3—磺基—4—羟基香豆素希土化合物的合成及性质

在不同条件下制得三种类型的希土与3-磺基-4-羟基香豆素(H_2SHC)化合物,元素分析确定了它们的组成分别为Ln(HSHC)_3·9H_2(Ln=La,Pr,Nd,Gd,Dy,Er,Yb,Y),Ln_2(SHC)_3.nH_2O(Ln:La,Pr,Nd,Sm,Gd,N:4或6)和Na,Ln(3HC),·H:O(Ln:Er,Yb).并通过它们的摩尔电导戌\重,溶解度,红外光谱和电子吸收光谱对各种化合物进行了结构和性质的研究。     

新试剂3,5—二溴—4—偶氮8—羟基喹啉苯基荧光酮光度法测定微量铝

在溴化十六烷基三甲胺（ＣＴＭＡＢ）存在下，ＰＨ６，０的ＨＡｃ－ＮａＡｃ缓冲介质中，铝与新试剂３，５－二溴－４－偶氮８－羟基喹啉苯基荧光酮形成红色三元胶束配合物，最大吸收波长位于５６４ｎｍ，表观摩尔吸光系数ε为１．３５×１０＾５．ｍｏｌ＾－１．ｃｍ＾－１，铝浓度在０～５μｇ／２５ｍＬ范围内符合比耳定律，拟定的方法用于铝铁黄铜中微量铝的测定，结果满意。     

Increase of Calcium Levels at Interphase in NIH 3T3 Cells

The fluorescent calcium ion indicator dye Fluo-3 and DNA-binding dye Hoechst 33342 were employed to determine, in a quantitative microspectrofluorometric study, the intracellular calcium ion concentration ([Ca~(2+)]_i) and the DNA content of individual living NIH3T3 cells. The well-separated excitation and emission properties of these dyes allowed us to establish for each cell both the phase of the cell cycle using DNA content and [Ca~(2+)]_i. We found that the transition from G_1, through S, to the G_2 phase is accompanied by a two-fold increase in [Ca~(2+)]_i. The [Ca~(2+)]_i was inhomologous in each phase of the interphase (G_1, S and G_2) although [Ca~(2+)]_i in the S and G_2 phases was never lower than certain threshold values in the G_1 and S phases respectively. [Ca~(2+)]_i in G_0 cells was lower than that in G_2 cells. These changes in [Ca~(2+)]_i suggest that [Ca~(2+)]_i may be an import regulator of cell cycle progression.     

Ni-SDC固体氧化物燃料电池阳极的合成和性质

采用柠檬酸-硝酸盐溶胶-凝胶低温自蔓延燃烧法制备氧化镍（NiO）粉末和Ce0.8Sm0.2O1.9（SDC）粉末，并将NiO与SDC按不同质量比和不同制备工艺制备了固体氧化物燃料电池（SOFC）的阳极前身。再用自组装的还原装置将其在820℃经2．5h还原后，采用四端子法测量其电导率值。分析了阳极片电导率与阳极片微结构、Ni的质量百分数、混合研磨时间及烧结温度之间的关系。结果显示，阳极片的电导率强烈依赖于镍含量和制备工艺。     

高分散纳米二氧化钛混合晶体的合成、结构与光催化性能

Using TiCl₄ and urea as the raw materials and nanometric carbon black as plate, nanometric mix-crystals of rutile and anatase TiO₂ were prepared at 100 ℃ for 10～180 min by homogeneous precipitation method. The effects of pH on the ratio of nanometer TiO₂ mix-crystals were also discussed. TEM measurement indicates that the TiO₂ is spherical particles, and the average diameter of the particles is 20 nm. XRD and TG-DTA were also used to characterize the nanometer mix-crystal materials. The photocatalytic experiment show that the mix-crystal material has the best photocatalytic reactivity. After being irradiated under the sunlight for 40 min, the compound can completely degrade the acid-red 3R.     

不同方法掺杂Au对纳米α-Fe2O3气敏性能的影响

分别采用共沉淀法、浸渍法、紫外辐照法制备了掺杂不同Au含量的α-Fe2O3纳米粉体,并制作了旁热式厚膜型气敏元件.用XRD、TG-DTA和TEM技术对纳米晶的晶型、晶粒大小及形貌进行了表征.考察了掺杂方法、Au含量及焙烧温度对α-Fe2O3气敏性能的影响.结果表明,采用三种方法掺杂适量Au后,都使α-Fe2O3的气敏性有了显著提高,其中采用共沉淀法,在400℃焙烧的Au质量分数为1.5%的α-Fe2O3的气敏性最佳.     

新型1,2,4-三唑并[3,2-d][1,5]苯并氧氮杂-2-酮的合成

取代苯并二氢吡喃 4 酮 ( 1)的芳腙在冰醋酸中与KNCO发生 [3 2 ]环加成反应 ,加成产物经KMnO4氧化开环得偕偶氮异氰酸酯 ( 3 ) .3在HBF4的催化下发生环化 -重排反应 ,合成得到一系列新型 6 7 5三环系 1,2 ,4 三唑并 [3 ,2 d] [1,5 ]苯并氧氮杂 2 酮 ( 5a～ 5g) .由X单晶衍射测定了化合物 5a的晶体结构     

La2Zr2O7催化剂结构相变对甲烷氧化偶联反应性能的影响

采用共沉淀法并通过改变焙烧温度制备了一系列具有不同晶相结构的La₂Zr₂O₇催化剂，在微型固定床反应器上评价其甲烷氧化偶联反应性能，并利用XRD、Raman、CO₂-TPD、XPS等表征手段，探究催化剂的物相结构、表面碱性以及表面氧物种的变化规律。结果表明，随着焙烧温度从700℃逐渐升高到1200℃，La₂Zr₂O₇催化剂结晶度不断提高，晶相发生明显变化，从无定形结构逐渐向缺陷萤石结构过渡，最终转变成烧绿石结构。焙烧温度提高促使La₂Zr₂O₇晶相转变过程中，催化剂表面的碱性强度减弱，中等碱性位数量以及具有催化活性的表面氧物种O₂^2-和O₂^-的相对含量不断减少，致使催化剂的CH₄转化率和C₂₊选择性不断降低。其中，无定形LZO-CP-700催化剂表现出最佳的甲烷氧化偶联反应性能。     

壳聚糖-聚羟基丁酸酯共混膜的制备与性质

以乙酸为共溶剂,制备了壳聚糖-聚羟基丁酸酯(CTS-PHB)共混膜,利用红外光谱(FT-IR)、广角X粉末衍射(WAXD)、扫描电镜(SEM)及差热分析(DTA)表征了共混膜的化学组成、晶形、形貌和热稳定性能。研究表明:CTS和PHB可在体积百分数为62.5%的乙酸溶液中共混,形成表面光滑、不透明的膜,干态共混膜具备一定的力学强度。各比例的CTS-PHB共混膜有相同的热分解温度,共混膜的形貌特征随两组分质量配比变化,其中mPHB/mCTS=1/1的共混膜显示出良好的有序结构。     

Chemical analysis of acidic silicon etch solutions: I. Titrimetric determination of HNO3, HF, and H2SiF6

The chemical etching of silicon using HF-HNO₃ mixtures is a widely used process in the processing of silicon wafers for microelectronic or photovoltaic applications. The control of the etch bath composition is the necessary condition for an effective bath utilization, for the replenishment of the consumed acids, and to maintain a certain etch rate. The present paper describes two methods for the total analysis of the individual etch bath constituents HF, HNO₃, and H₂SiF₆. Both methods start with an aqueous acid-base titration determining the total acid concentration and the concentration of H₂SiF₆. The first method is an acid-base titration using a 0.1 mol L⁻¹ methanolic solution of cyclohexylamine (CHA) as non-aqueous titrant to determine the content of nitric acid. Then, the amount of hydrofluoric acid is calculated from the difference between the total acid and nitric acid content. The second method is based on the determination of the total fluoride concentration using a fluoride ion-selective electrode (F-ISE). The content of hydrofluoric acid is obtained from the difference between the total fluoride content and the amount of fluoride bound as H₂SiF₆. The amount of nitric acid results finally calculated as difference to the total acid content.