulating the introduction of a sapphire crystal into an epithermal neutron beamline

The epithermal beamline at the Portuguese Research Reactor is being optimized for Prompt Gamma Neutron Activation Analysis (PGNAA). One of the major changes is to thermalise the beam by the introduction of a sapphire crystal into the beamline. Placing the sapphire at the exit of the beamline would greatly reduce the alterations and work necessary to the port and make the crystal easily removable. However, the scattered neutrons from the sapphire would increase both the neutron-induced detector damage and the background radiation. MCNPX was used to simulate the crystal in the beam port and at the exit of the port.     

Observation of THz coherent transition radiation from single-bunch beam at KURRI-LINAC as an intense pulsed light source

A single-bunch beam has been generated using a developed high-speed avalanche-type pulser in KURRI-LINAC in order to lift restrictions of the spectral resolution in the spectroscopic study and the delay time in the time-resolved measurement. Both of the rise and fall times of the developed pulser are 110 ps. The observation of CTR has confirmed the single-bunch beam. The degree of impurity of single bunch has been estimated to be 1.5% by the analysis of the interferogram.