The analysis of the orientation effect of non-linear flexible systems on performance of the pendulum absorber

In practical applications, many vibration absorbers are used to absorb oscillation of a structure, one of which is pendulum-type vibration absorbers. They are widely used in engineering applications where oscillations of a structure are constrained within a prescribed envelope. In this study, the primary structure consists of a flexible beam which has a single degree of freedom, and is subjected to a vertical sinusoidal base excitation. Non-linearity in the primary structure is due to large deflections. The rotation point of the pendulum-type absorber is attached to the tip of the primary structure. The primary structure and absorber together constitute a couple systems with two degrees of freedom. The primary objective of this study is to determine the effectiveness of pendulum-type passive vibration absorber attached to a primary structure whose orientation varies. In this study, the orientation at which the absorber is effective is established, and the factors that affect performance of the absorber are determined. The results are in good agreement with the experimental ones given in the literature.     

9MeV行波直线加速器用四极透镜系统状态分析

 分析了大型海关集装箱检测系统用的9 MeV电子直线加速器的四极透镜系统变为斜四极透镜系统对束流聚焦特性的影响。对三单元四极透镜系统聚焦参数、制造和安装误差进行了分析，给出了参数选择方法和合理的误差要求。以上计算利用束流动力学程序TRANSPORT完成。     

束流位置监测系统的研制及其在国家同步辐射实验室二期工程中的应用

 介绍一种储存环束流位置监测系统的标定装置。这套标定装置是为NSRL二期工程储存环注入段真空盒改造而研制的。系统的标定精度达±0.01mm。该装置已用于新增注入段真空管的束流位置探测器的定标，获得了探头定标值，并根据其拟合和计算结果对注入段真空管进行了筛选，被选中的真空管已装入储存环注入段。     

二极管泵浦Nd:YAG板条双通放大器技术研究

对二极管泵浦NdYAG板条双通放大器进行了理论设计和数值计算.在注入能量1 mJ,小信号增益为0.23 cm-1时理论计算结果为双通放大器输出能量为229.8 mJ.实验在10 Hz时获得单脉冲输出能量216 mJ;400 Hz时获得单脉冲输出能量203.4 mJ,光束质量因子小于5,激光脉宽为16.9 ns.实验结果与理论计算基本吻合.用相位共轭镜取代0°全反镜,超高斯镜取代振荡级输出镜,并采用镜面均匀的光学器件可以改善光束质量及光斑均匀性.     

合肥光源逐圈束流位置监测系统中的定时系统

定时系统是合肥光源逐圈束流位置监测和相空间测量系统中的重要组成部分，其主要目的是为数据采集卡提供与环内电子束团同步的时钟信号。该系统包含高速ECL时钟成形、分频电路、程控延时电路、控制模块等部分。可实现延时范围0～220ns，最小延时步距0.5ns，调整精度0.1ns，时钟抖动小于200ps。系统控制软件基于客户/服务器结构，操作灵活、方便。     

PROPAGATION CHARACTERISTICS OF GAUSSIAN BEAMS WITH ASTIGAMATISM

Transformation of Gaussian beams propagating through an axially asym-metric optical system is studied in detail by means of the complex curvature tensor andthe tensor ABCD law.Some important propagation characteristics of Gaussian beamswith simple or general astigmatism are demonstrated by typical numerical examples.     

Beam quality changes of radially and azimuthally polarized fields propagating through quartic phase plates

In terms of the so-called irradiance moments of a light field, the beam quality change, ΔQ, of radially and azimuthally polarized beams caused by propagation through a quartic phase plate (as occurs, for example, in strongly pumped laser rods used in high-power solid-state lasers) is studied. Analytical expressions for ΔQ are given, and a comparison between the scalar and vectorial regimes is also shown. The results are applied to several cases of interest.     

强流相对论电子束在等离子体内引起的回流电流

本文用宏观处理的方法,研究了强流相对论电子束在等离子体内引起的回流电流效应。通过Fourier变换的方法,求得Maxwell方程组的电场表达式和回流电流的径向表达式。在4στ>>1的极限下,电子束通道内的回流电流和入射的电子束电流基本抵消。最后,比较了回流电流的焦耳热和束电子与等离子体粒子库仑碰撞的能耗值。     

Structural ordering in glass forming tellurium-germanium melts

The character of reorganization of the short-range order and the scale structure during the ordering of glass forming melts is elaborated based on the results of diffraction and microscopic investigations of the ordered and glassy alloys in tellurium-germanium systems. For this purpose cooling curves reflecting the formation processes of structural levels in real time are analyzed and the effective activation energies are estimated.     

预裂爆破设计参数的理论分析

本文在分析不偶合装药爆破物理过程和动态冲击压力的基础上,研究了预裂孔的破坏型态;利用相应的破坏准则,推导了预裂孔临界和允许体积装药密度的理论计算式,并在总结已有的预裂成缝理论和实验成果的基础上,用裂断力学理论对成缝机理作了进一步探讨。考虑了岩体初始应力的影响,对裂缝扩展进行了定量描述,提出了预裂爆破炮孔间距的计算表达式。