Spectrum analysis of U-doped LaBr3 single crystals. Part 1: crystal-field analysis

Single crystals of U³⁺:LaBr₃ were grown by the Bridgman-Stockbarger technique. High-resolution polarized absorption spectra of the crystals were recorded at 4.2 K in the 4000-50,000 cm⁻¹ range. Sixty-four experimental crystal-field energy levels of the U³⁺ ion were fitted to a semiempirical Hamiltonian employing free-ion, one-electron crystal-field as well as two-particle correlation crystal-field (CCF) operators with an r.m.s. deviation of 28 cm⁻¹. The performed analysis of the spectra enabled the determination of crystal-field parameters and assignment of the observed 5f³→5f³ transitions. The effects of selected CCF operators on the splitting of some specific U³⁺ multiplets have been investigated and the obtained values of Hamiltonian parameters are discussed and compared with those reported in previous analyses.     

Determination of fluoride in complex liquid matrices by electrothermal atomic absorption spectrometry with in-furnace oxygen-assisted ashing

A new chemical method is reported for the determination of total fluoride in complex liquids and suspensions, such as fruit juices, urine, serum and blood. It is based on the formation of the A1F radical in a graphite furnace afterin situ oxygen-assisted ashing of the untreated sample. The absorbance of this radical is measured at 227.45 nm. The method is relatively easy to use and provides a low detection limit (14 ng/ml) and reasonable reproducibility (5–10%).     

Validation of an analytical method to determine trace metal impurities in fluoride compounds by flame atomic absorption spectroscopy

 The development of an analytical method for the determination of some heavy metals (Fe, Cu, Co, Zn and Ni) in fluoride compounds [Cu(BF₄)₂, Sn(BF₄)₂, Pb(BF₄)₂ and HBF₄] by flame atomic absorption spectroscopy is described. This method is to be used as a routine analytical method in an industrial quality control laboratory. To this end the "performance characteristics" of an instrumental analytical method such as matrix effects, sensitivity, linearity, detection and quantitation limits, precision and accuracy were evaluated for every system under study. The results of these investigations showed that non-spectral interferences (due to the presence of large concentrations of major metals such as Cu, Sn and Pb) were observed. Nevertheless it was possible to define a matrix concentration interval where matrix effects were not statistically significant, and therefore a direct calibration approach could be used as the calibration tool whenever the major metal concentration was not higher than 40×10^–3 kg l^–1. A guide to the developement of an analytical method for trace metal determination is provided. General tools for quality control have been used in order to show how an analytical method can be tested daily and evaluated in a convenient manner. Received: 29 January 1997 Accepted: 11 March 1997     

中药片仔癀,六味地黄丸中的微量铬,铅和镉石墨炉原子吸收法测定

本文采用ＧＦ－ＡＡＳ加平台技术，基体改进剂，测定了中药片仔癀，六味地黄丸中铬、铅和镉的含量，铬、铅和镉的线性范围分别为０－０．８ｎｇ／ｍＬ，０－５０ｎｇ／ｍＬ，０－５ｎｇ／ｍＬ，回收率分别为１０２－１０３％，９９－１０１％，９７．５－９８％，本方法简便快速、准确。     

Synthesis and Characterization of Lead Sulfide Nanoparticles in Zirconia-Silica-Urethane Thin Films Prepared by the Sol-Gel Process

PbS nanocrystals (NCs) ranging between 4–8 nm were incorporated into Zirconium-Silica-Urethane (ZSUR) matrix obtained by the sol-gel method. The sizes of the particles were controlled by temperature treatment and by concentration of PbS in ZSUR matrix. The sizes of PbS NCs were determined by TEM measurements. The quantum size effect could also be extracted from optical absorption and photoluminescence spectra. The new matrix allows incorporation of up to 40% PbS forming a characteristic structure of dendrite by reacting lead acetate with ammonium thiocyanate in sol-gel matrix. The sol precursors of the matrix for Zirconium-Silica-Urethane contained zirconium oxide (ZrO₂) matrix solution, tetramethoxysilane (TMOS), 3-glycid oxypropyl trimethoxysilane (GLYMO) and polyethylene urethane silane (PEUS) synthesized separately. The ZrO₂ matrix solution was obtained from zirconium n-tetrapropoxide in propanol and acetic acid was used as a chelating agent to stabilize the zirconium oxide precursor.     

Taking snapshots of photoexcited molecules in disordered media by using pulsed synchrotron X-rays

Photoexcited molecules are quintessential reactants in photochemistry. Structures of these photoexcited molecules in disordered media in which a majority of photochemical reactions take place remained elusive for decades owing to a lack of suitable X-ray sources, despite their importance in understanding fundamental aspects in photochemistry. As new pulsed X-ray sources become available, short-lived excited-state molecular structures in disordered media can now be captured by using laser-pulse pump, X-ray pulse-probe techniques of third-generation synchrotron sources with time resolutions of 30-100 ps, as demonstrated by examples in this review. These studies provide unprecedented information on structural origins of molecular properties in the excited states. By using other ultrafast X-ray facilities that will be completed in the near future, time-resolution for the excited-state structure measurements should reach the femtosecond time scales, which will make "molecular movies" of bond breaking or formation, and vibrational relaxation, a reality.     

Pt3Co核-Pt壳型纳米粒子的制备及磁性

Pt₃Co alloy nanoparticles were prepared by the reduction of H₂PtCl₆ and Co(OOCCH₃)₂ using NaBH₄ as a reducing agent. The Pt₃Co core-Pt shell nanoparticles (Pt₃Co@Pt) were synthesized using hydrogen absorption reduction and characterized by plasma-atomic emission spectrometry (ICP), transmission electron microscopy (TEM), X-ray diffraction (XRD) and SQUID magnetometer. The results show that average size of Pt₃Co@Pt nanoparticles is 3.6 nm with a standard deviation of 0.9 nm. Heating Pt₃Co nanoparticles in air at 700 ℃ for 1 h, Co in Pt₃Co nanoparticles was oxidized to Co₃O₄ and CoO; while no oxidation tendency was detected for Pt₃Co@Pt nanoparticles. The crystallize structure of Pt₃Co@Pt changed from the face centered cube (fcc) to the face centered tetragonal (fct) after the heating treatment. The coercivity of the heated Pt₃Co@Pt reached to 276 Oe at room temperature.     

火焰原子吸收光谱法测定天然气转化催化剂中的氧化钾

建立火焰原子吸收光谱法测定天然气转化催化剂中氧化钾的分析方法。该方法将催化剂样品和助溶剂四硼酸锂熔融后再用盐酸溶解定容,采用火焰原子吸收光谱仪对样品溶液进行测定。在优化的实验条件下,钾离子的质量浓度在0.05~0.50 mg/L范围内与吸光度呈良好线性关系,相关系数为0.9995。钾的方法检出限为0.001 mg/L,定量限为0.01 mg/L,测定结果的相对标准偏差为2.6%~4.3%(n=6),样品加标回收率为97.8%~102.3%。与HG/T 3543-2014中的酸溶制样法相比,该方法能够将催化剂样品中的难溶钾盐溶出,分析结果准确度更高,可用于天然气转化催化剂中氧化钾含量的测定。     

Time‐Resolved Synchrotron Radiation Excited Optical Luminescence: Light‐Emission Properties of Silicon‐Based Nanostructures

The recent advances in the study of light emission from matter induced by synchrotron radiation: X‐ray excited optical luminescence (XEOL) in the energy domain and time‐resolved X‐ray excited optical luminescence (TRXEOL) are described. The development of these element (absorption edge) selective, synchrotron X‐ray photons in, optical photons out techniques with time gating coincide with advances in third‐generation, insertion device based, synchrotron light sources. Electron bunches circulating in a storage ring emit very bright, widely energy tunable, short light pulses (<100 ps), which are used as the excitation source for investigation of light‐emitting materials. Luminescence from silicon nanostructures (porous silicon, silicon nanowires, and Si–CdSe heterostructures) is used to illustrate the applicability of these techniques and their great potential in future applications.     

流动注射在线液—液萃取原子吸收光谱法测定生物样品中的铅

本文利用所设计的一种新型流动注射液－液萃取重力分相器，建立了流动注射液溶剂萃取原子吸收光谱法测定铅的新方法，详细地研究了流动注射在线萃取的实验条件及流路系统，方法的精密度和检出限分别为２．５％（ｎ＝１１）和２．８μｇ／Ｌ（ｋ＝３）。用拟定的方法测定了峰蛹，粮食等生物样品中的铅，结果与参考值相吻合。