PAN共沉淀富集原子吸收测定饮水和人发中的微量锰

使用PAN-Ni(Ⅱ)共沉淀体系分离富集、微量流向进样火焰原子吸收光谱测定饮水和人发中的微量锰。样品中的共存元素不干扰测定，锰的标准加入回收率90%-108%之间。12次重复测定锰含量为0.15μg/mL的试样溶液的变异系数为4.6%,本法简便快捷,取得了较满意的结果.     

Speciation analysis of inorganic arsenic by microchip capillary electrophoresis coupled with hydride generation atomic fluorescence spectrometry

A novel method for speciation analysis of inorganic arsenic was developed by on-line hyphenating microchip capillary electrophoresis (chip-CE) with hydride generation atomic fluorescence spectrometry (HG-AFS). Baseline separation of As(III) and As(V) was achieved within 54 s by the chip-CE in a 90 mm long channel at 2500 V using a mixture of 25 mmol l(-1) H3BO3 and 0.4 mmol l(-1) CTAB (pH 8.9) as electrolyte buffer. The precisions (RSD, n=5) ranged from 1.9 to 1.4% for migration time, 2.1 to 2.7% for peak area, and 1.8 to 2.3% for peak height for the two arsenic species at 3.0 mg l(-1) (as As) level. The detection limits (3sigma) for As(III) and As(V) based on peak height measurement were 76 and 112 microg l(-1) (as As), respectively. The recoveries of the spikes (1 mg l(-1) (as As) of As(III) and As(V)) in four locally collected water samples ranged from 93.7 to 106%.     

Characterisation of porous silica. 2. CPG-10 (VYCOR)

Porous silica CPG-10 has been characterised by adsorption of benzene before and after modification with trimethylchlorosilane. The Brunauer–Emmet–Teller (BET) specific surface areas were determined where possible. Modification of CPG-10 reduces its adsorption for benzene and hence reduces the BET specific surface area, with the extent of reduction depending on the extent of modification. For a fully modified sample with the highest surface concentration of trimethylsilyl groups, the adsorption isotherm changes from type IV of the unmodified sample to type V. The hysteresis loop size and position are also altered. A mechanism for multilayer adsorption and capillary condensation in modified porous silica is proposed.     

Analysis of organomercury compounds in sediments by capillary GC with atomic fluorescence detection

Analysis of methyl- and ethylmercury (MM and EM) halides in biological and environmental samples is generally performed by gas chromatography with electron capture detection. Tedious sample work-up protocols and poor chromatographic response (using packed columns) have, however, shown the need for the development of new methods in this field. This paper reports a sensitive method, free from these deficiencies, for the determination of methyl- and ethylmercury. The organomercury compounds (MM and EM) are first released from the sample matrix, by the combined action of acidic potassium bromide and cupric ions, and then extracted into dichloromethane. The initial extracts are subjected to thiosulfate clean-up and the organomercury species are isolated as their chloride derivatives by addition of cupric chloride, and subsequent extraction into a small volume of organic solvent. Capillary GC coupled with atomic fluorescence detection provided excellent separation efficiencies for methyl- and ethylmercury and proved to be a very selective and sensitive technique. The absolute detection limit for both MM and EM was found to be 0.2 pg.     

聚甲基丙烯酸甲酯单分子膜的原子力学显微镜研究

报道了利用原子力显微镜（ＡＦＭ）技术对聚甲基丙烯酸甲酯（ＰＭＭＡ）单分子膜进行分子结构水平的观察研究．由ＡＰＭ图像中得到的ＰＭＭＡ单体所占面积与用π－Ａ曲线中换算出液面上ＰＭＭＡＬａｕｇｍｕｉｒ膜中单体的面积符合得很好．从ＡＦＭ图像中可见ＰＭＭＡＬＢ膜中ＰＭＭＡ的线型碳链是与档板（ｂａｒｒｉｅｒ）平行的紧密排列，与ＬＢ提膜方向相垂直．并由此对ＰＭＭＡＬＢ膜的形成过程进行分析．此外，还观察到了在Ｓｉ基底上ＰＭＭＡ直链的卷绕伸直排列形态，初步分析了其形成原因．     

Solid phase extraction of gold by sorption on octadecyl silica membrane disks modified with pentathia-15-crown-5 and determination by AAS

A simple and selective method for rapid and efficient concentration and determination of μg l⁻¹ levels of Au(III) ions in aqueous solution using octadecyl silica membrane disks modified by pentathia-15-crown-5 and flame atomic absorption spectrometry is presented. The influence of flow rates of eluent and sample solution, amount of ligand, types and least amount of eluent for elution of Au from disks were investigated. Break through volume and limit of detection of the membrane disks modified by 5 mg of the thiacrown ether was found to be 2.0 l and 1.0 μg l⁻¹, respectively. The effects of various cationic interferences on percent recovery of gold were studied. The method was successfully applied for the determinations of gold in some pharmaceutical samples and for the recovery of trace Au³⁺ ions from synthetic and water samples.     

An improved microwave plasma torch for atomic spectrometry

The analytical performance of a microwave plasma torch was improved through mechanical alterations. Several problems reported in earlier designs were addressed: the ignition and stabilization of a helium plasma in the MPT was difficult; high powers were required to both ignite and operate the plasma; otherwise, the plasma would erratically change from an annular to a filament type discharge. In the new torch, the helium discharge was stabilized by replacing the copper central tube with one made of quartz. In addition, air entrainment was alleviated through use of a sheathing gas. This modification simplified the background mass spectrum and raised the effective ionization temperature of the discharge. A detailed schematic diagram of the new microwave plasma torch is presented.     

Procedure for dissolving wolframite in order to determine trace elements by atomic absorption spectrometry

An analytical procedure for dissolving wolframite in order to determine trace elements by atomic absorption is reported. After decomposition of the mineral by alkaline fusion, the cooled flux is dissolved by heating with aqua regia. The finely crystalline precipitate of tungstite, which forms on standing, is filtered and dissolved by heating with aqua regia. Tungstite forms again in the latter solution and the filtration and solubilization are repeated until the solution contains negligible amounts of trace elements. Following this procedure, trace elements in 35 samples of natural wolframite have been dissolved and the solutions obtained have been analyzed by atomic absorption spectrometry for Fe, Mn, Cu, Zn, Pb, Co, Ni and Cd.     

A method to construct polyelectrolyte multilayers film containing gold nanoparticles

Gold nanoparticles in polyelectrolyte multilayers film can be easily prepared by repeating immersion of a substrate in poly(diallyl dimethylammonium) chloride (PDDA)-AuCl₄⁻ complexes solution followed by reduction Au³⁺ through heating. UV-vis spectroscopy, cyclic voltammetry (CV) and tapping-mode atomic force microscopy (AFM) are used to confirm the successful construction of the polyelectrolyte multilayers film and the formation of gold nanoparticles. The multilayers film shows electrocatalytic activity to dioxygen reduction.     

酸碱软硬度的电势原子势标度

软硬酸碱原则在化学的各个领域都得到了广泛的应用。在其定量化标度方面也做了不少工作,例如Yingst等的酸度量|α/β|,Klopman的E_n~≠和E_m~≠值,parr和pearson的绝对硬度以及Yatsimirski的ΔA_(FH)等。但是,他们的工作在理论性和应用上都无法统一起来。本文提出一种具有广泛应用性的酸碱软硬度的键参数标度。Mulliken在研究一类弱lewis加合物的光谱时,首先用量子力学原理阐述了lewis