1-(2-苯并噻唑)-3-(4-偶氮苯基)-三氮烯与汞的显色反应研究及应用

研究了新试剂１－（２－苯并噻唑）－３－（４－偶氮苯基）－三氮烯（ＢＴＰＡＰＴ）与汞的显色反应．在Ｔｗｅｎ－８０存在下，ｐＨ为１１．２０时，Ｈｇ（Ⅱ）与试剂生成红色的１∶１型配合物，最大吸收峰位于５１０ｎｍ，表观摩尔吸光系数为１．１０×１０５Ｌ·ｍｏｌ－１·ｃｍ－１，线性范围０－１４μｇ／２５ｍＬ．建立了可用于饮用水、生活用水和工业废水汞含量测定的方法．     

铕离子探针研究Al2O3的相变过程

氧化铝具有许多重要的工业用途，而制备高热稳定活性氧化铝的技术也在不断地发展[1，2]，因此，研究其高温烧结下的相变过程很有意义．离子深法作为新型测试手段，已成功地用于生物大分子结构与功能研究方面［‘］，而在固体材料测试中的应用尚未见报道．我们以EU’“作为荧光探针，并结合＊＊D和＊nR研究了川对。在不同烧结温度下的相变过程．1实验部分样品的制备采用复盐分解法．先将Elf刀s用高纯硝酸溶解定容．以占AlzO。重量1％的量加入到硫酸铝锭溶液中，进行超声处理，冷冻干燥．再依次登于900”C、1000C、1100C、1200C的高温炉…     

铑（Ⅲ）－钼酸盐－罗丹明B显色体系的研究和应用

在聚乙烯醇（ＰＶＡ）存在下，铑（Ⅲ）与钼酸盐和罗丹明Ｂ（ＲＢ）形成离子缔合物，缔合物的最大吸收位于５８０ｎｍ，摩尔吸光系数ε值１．６８×１０５Ｌ·ｍｏｌ－１·ｃｍ－１，服从比耳定律范围０～１０μｇＲｈ／２５ｍＬ，方法用于催化剂和冶金产品中铑的测定，结果满意     

Novel flow injection-fluorometric method for the determination of trace silicate and its application to ultrapurified water analysis

A highly sensitive fluorescence quenching method for the determination of silicate based on the formation of an ion associate between molybdosilicate and Rhodamine B (RB) in nitric acid medium was developed. A flow injection system coupled with a fluorescence detector was used for the measurement of fluorescence intensity at 560 and 580 nm as excitation and emission wavelengths, respectively. The calibration graph for Si showed a linear range of 0.1–5 ng cm⁻³ with correlation coefficient of 0.9999, and the detection limit of 0.06 ng cm⁻³. The proposed method was successfully applied to the determination of silicate in ultrapurified water with satisfactory results.     

金属富勒烯La＠C_（2n）的合成、提取及其ESR和MS表征

采用对掺入Ｌａ_２Ｏ_３的石墨棒原位活化并结合交换电极回放方法制备了产率较高的金属富勒烯，并用甲苯高温热提取的方法有效地提取出Ｌａ＠Ｃ_（２ｎ），其中Ｌａ＠Ｃ_（７４）为可溶性金属富勒烯增加了新成员．同时，首次采用解吸电子轰击质谱对提取物进行了表征，讨论了提取物的ＥＳＲ谱．     

聚合物连续分级

本文较系统地介绍了聚合物连续分级的理论基础、实验室装置及其实际应用。     

核磁共振法测定高聚物的结构—核磁共振二维谱

介绍了核磁共振(NMR)波谱,尤其是核磁共振二维谱(2D NMR)在最近几年内的进展。内容包括怎样用NMR测定高聚物的序列分布、共聚物结构、聚合物的混溶性、聚合物液晶的取向度、分子量、短链度和长链支化度、凝聚态高聚物的多相结构等。     

A column packing for isothermal gas chromatographic analysis of C1−C5 paraffins and monoolefins and dimethyl ether

Summary An analytical GC method was developed which uses a single packed column consisting of three packings in series prepared with the following liquid phases: dimethyl sulfolane, propylene carbonate, and silver nitrate. This system provides satisfactory resolution of mixtures of C₁–C₅ hydrocarbons and dimethyl ether obtained when converting methanol to gasoline. Due to the high capacity of the column it is possible to inject larger sample amounts permitting trace analysis.     

高分散纳米二氧化钛混合晶体的合成、结构与光催化性能

Using TiCl₄ and urea as the raw materials and nanometric carbon black as plate, nanometric mix-crystals of rutile and anatase TiO₂ were prepared at 100 ℃ for 10～180 min by homogeneous precipitation method. The effects of pH on the ratio of nanometer TiO₂ mix-crystals were also discussed. TEM measurement indicates that the TiO₂ is spherical particles, and the average diameter of the particles is 20 nm. XRD and TG-DTA were also used to characterize the nanometer mix-crystal materials. The photocatalytic experiment show that the mix-crystal material has the best photocatalytic reactivity. After being irradiated under the sunlight for 40 min, the compound can completely degrade the acid-red 3R.     

不同方法掺杂Au对纳米α-Fe2O3气敏性能的影响

分别采用共沉淀法、浸渍法、紫外辐照法制备了掺杂不同Au含量的α-Fe2O3纳米粉体,并制作了旁热式厚膜型气敏元件.用XRD、TG-DTA和TEM技术对纳米晶的晶型、晶粒大小及形貌进行了表征.考察了掺杂方法、Au含量及焙烧温度对α-Fe2O3气敏性能的影响.结果表明,采用三种方法掺杂适量Au后,都使α-Fe2O3的气敏性有了显著提高,其中采用共沉淀法,在400℃焙烧的Au质量分数为1.5%的α-Fe2O3的气敏性最佳.