Autoignition of surrogate fuels at elevated temperatures and pressures

Autoignition of Jet-A and mixtures of benzene, hexane, and decane in air has been studied using a heated shock tube at mean post-shock pressures of 8.5 ± 1 atm within the temperature range of 1000–1700 K with the objective of identifying surrogate fuels for aviation kerosene. The influence of each component on ignition delay time and on critical conditions required for strong ignition of the mixture has been deduced from experimental observations. Correlation equation for Jet-A ignition times has been derived from the measurements. It is found that within the scatter of experimental data dilution of n-decane with benzene and n-hexane leads to slight increase in ignition times at low temperatures and does not change critical temperatures required for direct initiation of detonations in comparison with pure n-decane/air mixtures. Ignition times in 20% hexane/80% decane (HD), 20% benzene/80% decane (BD) and 18.2% benzene/9.1% hexane/72.7% decane (BHD) mixtures at temperature range of T  1450–1750 K correlate well with induction time of Jet-A fuel suggesting that these mixtures could serve as surrogates for aviation kerosene. At the same time, HD, BD and BHD surrogate fuels demonstrate a stronger autoignition and peak velocities of reflected shock front in comparison with Jet-A and n-decane/air mixtures.     

On laminar premixed flame propagating into autoigniting mixtures under engine-relevant conditions

Usually premixed flame propagation and laminar burning velocity are studied for mixtures at normal or elevated temperatures and pressures, under which the ignition delay time of the premixture is much larger than the flame resistance time. However, in spark-ignition engines and spark-assisted compression ignition engines, the end-gas in the front of premixed flame is at the state that autoignition might happen before the mixture is consumed by the premixed flame. In this study, laminar premixed flames propagating into an autoigniting dimethyl ether/air mixture are simulated considering detailed chemistry and transport. The emphasis is on the laminar burning velocity of autoigniting mixtures under engine-relevant conditions. Two types of premixed flames are considered: one is the premixed planar flame propagating into an autoigniting DME/air without confinement; and the other is premixed spherical flame propagating inside a closed chamber, for which four stages are identified. Due to the confinement, the unburned mixture is compressed to high temperature and pressure close to or under engine-relevant conditions. The laminar burning velocity is determined from the constant-volume propagating spherical flame method as well as PREMIX. The laminar burning velocities of autoigniting DME/air mixture at different temperatures, pressures, and autoignition progresses are obtained. It is shown that the first-stage and second-stage autoignition can significantly accelerate the flame propagation and thereby greatly increase the laminar burning velocity. When the first-stage autoignition occurs in the unburned mixture, the isentropic compression assumption does not hold and thereby the traditional method cannot be used to calculate the laminar burning velocity. A modified method without using the isentropic compression assumption is proposed. It is shown to work well for autoigniting mixtures. Besides, a power law correlation is obtained based on all the laminar burning velocity data. It works well for mixtures before autoignition while improvement is still needed for mixtures after autoignition.     

Effects of NOx addition on autoignition and detonation development in DME/air under engine-relevant conditions

Exhaust gas recirculation (EGR) technology can be used in internal combustion engines to reduce NOx emission and improve fuel economy. However, it also affects the end-gas autoignition and engine knock since NOx in EGR can promote ignition. In this study, effects of NOx addition on autoignition and detonation development in dimethyl ether (DME)/air mixture under engine-relevant conditions are investigated. Numerical simulation considering both low-temperature and high-temperature chemistry is conducted. First the kinetic effects of NOx addition on the negative temperature coefficient (NTC) regime are assessed and interpreted. It is found that NOx addition greatly promotes both low-temperature and high-temperature ignition stages mainly through increasing OH production. Then the autoignitive reaction front propagation induced by either local NO accumulation or a cold spot within NTC regime with different amounts of NO addition is investigated. For the first time, supersonic autoignition modes including detonation induced by local NO accumulations are identified. This indicates that local accumulation of NOx in end gas might induce super-knock in engines with EGR. A new parameter quantifying the ratio of sound speed to average reaction front propagation speed is introduced to identify the regimes for different autoignition modes. Compared to the traditional counterpart parameter used in previous studies, this new parameter is more suitable since it yields a detonation development regime in a C-shaped curve which is almost unaffected by the initial conditions. The results in this study may provide fundamental insights into knocking mechanism in engines using EGR technology.