金属配合物高效液相色谱法测定人发和血清中锌,钴,铜的含量

选用8-羟基喹啉为配合剂，经柱前衍生后高效波相色谱法分离测定，建立了人发和血清中微量元素锌、钴、铜的含量测定方法，该法配合产物稳定性好，标准曲线的线性范围锌、铜均为0．8～4．0mg／L，钴为0．1～2．0mg／L，相关系数均0．999以上，批内、批间相对标准偏差均小于5％，加样回收率锌为（100．3±0.47）％，钴为（98．9±2．07）％，铜为（100.9±0．65）％。     

硅胶键联MPc的制备及其在氧活化中的作用

过渡金属酞等配合物（MPC）用手均相液相氧化中作催化剂已有不少报导，象许多均相催化剂一样，MPC用于均相反应存在着难于从反应体系中分离出来的问题．把均相配合物催化剂固载在无机氧化物如硅股或有机高分子载体上是解决这一问题的一种方法．我们曾尝试把MP。固载在分子筛载体和硅胶载体上，并用ESR研究其对O2的活化作用[1，2]．本文报导MPc通过共价键键联固载在SiO2上，并研究其对O2的活化作用．1实验部分1．1试剂HSIC13为日本东京化成株式会社产品，二级试剂·发烟硫酸（SO。质量分数大于20％）为分析纯试剂．PCl5为化学纯试…     

Synthesis and peptide-binding properties of a luminescent pyrimidine zinc(II) complex

The synthesis and peptide-binding properties of a Zn(II)nitrilotriacetate complex substituted with pyrimidine hydrazine amides are reported. The metal complex provides millimolar binding affinity in aqueous buffer to peptides bearing N-terminal His. The pyrimidine heterocycles intermolecularly interact with the bound peptide and quench the emission of nearby Trp residues by energy transfer.     

New approaches to enantioselective fluorination: Cinchona alkaloids combinations and chiral ligands/metal complexes

The selective construction of carbon-fluorine bonds is of great interest to medicinal chemists because the replacement of a hydrogen or an oxygen atom with a fluorine atom in biologically active molecules can confer the molecules with improved physicochemical properties and biological activities. Since the first discovery of enantioselective fluorination using N-fluorocamphorsultam, our synthetic interest had been focused on the development of chiral N-fluorosulfonamide derivatives capable of enantioselective fluorination. However, these initial efforts revealed several limitations in both chemical yields and enantioselectivities of the fluorinated products. We present here the background of our personal story of the enantioselective fluorination reaction and some successful applications of the methods to the design and synthesis of biologically active products. Two novel approaches using cinchona alkaloid/Selectfluor^® combinations and chiral ligands/metal complexes have been pursued, respectively. In addition, the recent advances in this area by other groups are also described briefly.     

Unnatural multidentate metal ligating α-amino acids

A family of penta- and hexadentate metal ligating α-amino acids, suitably protected for Fmoc solid-phase chemistry, has been prepared. These residues incorporate the mono-amides of ethanolaminetriacetic acid, ethylenediaminetriacetic acid, and ethylenediaminetetraacetic acid as side chains. Side chains are tethered varying distances (n) from the Cα-carbon to allow metal binding events to occur at distinct distances from the peptide backbone. These residues are designed to allow the facile installation of metal chelates along a peptide backbone.     

Solvothermal synthesis of new metal organic framework structures in the zinc-terephthalic acid-dimethyl formamide system

Two new metal organic framework (MOF) structures have been obtained from the Zn-terephthalic acid (H₂BDC)-dimethyl formamide (DMF) system and examined by single-crystal X-ray diffraction: Zn(C₈H₄O₄)(C₃H₇NO), 1, monoclinic C2/m, a=11.1369(5), b=14.0217(7), , β=106.316(1)°, , , Z=4, R₁=0.060, wR₂=0.169, S=1.27; Zn(HCO₂)₃(C₂H₈N), 2, trigonal , a=8.1818(1), , , , Z=6, R₁=0.014, wR₂=0.039, S=1.11. Contrary to previously published structures in the same system, the crystals were obtained by solvothermal synthesis at 381 K. Structure 1 consists of 2-D layers stacked in an offset manner to accommodate DMF moieties coordinated to Zn²⁺ within voids in adjacent layers. Structure 2 consists of a 3-D network constructed from Zn²⁺ ions bridged by deprotonated formic acid moieties. Over time, the structure of 1 rearranges to Zn(C₈H₄O₄)(C₃H₇NO)(H₂O) [monoclinic P2₁/n, a=6.6456(2), b=15.2232(5), , β=104.110(2)°, , , Z=4, R₁=0.048, wR₂=0.100, S=1.07], which is identical to the known MOF-2 structure, obtained by crystallization at ambient conditions. The three structures were determined from crystals with similar crystal habits picked from a single solvothermal synthesis batch. The study demonstrates that MOF syntheses can give not only multiple crystal structures under different conditions, but also that numerous different structures, including some that are metastable, can be formed under identical conditions.     

Hydrogen analysis in solid samples by utilizing He metastable atoms induced by TEA CO2 laser plasma in He gas at 1 atm

A TEA CO₂ laser (350 mJ–1.5 J, 10.6 μm, 200 ns, 10 Hz) was focused onto a metal sub-target under He as host gas at 1 atmospheric pressure with a small amount of impurity gas, such as water and ethanol vapors. It was found that the TEA CO₂ laser with the help of the metal sub-target is favorable for generating a strong, large volume helium gas breakdown plasma at 1 atmospheric pressure, in which the helium metastable-excited state was then produced overwhelmingly. While the metal sub-target itself was never ablated. The helium metastable-excited state produced after the strong helium gas breakdown plasma was considered to play an important role in exciting the atoms. This was confirmed by the specific characteristics of the detected H emission, namely the strong intensity with low background, narrow spectral width, and the long lifetime. This technique can be used for gas and solid samples analysis. For nonmetal solid analysis, a metal mesh was introduced in front of the nonmetal sample surface to help initiation of the helium gas breakdown plasma. For metal sample, analysis can be carried out by combining the TEA CO₂ laser and an Nd–YAG laser where the Nd–YAG laser is used to ablate the metal sample. The ablated atoms from the metal sample are then sent into the region of helium gas breakdown plasma induced by the TEA CO₂ laser to be excited through the helium metastable-excited state. This technique can be extended to the analysis of other elements, not limited only to hydrogen, such as halogens.     

低温加氢催化剂的设计: 理论与实践

简要总结了我们在C=C及C=O双键低温加氢双金属催化剂方面的最新研究成果. 首先, 我们以环己烯加氢为探针反应, 证明了平行使用多种研究手段的重要性, 包括单晶表面的基础研究与DFT计算, 多晶表面的合成与表征, 负载型催化剂的制备与性能测试等. 其次, 总结了双金属催化剂在其他加氢反应, 如丙烯醛C=O双键的选择性加氢, 苯的低温加氢, 以及乙炔的选择性加氢等反应中的应用. 最后, 讨论了利用金属碳化物代替贵金属Pt以减少双金属催化剂中Pt用量的可能性.     

The characterization of silica microparticles by electrophoretic mobility measurements

Summary Electrophoretic mobility measurements in the pH 2‐10 range are described for several commercial HPLC silica microparticles and a laboratory-produced product. The content of metal impurities for the silicas was also determined by AAS. An acidic/hydrothermal treatment was used to generate a more homogenous surface for some of the silicas. The zero points of charge (zpc) for both a native and a treated silica plus several commercial HPLC silicas were compared. The electrophoretic mobility method may be useful in predicting the utility of certain types of silica supports for chromatographic separations.     

金属基上以YSZ为过渡层的YBCO薄膜的微观结构

采用透射电子显微术（ＴＥＭ），研究了用磁控溅射技术在柔性金属基体上制备的、钇稳定的ＺｒＯ２（ＹＳＺ）为过镀层的ＹＢａ２Ｃｕ３Ｏ７－ｙ（ＹＢＣＯ）薄膜的横断面结构。所得ＹＢＣＯ膜的超导临界转变温度Ｔｃ为９１Ｋ，临界电流密度Ｊｃ＝２×１０３Ａ／ｃｍ２（７７Ｋ，０Ｔ）。基体为Ｎｉ基合金（ＨａｓｔｅｌｏｙＣ）。ＹＳＺ层为致密、均匀的细晶组织，约１２μｍ厚，具有织构取向，并与基体紧密连接。ＹＢＣＯ层的厚度不均匀，约５００ｎｍ；ＹＢＣＯ／ＹＳＺ界面有时连接较差，在该界面上有杂质出现，杂质有可能引发裂纹。