Influences of Sr2+ Doping on Microstructure,Giant Dielectric Behavior,and Non-Ohmic Properties of CaCu3Ti4O12/CaTiO3 Ceramic Composites

The microstructure, dielectric response, and nonlinear current-voltage properties of Sr²⁺-doped CaCu₃Ti₄O₁₂/CaTiO₃ (CCTO/CTO) ceramic composites, which were prepared by a solid-state reaction method using a single step from the starting nominal composition of CCTO/CTO/xSrO, were investigated. The CCTO and CTO phases were detected in the X-ray diffraction patterns. The lattice parameter increased with increasing Sr²⁺ doping concentration. The phase compositions of CCTO and CTO were confirmed by energy-dispersive X-ray spectroscopy with elemental mapping in the sintered ceramics. It can be confirmed that most of the Sr²⁺ ions substituted into the CTO phase, while some minor portion substituted into the CCTO phase. Furthermore, small segregation of Cu-rich was observed along the grain boundaries. The dielectric permittivity of the CCTO/CTO composite slightly decreased by doping with Sr²⁺, while the loss tangent was greatly reduced. Furthermore, the dielectric properties in a high-temperature range of the Sr²⁺-doped CCTO/CTO ceramic composites can be improved. Interestingly, the nonlinear electrical properties of the Sr²⁺-doped CCTO/CTO ceramic composites were significantly enhanced. The improved dielectric and nonlinear electrical properties of the Sr²⁺-doped CCTO/CTO ceramic composites were explained by the enhancement of the electrical properties of the internal interfaces.     

Synthesis of Ozone at Atmospheric Pressure by a Quenched Induction-Coupled Plasma Torch

The technical feasibility of using an induction-coupled plasma (ICP) torch to synthesize ozone at atmospheric pressure is explored. Ozone concentrations up to ~250 ppm were achieved using a thermal plasma reactor system based on an ICP torch operating at 2.5 MHz and ~11 kVA with an argon/oxygen mixture as the plasma-forming gas. The corresponding production rate and yield were ~20 g ozone/hr and ~2g ozone/kWh, respectively. A gaseous oxygen quench formed ozone by rapid mixing of molecular oxygen with atomic oxygen produced by the torch. The ozone concentration in the reaction chamber was measured by Fourier Transform infrared (FTIR) spectroscopy over a wide range of experimental conditions and configurations. The geometry of the quench gas flow, the quench flow velocity, and the quench flow rate played important roles in determining the ozone concentration. The ozone concentration was sensitive to the torch RF power, but was insensitive to the torch gas flow rates. These observations are interpreted within the framework of a simple model of ozone synthesis.     

Surface analysis of high performance carbon/bismaleimide composites exposed to electron irradiation

The aim of this article was to investigate the effects of electron irradiation in ultrahigh vacuum environment on the surface properties of high‐performance carbon/bismaleimide (BMI) composites used in aerospace. The changes in surface chemical composition with increasing irradiation fluence were studied by XPS. The evolution of surface morphology and surface roughness were observed by atomic force microscopy (AFM). The mass loss behavior occurring in the surface layer of the composites was examined. The results indicated that the electron irradiation in high vacuum caused rupture of chemical bonds and cross‐linking process in the surface layer, thereby leading to the mass loss behavior and the formation of carbonification layer in the surface of the carbon/BMI composites. The changes in the surface chemical composition were determined by a competing effect existing between the rupture of chemical bonds and the cross‐linking process at lower irradiation fluence, and by a degradation process only at higher fluence of electron irradiation. The surface morphology was altered and the surface roughness was increased significantly after electron irradiation. The mass loss ratio first increased obviously at lower fluences, and then reached a plateau value of 0.45% beyond 5 × 10¹⁵ cm^?2 fluence of electron irradiation. Copyright © 2011 John Wiley & Sons, Ltd.     

Construction of database of effective energy‐loss functions

Effective energy‐loss functions for Al, Cu, Ag and Au were derived from the reflection electron energy‐loss spectroscopy (REELS) spectra for 1 keV electrons using extended Landau theory. Features of the obtained effective energy‐loss functions are close to those of optical surface energy‐loss functions, revealing the significant contribution of the low energy loss below a few tens of electron‐volts in the REELS spectrum for Cu, Ag and Au. The REELS spectra were reproduced using the newly derived effective energy‐loss functions, leading to the confirmation that this type of database of the effective energy‐loss function is very useful not only for more comprehensive understanding of the measured spectrum of surface electron spectroscopies but also for practical background subtraction in surface electron spectroscopy. Copyright © 2003 John Wiley & Sons, Ltd.     

Real‐time lock‐in energy loss imaging with a novel high‐speed image processing CCD video camera

We have developed a high‐speed image processing CCD video camera for real‐time energy‐loss imaging using a conventional electron microscope with an energy‐loss imaging facility. As an initial demonstration of real‐time lock‐in energy‐loss imaging, a background‐subtracted energy‐loss image was observed by attaching the high‐speed image processing CCD video camera to an analytical electron microscope equipped with a floating‐type energy‐loss imaging analyser. Copyright © 2003 John Wiley & Sons, Ltd.     

大气降尘中有机物的提取分离及其气相色谱-质谱分析

采用索氏萃取法提取大气降尘中的有机物,用自制的硅胶层析柱进行了分离纯化,并以气相色谱/质谱法对提取物进行了分析.结果表明:从临沂师范学院前十学生公寓和临沂市汽车总站采集到的大气降尘样品中都含有较多的烷类、醛酮类、苯类和酯类有机化合物,并检测到一定量的卤代烃、酞酸酯类、多环芳烃类等有害于健康的物质.经初步推测,大气降尘中的有机化合物与机动车尾气排放有很大关系.文中对大气降尘中有机化合物的分析将为进一步研究大气降尘中有害物质的来源、迁移及其转化规律提供参考.     

Polyimide/polyoxometalate copolymer thin films: synthesis,thermal and dielectric properties

A mono‐lancunary keggin‐type decatungstosilicate (SiW₁₁) polyoxometalate (POM) modified by γ‐aminopropyltriethoxysilane (KH550) was incorporated into polyimide (PI) through copolymerization. Nuclear magnetic resonance (NMR), fourier transition infrared spectroscopy (FTIR), and wide angle X‐ray diffraction (WAXD) were used to characterize the structure and composition of the polyoxometalate–organosilane hybrid (SiW₁₁KH550) and PI/SiW₁₁KH550 copolymers. The differential scanning calorimetry (DSC) studies indicate that the glass transition temperature (T_g) of PI/SiW₁₁KH550 copolymers increases from 330°C (for neat PI) to 409°C (for the copolymer sample with 10 wt% of SiW₁₁KH550). Dielectric measurement showed that both the dielectric constant and the dielectric loss for the copolymer thin films decreased with the increase in SiW₁₁KH550 content, and the dielectric constant and dielectric loss values decreased to 2.1 and 3.54 × 10^?3, respectively, for the copolymer sample with 10 wt% of SiW₁₁KH550. The incorporation of SiW₁₁KH550 into polymer matrices is a promising approach to prepare PI films with a low dielectric constant and low dielectric loss. Copyright © 2009 John Wiley & Sons, Ltd.     

Experimental study on equilibrium deviations in atmospheric pressure argon/helium surface wave discharges

Atmospheric pressure surface wave discharges generated with Ar–He mixtures with He concentrations up to 99% were studied using spectroscopic techniques. The variation of electron density and linear power density with He concentration and along the plasma column is discussed together with the excitation temperatures derived from the Boltzmann plot of the excited states of Ar I and the values of the b(p) parameters to derive the thermodynamic equilibrium state of the discharge. Important deviations with respect to Local Thermodynamic Equilibrium were observed for He concentrations over 50% as the discharge shifts from a recombining to an ionizing behaviour. Furthermore, the discharge kinetic variations behind these changes are discussed.     

The gas phase oxidation of HCOOH by Cl and NH2 radicals. Proton coupled electron transfer versus hydrogen atom transfer*

ABSTRACT

The reaction of formic acid (HCOOH) with chlorine atom and amidogen radical (NH₂) have been investigated using high level theoretical methods such BH&HLYP, MP2, QCISD, and CCSD(T) with the 6–311?+?G(2df,2p), aug-cc-pVTZ, aug-cc-pVQZ and extrapolation to CBS basis sets. The abstraction of the acidic and formyl hydrogen atoms of the acid by the two radicals has been considered, and the different reactions proceed either by a proton coupled electron transfer (pcet) and hydrogen atom transfer (hat) mechanisms. Our calculated rate constant at 298?K for the reaction with Cl is 1.14?×?10^?13?cm³?molecule^?1?s^?1 in good agreement with the experimental value 1.8?±?0.12/2.0?×?10^?13?cm³?molecule^?1?s^?1 and the reaction proceeds exclusively by abstraction of the formyl hydrogen atom, via hat mechanism, producing HOCO+ClH. The calculated rate constant, at 298?K, for the reaction with NH₂ is 1.71?×?10^?15?cm³?molecule^?1?s^?1, and the reaction goes through the abstraction of the acidic hydrogen atom, via a pcet mechanism, leading to the formation of HCOO+NH₃.     

The (S−1,S) inventory model and its counterparts in queueing theory

We explore the relationship between the ($S?1,S$) inventory model and three well-known queueing models: the Erlang loss system, the machine-repair model and a two-node Jackson network. Exploiting this relationship allows us to obtain key performance measures of the ($S?1,S$) model, like the so-called virtual outdating time, the number of items on the shelf in steady state, the long-run rate of unsatisfied demands and the distribution of the empty shelf period.