苯乙烯-异戊二烯两嵌段共聚物溶液的dn/dc和紫外吸收光谱

本文研究了苯乙烯-异戊二烯两嵌段共聚物在CHCl_3中的折光指数浓度增量(dn/dc)和紫外吸收光谱。嵌段共聚物dn/dc具有很好的加和性,可以测定嵌段共聚物的组成。紫外吸收光谱的结果表明,除低苯乙烯含量的样品外,其它嵌段共聚物都显示明显的紫外增色性(UV hyperchromism)。因此UV和UV-RI双检测GPC不会得到可靠的嵌段共聚物组成数据。这种增色现象与其特征的紫外吸收谱图紧密关联     

氢化物发生石墨炉原子吸收光谱法直接测定高温镍基合金中的硒

在６ｍｏｌ／Ｌ盐酸介质和０．１％ＫＢＨ４条件下，不但能有效地发生硒的氢化物，而且５ｍｇ／ｍｌＮｉ和３ｍｇ／ｍｌＦｅ都不干扰硒的测定。利用涂钯石墨；管作为氢化物的原子化器，直接测定了高温镍基合金中的硒，特征质量为４０ｐｇ，相对标准偏差在６．１％以内，回收率在９７％－１１０％之间。     

痕量Au Bi和Cd的萃取浮选及原子吸收光谱法测定

浮选法分离痕量金属离子,由于灵敏度高、选择性强已得到广泛应用。本文利用浮选法使Au~(3 )、Bi~(3 )和Cd~(2 )同KBr反应生成的络合阴离子与碱性染料罗丹明B(RB)生成既疏水又疏有机溶剂的三元离子缔合物,后者经甲苯浮选分出,用二甲基甲酰胺(DMF)溶解后,可用原子吸收法测定Au、Bi和Cd的含量。本方法用于海水,锌片和矿样中上述三种元素的微量测定,可提高检测灵敏度,而且K、Na、Ca、Mg等共存离子不生干扰。具体实验方法如下:     

Study of the absorption spectra and ionic equilibria of cationic-anionic polymethine dyes

The absorption spectra of a number of cationic-anionic polymethine dyes in polar, low-polarity, and nonpolar solvents were studied. It was established that in polar solvents the absorption spectra represent the sum of the absorption spectra of the cation and anion, whereas in nonpolar and low-polarity solvents, in many cases the appearance of a short-wave absorption band is observed, due to interaction of the chromophores of the cation and anion in ion pairs. In solvents of intermediate polarity (for example, in chloroform and ethyl acetate), a concentration dependence of the absorption spectra is observed, determined by the equilibria of ionic dissociation. The ionic dissociation constants of a number of cationic-anionic dyes in chloroform and ethyl acetate were determined by a conductometric method. The thermodynamic data obtained are compared with the spectral data.N. N. Semenov Institute of Chemical Physics, Russian Academy of Sciences, 117977 Moscow. Translated fromIzvestiya Akademii Nauk, Seriya Khimicheskaya, No. 11, pp. 2524–2532, November, 1992.     

地质样品中金,银,铊等元素的连续原子吸收光谱法测定

本文提出了一个一次称样连续测定金、银、铊的简便、快速的新方法。该法是以泡塑吸附金、铊，使银等定量地保留在溶液中。泡塑上的铊用ＥＤＴＡ解脱后，再用硫脲溶液继续解脱金，然后，采用原子吸收光谱法连续测定金、银、铊。方法用于黄铁矿、方铅等单矿矿物及岩石、土壤样品中ｘｎｇ／ｇ～ｘｘｘμｇ／ｇ金、银、铊的测定，获得满意结果。     

Spin-orbit ab initio investigation of the ultraviolet photolysis of diiodomethane.

The UV photodissociation (<5 eV) of diiodomethane (CH(2)I(2)) is investigated by spin-orbit ab initio calculations. The experimentally observed photodissociation channels in the gas and condensed phases are clearly assigned by multi-state second-order multiconfigurational perturbation theory in conjunction with spin-orbit interaction through complete active space-state interaction potential energy curves. The calculated results indicate that the fast dissociations of the first two singlet states of CH(2)I(2) and CH(2)I--I lead to geminate-radical products, CH(2)I (.)+I((2)P(3/2)) or CH(2)I (.)+ I*((2)P(1/2)). The recombination process from CH(2)I--I to CH(2)I(2) is explained by an isomerization process and a secondary photodissociation reaction of CH(2)I--I. Finally, the study reveals that spin-orbits effects are significant in the quantitative analysis of the electronic spectrum of the CH(2)I--I species.     

氮杂冠醚研究Ⅶ、双仲胺型氮杂冠醚对过渡金属离子的选择性萃取作用

合成了五种新型双仲胺型氦杂冠醚，研究了它们对过渡金属离子进行液—液萃取，并用原子吸收法测定其浓度。实验结果表明：这类冠醚对Ａｇ￣＋、Ｐｄ￣（２＋）、和Ｐｔ￣（４＋）等贵金属离子有较强的选择配位性能，对选择性分离这些金属离子有重要的意义。     

Progress on phthalocyanine-conjugated Ag and Au nanoparticles: Synthesis,characterization, and photo-physicochemical properties

Phthalocyanine (Pc) complexes are an important class of dyes with numerous (e.g., biological, photophysical, and analytical) applications. Among the methods used to improve the properties of these complexes, one should mention the introduction of different substituents, variation of the central metal ion, ligand exchange, and conjugation to nanomaterials (e.g., carbon-based nanomaterials and metal nanoparticles (NPs)). This work briefly reviews Pc complex conjugation to Ag and Au NPs, highlights the different NP shapes, and discusses the diversity of conjugation approaches. Moreover, the use of UV–Vis spectroscopy, powder X-ray diffraction, X-ray photoelectron spectroscopy, transmission electron microscopy, atomic force microscopy, dynamic light scattering and Fourier transform infrared spectroscopy to characterize Pc-NP hybrids is summarized. The effect of conjugation on Pc photo-physicochemical properties (fluorescence, singlet oxygen generation, triplet state formation, and optical limiting behavior) is discussed, and future perspectives for the synthesis and applications of new hybrids are provided.     

Influence of two grinding methods on the uncertainty of determinations of heavy metals in atomic absorption spectrometry/electrothermal atomisation of plant samples

 Chemical analyses of trace elements are affected by relatively high analytical errors due to the different steps of the laboratory procedures: samples grinding, mineralisation and instrumental measurements. In the present communication, the influence of the grinding phase on the global uncertainty of Pb, Cd, Ni and Cr determinations in plant samples by the classical method of atomic absorption spectrometry/electrothermal atomisation (AAS-ETA) after dry ashing is quantified. Two grinding machines, a planetary mill with balls and jars of agate versus a stainless steel grinder were compared by analysing leaf samples of cucumber, strawberry, kiwivines, apple trees and grapevines from agricultural experimental plots under controlled conditions. Variance components due to the difference between grinding methods and experimental plots were estimated. Further, the simultaneous effects of the grinding methods on all considered metals have been evaluated by analysis of variance. With the stainless steel grinder, on average, higher levels of the considered heavy metals were obtained (up to 67% of the mean values). On average, the increments were similar for metals contained in steel (Ni and Cr) and those not contained (Pb and Cd). The true causes of these differences need further investigation to determine whether the higher metal detection is due to possible contamination, to a different grinding quality or to other reasons. Finally, the grinding methods did not seem to affect the combined uncertainty of the analyses. Received: 3 November 1997 · Accepted: 29 November 1997     

Comparison of slurry sampling and microwave-assisted digestion for calcium, magnesium, iron, copper and zinc determination in fish tissue samples by flame atomic absorption spectrometry

The development of a slurry sampling method for the determination of calcium, copper, iron, magnesium and zinc in fish tissue samples by flame atomic absorption spectrometry is described. In comparison with microwave-assisted digestion, the proposed method is simple, requires short time and eliminates total sample dissolution before analysis. Suspension medium was optimized for each analyte to obtain quantitative recoveries from fish tissue samples without matrix interferences. Nevertheless, iron recoveries higher than 46% were not found. Treatment of samples slurried in nitric acid by microwave irradiation for 15-30 s at 75-285 W permitted to achieve efficient recoveries for calcium, iron, magnesium and zinc. Further improvement in the matrix effects for iron determination was accomplished by the use of an additional step of short microwave-assisted suspension treatment. However, standard addition method was required for calcium and copper determination, being necessary hydrochloric acid as suspension medium for the last one. Although copper could not be determined in the certified reference material using microwave-assisted digestion, the accuracy of the slurry sampling method was verified for all the investigated analytes. Detection limits were 22.8 ± 8.0, 0.884 ± 0.092, 5.07 ± 0.76, 35.5 ± 0.7 and 1.17 ± 0.04 μg g⁻¹ for calcium, copper, iron, magnesium and zinc, respectively. The standard deviations obtained using slurry sampling method and microwave-assisted digestion were not significantly different, and the mean relative standard deviation of the over-all method (n = 3) of the slurry sampling method for different concentration levels was below 12%.