固相膜萃取与GC/MS联用测定地下水中痕量半挥发性有机物的野外采样方法研究

C18固相萃取膜适宜处理大体积地下水样现场采样而且易于运输、贮存。利用C18固相膜萃取以及GC／MS联用的方法对地下水中痕量半挥发性有机污染物进行了萃取以及定性、定量分析。优化了固相膜萃取的地下水采样量和浓缩体积。有机氯农药和多环芳烃的平均回收率分别为85％～110．1％、90．3％～115．1％；方法检出限达到10^-9g／L；相对标准偏差均小于15％。本方法用于北京地区地下水中的有机污染物分析，并给出地下水样C18固相膜萃取的GC／MS测定结果。     

烷基吡啶及氯化铝正负离子结构的密度泛函研究

采用量子化学密度泛函方法对N-烷基吡啶阳离子和阴离子AlCl4-,Al2Cl7-和Al3Cl10-进行了全优化计算,得到了阴阳离子的几何构型和净电荷分布.计算发现,吡啶环上的电子数符合4n 2规则,具有芳香性.吡啶阳离子的LUMO轨道主要由环上原子的2pz所贡献,是反键π分子轨道.AlCl4-,Al2Cl7-和Al3Cl10-的HOMO轨道主要由Cl原子的2px所贡献.推测吡啶阳离子的LUMO与阴离子的HOMO相互作用形成离子液体分子.     

Determination of copper in medicinal plants used as dietary supplements by atomic absorption spectrometry with direct flame solid analysis

An alternative device for the direct solid analysis (DSA) for copper determination by flame atomic absorption spectrometry (FAAS) is proposed. Copper was directly determined in commercial medicinal plants used as dietary supplements. The determination of copper in solid samples by DSA–FAAS was made by using a conventional air–acetylene flame. Between 0.05 and 1.5 mg of each test, sample was weighed directly into a small polyethylene vial connected to the device used for solid introduction into the flame. Test samples were introduced into the flame as a dry aerosol using a T-quartz cell set between the burner and the optical path. The T-quartz cell has a slit in the superior part by which the solid aerosol passes to the flame. A transient signal, evaluated as integrated absorbance, is produced and it is totally integrated in 2 s. Background signals always presented absorbance values less than 0.1. It was found a characteristic mass of 0.8 ng Cu and absolute limit of detection of 1.2 ng (3 s), or 1.2 μg g⁻¹ if a sample mass of 1 mg was used. Optimized conditions for air flow rate, flame stoichiometry, and so on were established as well. No excessive grinding of the samples was needed and samples with particle of size less than 80 μm were used throughout. No statistical difference between the results from the proposed system and those obtained by sample digestion and determination by conventional FAAS was observed. With the proposed procedure, more than 50 test samples can be analyzed in 1 h and it can be easily adapted to conventional spectrometers for FAAS.     

Selective Oxidation of Betulin by Cr(VI) Reagents

Oxidation of betulin by pyridinium dichromate, pyridinium chlorochromate, and K₂Cr₂O₇ -H₂SO₄ in the presence of tetrabutylammonium bromide was studied. Products of regioselective C-3, C-28-, and exhaustive oxidation, 28-hydroxylup-20(29)-3-one, 3-hydroxy- and 3-oxolup-20(29)-en-28-al were obtained.     

A new Fluorimetric Reagent for Highly Selective and Sensitive Determination of Terbium Ion

 In this work, a new ligand, 2,9-bis[N,N-bis(carboxymethyl)-aminomethyl]-1,10-phenanthroline (BBCAP), was synthesized and used to establish a novel fluorimetric method for the determination of trace amounts of terbium in a binary system. Its luminescence mechanism was studied. The excitation and emission wavelengths are 284 nm and 547 nm, respectively. Other rare-earth metal ions in 100-fold excess caused no interference. The fluorescence intensity was a linear function of the concentration of terbium in the range of 5.0 × 10⁻¹⁰–1.0 × 10⁻⁶ mol/L. The detection limit was 2.0 × 10⁻¹¹ mol/L (n = 12). The standard addition method was used to determine the terbium in a synthetic rare-earth sample with satisfactory results. This method represents a direct, rapid, selective and sensitive analytical procedure with a widely linear range. Received November 29, 2001 Revision February 9, 2002     

血清必需元素测定中样品预处理方法的探讨

对血清必需元素测定的样品预处理方法进行了研究，用火焰原子吸收法测定了经不同处理的血清样品中的锌，铜，铁，钙，镁含量，结果显示，预处理方法不同，其测定结果有较大差异，变异系数，镁为７．９４％，锌，铜，铁，钙在１５．１９％～５３．５３％之间，并对各样品作了精密度和准确度实验。     

Frontiers in elemental analysis by mass spectrometry

New developments in inductively coupled plasma mass spectrometry (ICP-MS) and laser desorption-time-of-flight mass spectrometry (LD-TOF-MS) for inorganic analysis are described. These include fundamental studies of the ion extraction, process in ICP-MS, development of a highly efficient nebulizer, isotope tracer studies, measurement of elemental speciation by liquid chromatography with ICP-MS detection and characterization of the structures of solids by ion association. The possibilities of determining inorganic species in solutions by electrospray MS are also described.     

Transferability of some properties of localized molecular orbitals

The transferability of the first and second order electric moments of localized orbitals have been shown. Some moment characteristics have also been investigated. The standard deviation of first order localized moments is less than 2.0%. The standard deviation of second order electric moment components are larger: although they do not exceed 4.0% for bond orbitals, for lone pair ones they vary about 1.5–10.1%.     

Preparation of apolar glass capillary columns by the barium carbonate procedure

As an extension of previous reports, the barium carbonate procedure has been optimized in detail for the preparation of apolar columns. The aim was to produce optimum overall column characteristics, and to maintain them unchanged under the prolonged influence of the highest possible temperature. The main parameters under optimization were glass variety, leaching of glass surface with aqueous HCl, and amount of barium carbonate deposited, while deactivation and coating were kept constant. The basic column characteristics were adsorption properties and thermostability of deactivation, acid/base behaviour and separation efficiency. They were determined by a new, quantitative testing procedure. Intense leaching was able to eliminate almost totally the differences between glass varieties and to create a well-defined glass surface. While untreated glass, leached glass, and barium carbonate treated glass showed specific weak points in the respective column quality, the combination of leaching and barium carbonate treatment yielded the highest and most stable quality. Some technical modifications of the preparation procedure are described, including deactivation in the gas phase, and use of pentane as a solvent for static coating.     

Stability study and quantitative determination of mebeverine hydrochloride in tablets by means of reversed-phase high-performance liquid chromatography

Summary A rapid and specific reversed-phase high-performance liquid chromatographic method (RPHPLC) is described for the determination of mebeverine hydrochloride in tablets. Elution was performed on an octyl silane column with a methanol-water mixture (75-25), containing 0.05% hexylamine as silanol-blocking agent, adjusted to pH 5.0 with phosphoric acid. The method gave accurate, precise and reproducible results. The mean recovery of the drug from six synthetic tablet mixtures was 100.0% with a relative standard deviation (RSD) of 0.94%. In order to test the specificity of the method, the interference of the degradation compounds of mebeverine hydrochloride and of the intermediates from the synthesis was investigated. None of them did interfere. By means of mass spectrometry and UV-spectrophotometry, the degradation compounds of mebeverine were identified as veratric acid and as 4-|ethyl-[2-(4-methoxyphenyl)-1-methylethyl]amino| 1-butanol. The stability study proved that mebeverine hydrochloride is very stable in tablets; the tablets still contain more than 95% of the declared drug potency after storage for more than one year at 50°C.Colofac; Duspatal; Duspatalin