Barium Titanate-reinforced Acrylonitrile-Butadiene Rubber: Synergy Effect of Carbon-based Secondary Filler

Acrylonitrile rubber(NBR) composites filled with barium titanate(BT) were prepared using an internal mixer and a two-roll mill. Also, a secondary filler, namely carbon nanotubes(CNT), was added in order to find a potential synergistic blend ratio of BT and CNT. The cure characteristics, tensile and dielectric properties(dielectric constant and dielectric loss) of the composites were determined. It was found that NBR/BT composites with CNT secondary filler, at a proper BT:CNT ratio, exhibited shorter scorch time(t_(s1)) and cure time(t_(c90)) together with superior tensile properties and reinforcement efficiency, relative to the one with only the primary filler. In addition, the NBR/BT-CNT composite with 80 phr BT and 1-2 phr CNT had dielectric constant of 100-500, dielectric loss of 12-100 and electrical conductivity below 10~(-4) S/m together with high thermal stability. Thus, with a proper BT:CNT mix and filler loading, we can produce mechanically superior rubber composites that are easy to process and low-cost, for flexible dielectric materials application.     

基于碳纳米管分子封装的一维电子波函数扫描

利用第一性原理,设计并研究了一类基于单臂碳纳米管的分子封装的分子体系．计算表明,半环葫芦脲类化合物可有效封装碳纳米管,引入微弱的分子间相互作用,对碳纳米管的电子态能级结构分布 仅带来微弱影响．半环葫芦脲分子与碳纳米管在管径方向的一维电子态波函数充分耦合,进而有效改变了一些前沿分子轨道的波函数在管径两头的分布以及相应的电子布居浓度．基于电子输运的模拟,发现半环葫芦脲分子在碳纳米管一维方向滑动时的某个电压下的电导变化可准确反映电子态波函数在相应分子导电通道上的一维分布信息．     

Investigating the effect of interphase and surrounding resin on carbon nanotube free vibration behavior

The free vibration analysis of a carbon nanotube (CNT) embedded in a volume element is performed using 3D finite element (FE) and analytical models. Three approaches consist of molecular and continuum mechanics FE methods and continuum analytical method are employed to simulate the CNT, interphase region and surrounding matrix. The bonding between CNT and polymer is treated as non-perfect bonding using van der Waals and triple phase material interaction in first and second approaches. In analytical approach a perfect bonding is assumed between nanotube and matrix. First, natural frequencies of CNT under different boundary conditions and aspect ratios are obtained by three approaches and the results are compared with published data. The results show the frequency response variations of CNT in GHz to THz range. Subsequently, vibration behaviors of CNT/polymer are evaluated and the results revealed the importance of interphase region role in the performance of nanocomposites. The results also showed the convergence of the natural frequencies for 1–2.5% of CNT volume in high aspect ratios using three methods, so that the interphase effects is negligible. In addition, it is observed that the molecular method due to interphase role has proper performance in vibration behavior investigation of volume elements.     

Ferrimagnetic behaviors in a double-wall cubic metal nanotube

A double-wall cubic metal nanotube consists of the ferromagnetic spin-1 inner shell and spin-3/2 surface shell. It is of the ferrimagnetic exchange coupling between two shells. Considering the single-ion anisotropy and transverse field exist together, the magnetization, the initial susceptibility, the internal energy and the specific heat have been investigated by using the effective-field theory with correlations. Some interesting phenomena have been found in the thermal variations of the system. Magnetization appears two or three compensation points in certain parameters. It is an unconventional ferrimagnetic behavior in the nanotube. The shapes of total magnetization and the initial susceptibility are great influenced by the surface exchange coupling, surface single-ion anisotropy and surface transverse field. Some results of nanotube may have potential applications in different research fields, such as electronics, optics, mechanics, and even biomedicine and molecular devices.     

A Non‐Enzymatic Hydrogen Peroxide Sensor Based on Gold Nanoparticles/Carbon Nanotube/Self‐Doped Polyaniline Hollow Spheres

In this study, a novel non‐enzymatic hydrogen peroxide (H₂O₂) sensor was fabricated based on gold nanoparticles/carbon nanotube/self‐doped polyaniline (AuNPs/CNTs/SPAN) hollow spheres modified glassy carbon electrode (GCE). SPAN was in‐site polymerized on the surface of SiO₂ template, then AuNPs and CNTs were decorated by electrostatic absorption via poly(diallyldimethylammonium chloride). After the SiO₂ cores were removed, hollow AuNPs/CNTs/SPAN spheres were obtained and characterized by transmission electron microscopy (TEM), field‐emission scanning electron microscopy (FESEM) and Fourier transform infrared spectroscopy (FTIR). The electrochemical catalytic performance of the hollow AuNPs/CNTs/SPAN/GCE for H₂O₂ detection was evaluated by cyclic voltammetry (CV) and chronoamperometry. Using chronoamperometric method at a constant potential of ?0.1 V (vs. SCE), the H₂O₂ sensor displays two linear ranges: one from 5 µM to 0.225 mM with a sensitivity of 499.82 µA mM^?1 cm^?2; another from 0.225 mM to 8.825 mM with a sensitivity of 152.29 µA mM^?1 cm^?2. The detection limit was estimated as 0.4 µM (signal‐to‐noise ratio of 3). The hollow AuNPs/CNTs/SPAN/GCE also demonstrated excellent stability and selectivity against interferences from other electroactive species. The sensor was further applied to determine H₂O₂ in disinfectant real samples.     

Phenylboronate‐diol crosslinked polymer/SWCNT hybrid gels with reversible sol–gel transition

This work demonstrates the successful incorporation of functionalized single‐walled carbon nanotubes (f‐SWCNTs) into the phenylboronate‐diol crosslinked polymer gel to create a hybrid system with reversible sol–gel transition. The phenylboronic acid‐containing and diol‐containing polymers were first separately prepared by the reversible addition–fragmentation chain transfer polymerization. Covalent functionalization of single‐walled carbon nanotubes (SWCNTs) with an azide‐derivatized, diol‐containing polymer was then accomplished by a nitrene addition reaction. Subsequently, the hybrid gels were prepared by crosslinking the mixture of f‐SWCNTs and diol‐containing polymer with the phenylboronic acid‐containing polymer. The hybrid gel has been characterized by scanning electron microscopy (SEM) and rheological analysis. The SEM measurement demonstrated a homogeneous dispersion of f‐SWCNTs within the gel matrices. Rheological experiments also demonstrated that the hybrid gel exhibited storage moduli significantly higher than those of the native gel obtained from the phenylboronic acid‐containing and diol‐containing polymers. The hybrid gel can be switched into their starting polymer (f‐SWCNTs) solutions by adjusting the pH of the system. Moreover, the hybrid gel revealed a self‐healing property that occurred autonomously without any outside intervention. By employing this dynamic character, it is possible to regenerate the used gel, and thus, it has the potential to perform in a range of dynamic or bioresponsive applications Copyright © 2013 John Wiley & Sons, Ltd.     

Antiaromaticity to Aromaticity: From Boroles to 1,2‐Azaborinines by Ring Expansion with Azides

We have exploited the reactivity of antiaromatic boroles, gaining access to aryl‐substituted monocyclic 1,2‐azaborinines. The observed ring‐expansion reaction of inherently electron‐deficient boroles with organometallic and organic azides is demonstrated for representative examples. This substance class is expected to provide a new avenue into 1,2‐azaborinine chemistry, especially in the area of functional organoboron materials. Our results are based on NMR and UV/Vis spectroscopy as well as single‐crystal X‐ray crystallography and provide a virtually quantitative approach that also offers numerous points of variation.     

单壁碳纳米管上毒性苯气体净化的分子模拟(英文)

采用巨正则系综蒙特卡罗(GCMC)方法研究了空气中微量苯组分在单臂碳纳米管(SWNTs)上的吸附净化.模拟表明,具有较大孔径的(20,20)纳米管比较适合吸附纯苯蒸汽,而对于移除空气中的毒性苯物质,苯的吸附选择性分别在(12,12)纳米管及4.0 MPa时和(18,18)纳米管及0.1 MPa时出现最小值和最大值.为了解释这一异常行为,我们进一步分析了N2-O2-C6H6混合物的局部密度分布、吸附分子构型和概率密度分布,发现(18,18)纳米管内外完全被苯分子占据,而对于(12,12)纳米管,由于存在更强的吸附质-吸附剂相互作用,空气分子更倾向于吸附在管与管之间的间隙.此外,吸附分子的空间有序参数表明大多数苯分子采取"平躺"在纳米管表面的定位,而线性的N2和O2分子则多数平行于孔轴方向.最后研究了温度和苯分子主体相浓度对分离效果的影响.我们发现较大孔中的选择性随着温度的增加比小孔下降更加明显.与此对比,主体相苯浓度对小孔中的选择性起到更加重要的作用.     

水热-溶胶-凝胶法合成多壁碳纳米管-Na3V2（PO4）3复合物及其作为锂离子电池正极材料的性能

采用水热和溶胶-凝胶相结合的方法,制备了具有良好电化学性能的新型多壁碳纳米管-Na₃V₂（PO₄）₃（MWCNT-NVP）复合材料（MWCNT的质量分数为8.74%）. 通过场发射扫描电子显微镜表征可知,MWCNT分散在NVP纳米颗粒之间,并起到“电子导电线”的作用. 与纯Na₃V₂（PO₄）₃相比,MWCNT-NVP具有更高的比容量和更优异的循环性能. 在0.2C（35.2 mA·g^-1）的电流密度下,3.0-4.5 V的电压范围内,MWCNT-NVP的初始比容量为82.2 mAh·g^-1. 循环100次以后,比容量为72.3 mAh·g^-1. 在1.0-3.0 V充放电时,MWCNT-NVP的初始容量为100.6 mAh·g^-1. 100次循环以后,其容量保持率高达90%. 同时,交流阻抗测试表明,由于MWCNT的存在,MWCNT-NVP的导电性有了显著的提高. 以上结果表明,MWCNT-NVP是一种良好的锂离子电池电极材料.     

锂离子电池片状四氧化三钴负极的合成及改性

采用液相沉淀法结合低温固相热解法合成了锂离子电池片状Co3O4负极.通过X射线粉体衍射(XRD)、Brunauer-Emmett-Teller(BET)比表面积分析、扫描电子显微镜(SEM)及恒电流充放电等表征手段,发现该Co3O4为立方相,结晶完整且无杂质,由直径为1.5-3.0μm、厚度约为100-300 nm的不规则片状颗粒组成,比表面积约为30.5 m2·g-1;其比容量高且容量保持率好,在0.1C倍率下,首次放电容量高达1444.5 mAh·g-1,50次循环后充电容量仍大于1100.0 mAh·g-1;但在高倍率(1C)下,50次循环后充电容量保持率仅为75.3%,倍率性能一般.故采用碳纳米管(CNTs)掺杂改性,结果表明:在1C倍率下,70次循环后复合材料充电容量保持率为96.3%;在2C倍率下,50次循环后充电容量保持率仍高达97.0%,倍率性能显著提升.