4-苯基-1,3-硒唑衍生物的合成及其对蛋白酪氨酸磷酸酯酶-1B抑制活性

蛋白酪氨酸磷酸酯酶-1B(PTP1B)是抗糖尿病治疗的重要靶点,因此创制活性优良的PTP1B抑制剂具有重要意义。 本文设计并合成了11个含1,3-硒唑和1,2,4-三唑活性组块新型结构目标分子(ZLXZ1-ZLXZ11),并利用傅里叶变换红外光谱仪(FTIR)、核磁共振波谱仪(NMR)和高分辨质谱(HRMS)等对其进行了结构表征。 首先选择ZLXZ1和ZLXZ11在MOE 2015.10程序上,与PTP1B进行分子对接模拟,结果表明,在ZLXZ1分子中硒唑环上的硒原子与PTP1B中副催化位点Tyr46、Ala217、Lys120和Asp 48分别形成了π-H作用和氢键作用。 在ZLXZ11分子中硒唑上的硒原子与PTP1B中Asp181、Arg221和Asp48形成了氢键作用。 在分子对接模拟的基础上,测试了11个目标分子的抑制活性,结果表明,所有目标分子的抑制率均在87.02%以上,其中3个目标分子PTP1B抑制活性高于阳性参照物齐墩果酸,抑制活性优良,有望成为潜在的PTP1B抑制剂。     

Control of Excited‐State Conformations in B,N‐Acenes

We present a new concept to control the conformations of molecules in the excited state through harvesting negative hyperconjugation. The strategy was realized with the 2,3,1,4‐benzodiazadiborinane scaffold, which was prepared by a new synthetic procedure. Photochemical studies identified dual light emission, which was assigned to well‐defined conformers. The emission at longer wavelength can be switched off by restricting the rotational degrees of freedom in the solid state as well as by controlling the energy levels of the excited states through adjusting the solvent polarity.     

One-step synthesis of porous PtNiCu trimetallic nanoalloy with enhanced electrocatalytic performance toward methanol oxidation

Pt-based alloy nanoporous structures have attracted a lot of attention because of their high activity and stability toward alcohol oxidation reactions. Especially, Pt alloying with Earth-abundant metal can lower the cost of catalyst. Here, we introduce a one-pot approach to synthesize bimetallic PtCu and Ni-doped PtCu nanoalloy with porous structure. The as-synthesized Ni-doped Pt₆₀Ni₃Cu₃₇ nanoalloys exhibit excellent electrocatalytic properties toward methanol oxidation in acidic medium. The mass activity of the as-synthesized Pt₆₀Ni₃Cu₃₇ nanoalloys is 3.6 times and 5.3 times that of Pt₅₅Cu₄₅ nanoalloys and commercial Pt black for methanol oxidation in 0.2?M methanol solution. Besides, the stability of the as-synthesized Pt₆₀Ni₃Cu₃₇ nanoalloys was much better than Pt₅₅Cu₄₅ nanoalloys and commercial Pt black. After 3600?s chronoamperometry test, the remaining values of the Pt₆₀Ni₃Cu₃₇ nanoalloys are 3.7 times and 11.0 times that of Pt₅₅Cu₄₅ nanoalloys and commercial Pt black. And it is the first time to report that small amount of Ni dopants can boost the activity and stability of PtNiCu alloys toward methanol oxidation.     

A highly sensitive and selective fluorescent probe for Fe3+ containing two rhodamine B and thiocarbonyl moieties and its application to live cell imaging

A novel turn-on rhodamine B-based fluorescent chemosensor (RBCS) was designed and synthesized by reacting N-(rhodamine B)lactam-1,2-ethylenediamine and carbon disulfide. Upon addition of Fe³⁺ in EtOH/H₂O solution (2:1, v/v, HEPES buffer, 0.6?mM, pH 7.20), the RBCS displayed a significant fluorescence enhancement at 582?nm and a dramatic color change from colorless to pink, which can be detected by the naked eye. Significantly, the RBCS exhibited a highly selective and sensitive ability toward Fe³⁺. The detection limit of the probe was 2.05?×?10^?7?M. Job's plot indicated the formation of 1:1 complex between the RBCS and Fe³⁺. Moreover, the practical use of the RBCS is demonstrated by its application in the detection of Fe³⁺ in HeLa cells.     

Effect of anodizing conditions on the cell morphology of anodic films on AA2024-T3 alloy

The effects of applied current density, anodizing time, and electrolyte temperature on the cell and pore morphology of anodic films and the voltage-time response obtained during galvanostatic anodizing of AA2024-T3 alloy in sulphuric acid electrolytes have been studied. Scanning electron microscopy was employed to observe the film morphology. Sponge-like porous structure was promoted by anodizing at relatively low current density and high electrolyte temperature. In contrast, linear porous structure was favoured under the converse conditions. Intermediate conditions resulted in films containing either sequential layers of the 2 morphologies or a morphology incorporating features of the 2 types; such conditions were associated with anodizing voltages in the range 25 to 35 V. The reasons for the morphological differences are proposed to be due to interactions between film growth stresses and stresses arising from oxygen evolution on the development of the alumina cells.     

Crystal Structures and Electrochemical Properties of R1.5Ca1.5MgNi14(R=Nd,Gd and Er)Hydrogen Storage Alloys

Ca₃MgNi₁₄, Nd_1.5Ca_1.5MgNi₁₄, Gd_1.5Ca_1.5MgNi₁₄ and Er_1.5Ca_1.5MgNi₁₄ alloys were prepared by high frequency induction melting and sintering. Characterization and analysis were performed by X-ray diffraction/Rietveld full-spectrum fitting, gaseous P-C-T hydrogen storage test and electrochemical properties tests. It can be found that all alloys consist of Gd₂Co₇-type 3R phase and Ce₂Ni₇-type 2H phase. Although the hydrogen storage capacities of Nd_1.5Ca_1.5MgNi₁₄, Gd_1.5Ca_1.5MgNi₁₄ and Er_1.5Ca_1.5MgNi₁₄ decrease to some extent compared to that of Ca₃MgNi₁₄, their equilibrium pressures for absorption and desorption increase markedly. Moreover, R_1.5Ca_1.5MgNi₁₄ alloys have better cycling stabilities and high-rate discharge(HRD) properties as compared to Ca₃MgNi₁₄. The hydrogen diffusion in alloy electrodes is the main factor to influence the HRD performance.     

含能材料六硝基六氮杂异伍兹烷分子的B3LYP研究

在B3LYP/6-31G^**水平上对六硝基六氮杂异伍兹烷(CL-20)分子进行结构优化、集居数分析、自然键轨道和振动频率计算,得到与实验值相符的稳定构型.根据计算结果,讨论了键特性对分子性质的影响.     

Norditerpenoid Alkaloids from the Roots of Aconitum hemsleyanum Pritz.var.Pengzhouense

In continuation of our studies on Aconitum hemsleyanum Pritz.var. pengzhouense, two new norditerpenoid alkaloids, pengshenines A(1) and B(2),have isolated from the roots of the plants and their strucures were elucidated by 1D-and 2D-NMR.     

Two New Steroidal Saponins from Tacca plantaginea

Two new C27 steroidal glycosides, named taccaoside A(1) and B(2), were isolated from the traditional Chinese herb Tacca plantaginea. The spectroscopic and chemical evidences revealed their structures to be 26-O-β-D-glucopyranosyl-(25R)-3β,26-dihydroxy furost-5,20-diene-3-O-[α-L-rhamnopyranosyl(1→2)]-[α-L-rhamnopyranosyl(1→3)]-β-D-glucopyranoside(1) and 26-O-β-D-glucopyranosyl-(25R)-3β,26-dihydroxy furost-5,20-diene-3-O-[α-L-rhamnopyranosyl-(1→2)]-[β-D-glucopyranosyl(1→3)-α-L-rhamnopyranosyl(1→3)]-β-D-glucopyranoside(2),respectively.