Bipyridinophane‐containing conjugated polymers modulated with an intramolecular aromatic C?H/π interaction

Bipyridinophane–fluorene conjugated copolymers have been synthesized via Suzuki and Heck coupling reactions from 5,8‐dibromo‐2,11‐dithia[3]paracyclo[3](4,4′)‐2,2′‐bipyridinophane and suitable fluorene precursors. Poly[2,7‐(9,9‐dihexylfluorene)‐co‐alt‐5,8‐(2,11‐dithia[3]paracyclo[3](4,4′)‐2,2′‐bipyridinophane)] ( P7 ) exhibits large absorption and emission redshifts of 20 and 34 nm, respectively, with respect to its planar reference polymer Poly[2,7‐(9,9‐dihexylfluorene)‐co‐alt‐1,4‐(2,5‐dimethylbenzene)] ( P11 ), which bears the same polymer backbone as P7 . These spectral shifts originate from intramolecular aromatic C? H/π interactions, which are evidenced by ultraviolet–visible and ¹H NMR spectra as well as X‐ray single‐crystal structural analysis. However, the effect of the intramolecular aromatic C? H/π interactions on the spectral shift in poly[9,9‐dihexylfluorene‐2,7‐yleneethynylene‐co‐alt‐5,8‐(2,11‐dithia[3]paracyclo[3](4,4′)‐2,2′‐bipyridinophane)] ( P10 ) is much weaker. Most interestingly, the quenching behaviors of these two conjugated polymers are largely dependent on the polymer backbone. For example, the fluorescence of P7 is efficiently quenched by Cu²⁺, Co²⁺, Ni²⁺, Zn²⁺, Mn²⁺, and Ag⁺ ions. In contrast, only Cu²⁺, Co²⁺, and Ni²⁺ ions can partially quench the fluorescence of P10 , but much less efficiently than the fluorescence of P7 . The static Stern–Volmer quenching constants of Cu²⁺, Co²⁺, and Ni²⁺ ions toward P7 are of the order of 10⁶ M^?1, being 1300, 2500, and 37,300 times larger than those of P10 , respectively. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 4154–4164, 2006     

β分式α稳定过程的1/H变差

本文主要讨论了β分式α稳定过程的1/H变差,这对关于β分式α稳定过程的随机分析是非常重要的.     

Extension of a combined analytical/numerical initial value problem solver for unsteady periodic flow

Here we describe analytical and numerical modifications that extend the Differential Reduced Ejector/ mixer Analysis (DREA), a combined analytical/numerical, multiple species ejector/mixing code developed for preliminary design applications, to apply to periodic unsteady flow. An unsteady periodic flow modelling capability opens a range of pertinent simulation problems including pulse detonation engines (PDE), internal combustion engine ICE applications, mixing enhancement and more fundamental fluid dynamic unsteadiness, e.g. fan instability/vortex shedding problems. Although mapping between steady and periodic forms for a scalar equation is a classical problem in applied mathematics, we will show that extension to systems of equations and, moreover, problems with complex initial conditions are more challenging. Additionally, the inherent large gradient initial condition singularities that are characteristic of mixing flows and that have greatly influenced the DREA code formulation, place considerable limitations on the use of numerical solution methods. Fortunately, using the combined analytical–numerical form of the DREA formulation, a successful formulation is developed and described. Comparison of this method with experimental measurements for jet flows with excitation shows reasonable agreement with the simulation. Other flow fields are presented to demonstrate the capabilities of the model. As such, we demonstrate that unsteady periodic effects can be included within the simple, efficient, coarse grid DREA implementation that has been the original intent of the DREA development effort, namely, to provide a viable tool where more complex and expensive models are inappropriate. Copyright © 2002 John Wiley & Sons, Ltd.     

The dual of a finitely generated multiplication module

This paper is based on the M. Sc. thesis written by the third author under the supervision of the first two authors. It was submitted to the University of Baghdad in 1986.     

相型同步启动时间的M／M／c排队系统

本文研究带有同步启动时间的Ｍ／Ｍ／ｃ系统，其中启动时间是相型变量，给出了稳态和等待时间分布等结果。     

Distribution of melamine in polyester–melamine surface coatings cured under nonisothermal conditions

The influence of experimental cure parameters on the diffusion of reactive species in polyester–melamine thermoset coatings during curing has been investigated with X‐ray photoelectron spectroscopy and attenuated total reflectance Fourier transform infrared. The diffusion of melamine plays a vital role in the curing process and, therefore, in the ultimate properties of coatings. At a low (<20%) hexamethoxymethylmelamine (HMMM) crosslinker concentration, the matrix composition is uniform, but at high HMMM concentrations, excess HMMM rapidly segregates to the air–coating interface. The rate of migration is governed by the difference in the surface free energies of polyester and HMMM and the concentration gradient of HMMM between the bulk and the surface. An increased rate of energy absorption also increases the rate of migration of HMMM to the surface. A physical model has been proposed to explain this surface segregation phenomenon in terms of cocondensation and self‐condensation reactions. It suggests that an appropriate amount of melamine can be segregated on the surface and allowed to self‐condense to form a desired thickness of a melamine topcoat through the control of the binder composition and cure conditions. This technique can be implemented to apply a melamine topcoat during cure. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 83–91, 2004     

Thermal conductivity of poly(vinyl chloride)/polycaprolactone blends

Thermal diffusivity, heat capacity, and density of polyvinyl chloride/polycaprolactone (PVC/PCL) blends were measured by the laser flash method, DSC, and pycnometry, respectively. The thermal conductivity of the PVC/PCL blends was determined from the results. The miscibility of the blend and crystallinity of PCL were determined by DSC. The effect of blend structure on thermal conductivity is discussed. The phase compositions of the PVC/PCL blends are of three types depending on PCL content: i.e., up to 33%, from 33 to 70%, and above 70% PCL by weight. Thermal conductivity, thermal diffusivity, and heat capacity of the PVC/PCL blends are strongly affected by the phase composition of the blend, which changes in a complicated way with PCL content. © 1994 John Wiley & Sons, Inc.     

Photooxidation of aqueous trichloroethylene using a buoyant photocatalyst with reaction progress monitored via micro-headspace GC/MS

Although photooxidation has previously been shown to be successful in removing organic contaminants from water, methods combining the rapid photooxidation of the desired contaminant with easy catalyst manipulation and removal are few and far between. In the absence of an easy means of catalyst removal, the photooxidation process becomes more costly and time consuming, and photocatalysis cannot be employed as an in situ method for the remediation of aqueous organic contaminants. In this study, the photocatalyst was added to an aqueous trichloroethylene (TCE) solution in the form of TiO₂-coated buoyant microspheres. The solution, placed in a flow-cell photoreactor along with the buoyant catalyst, was irradiated with a UV-filtered Xenon light source. Limited sample sizes necessitated the development of a low-cost headspace GC/MS analysis method, utilizing a standard direct-injection autosampler. This analytical technique aptly monitored reaction progress and indicated that aqueous TCE concentration decreases by nearly 90% in the first hour of irradiation. Subsequent solvent extraction GC/MS analysis indicated that the TCE is initially sorbed by the photocatalyst spheres, but as irradiation continued, TCE is removed from the catalyst spheres surfaces. During the course of irradiation, the expected TCE mineralization product hydrochloric acid appeared, as indicated by a decrease in pH and ion chromatography analysis. The microsphere-born catalyst was easily removed from the treated solution by filtration. Thus, it is possible that a method for effective, low-cost in situ photooxidation of aqueous organic contaminants will be realized in the near future.     

鲤鱼体中鱼腥味物质的提取和鉴定

采用同时蒸馏萃取法提取鲤鱼鱼体中的挥发和半挥发性有机物，用GC／MS从提取物中分析鉴定出鱼腥味和疑是鱼腥味物质16种。包括醛、烯醛、酮和呋喃4类化合物。其中己醛、庚醛和2，4-二烯癸醛被确认为鱼腥味的化合物。研究发现，这些物质总量在鲤鱼体的鱼鳞、鱼鳃和鱼肉的分布呈现下降趋势，且其总量与鱼腥味强度之间具有可比较的对应关系。