迫流冷却二极NbTi超导磁体的研究

首先介绍了导体的测试结果;其次,为评估迫流冷却的二极NbTi超导磁体正常工况下对液氦产生的低温热负荷,基于surf152表面效应单元对线圈盒进行了辐射传热分析;此外,为减小通过线圈盒支撑的传导热负荷并且提高其机械强度,依据线圈盒支撑杆的设计尺寸,提出使用玻璃纤维经过三维编织的各向异性复合材料-G10制作线圈盒支撑杆,从...     

Modelling of multi-bodies in close proximity under water waves——Fluid resonance in narrow gaps

Viscous fluid model and potential flow model with and without artificial damping force(f=-μV,μ the damping coefficient and V the local averaging flow velocity) are employed in this work to investigate the phenomenon of fluid resonance in narrow gaps between multi-bodies in close proximity under water waves.The numerical results are compared with experimental data available in the literature.The comparison demonstrates that both the viscous fluid model and the potential flow model are able to predict the res...     

Solution to the MHD flow over a non-linear stretching sheet by homotopy perturbation method

In this study,by means of homotopy perturbation method(HPM) an approximate solution of the magnetohydrodynamic(MHD) boundary layer flow is obtained.The main feature of the HPM is that it deforms a difficult problem into a set of problems which are easier to solve.HPM produces analytical expressions for the solution to nonlinear differential equations.The obtained analytic solution is in the form of an infinite power series.In this work,the analytical solution obtained by using only two terms from HPM soluti...     

Vibration control of the finite L-shaped beam structures based on the active and reactive power flow

This paper analyzes the physical meaning of the active and reactive power flow in the finite L-shaped beams and studies the active vibration control of the structures based on the active and reactive power flow.The traveling wave approach is used to calculate the structural dynamic responses.Because the error of control force is inevitable in practical applications,the effects of the error of control force on the control results are studied.The study indicates that the error of control force has pronounced ...     

Evaluating practical measurements of fire-induced vent flows with stereoscopic PIV

Stereoscopic particle image velocimetry (SPIV) was applied to a fire-induced doorway flow to provide the velocity field for computations of the mass flow rate of air into an enclosure. For a flow of uniform temperature and concentration, the technique met all of the requirements to provide the best estimate of the mass flow rate. Simultaneous measurements of vertical distributions of velocity and temperature were also conducted with conventional vent flow techniques, bi-directional probes and thermocouples. Correction factors for mass flow rate computations using the conventional techniques were determined based on comparisons to the SPIV results. An average correction factor of unity was determined for the bi-directional probe technique thus further confirming the utilization of velocity distributions acquired using the technique in mass flow rate computations. An average correction factor of 0.69 was determined for mass flow rates computed from vertical temperature distributions inside and outside the enclosure. This agrees with average correction factors determined in previous studies. The results from the present study suggest that the conventional techniques, which are practical and affordable for routine fire testing, may be applied with greater confidence for fires up to 500 kW.     

The time-dependent Ginzburg-Landau equation for the two-velocity difference model

A thermodynamic theory is formulated to describe the phase transition and critical phenomenon in traffic flow.Based on the two-velocity difference model,the time-dependent Ginzburg-Landau (TDGL) equation under certain condition is derived to describe the traffic flow near the critical point through the nonlinear analytical method.The corresponding two solutions,the uniform and the kink solutions,are given.The coexisting curve,spinodal line and critical point are obtained by the first and second derivatives of the thermodynamic potential.The modified Korteweg de Vries (mKdV) equation around the critical point is derived by using the reductive perturbation method and its kink-antikink solution is also obtained.The relation between the TDGL equation and the mKdV equation is shown.The simulation result is consistent with the nonlinear analytical result.     

混合交通流时间序列的去趋势波动分析

应用去趋势波动分析法研究交通流时间序列的复杂性,探讨了混合交通流时间序列演变行为的标度指数.根据标度指数的变化特征,进而揭示交通流时间序列所具有的长程相关性和短程相关性.通过分析发现,存在一密度ρ,当ρ₁<ρ<ρ₂时,交通流时间序列具有长程相关性;而当ρ<ρ₁或ρ>ρ₂时,交通流时间序列具有短程相关性,即密度的变化影响着标度指数的变化.另外分析了在不同慢车比率条件下时间序列的标度指数,发现慢车比率的变化 关键词： 混合交通流 去趋势波动分析 时间序列 长程相关     

考虑意外事件对交通流影响的元胞自动机交通流模型

在NaSh模型的基础上,考虑交通事故和养护路段等意外事件对高速公路交通流的影响,建立了有意外事件影响的在车道管制下的高速公路交通流元胞自动机模型,并进行数值模拟. 研究发现:意外事件对高速公路交通流有明显影响,并且意外事件对交通流的影响在某一密度值范围内尤其明显,且意外事件堵塞点在第一车道比在第二车道对交通流的影响小;同时,在该密度值范围内,意外事件堵塞时间和堵塞路段长度越长,对交通流的影响就越大. 关键词： 元胞自动机 交通流 意外事件     

Digital flow control of electroosmotic pump: Onsager coefficients and interfacial parameters determination

Electroosmosis and streaming potential are two complementary electrokinetic processes related by the Onsager relation. In particular, an electroosmotic pump (EOP) is potentially useful for a variety of engineering and bio-related applications. By fabricating samples consisting of dry-etched cylindrical pores (50 μm in length and 3.5 μm in diameter) on silicon wafers, we demonstrate that the use of digital control via voltage pulses can resolve the flow regulation and stability issues associated with the EOP, so that the intrinsic characteristics of the porous sample medium may be revealed. Through the consistency of the measured electroosmosis (EO) and the streaming potential (SP) coefficients as required by the Onsager relation, we deduce the zeta potential and the surface conductivity, both physical parameters pertaining to the liquid-solid interface.     

Modification of surface properties of polyamide 6 films with atmospheric pressure plasma

To investigate the effect of the different plasma gases treatment on the surface modification of atmospheric pressure plasma, polyamide 6 films were treated using pure helium (He), He/O₂ and He/CF₄, respectively. Atomic force microscopy (AFM) showed rougher surface, while X-ray photoelectron spectroscopy (XPS) revealed increased oxygen and fluorine contents after the plasma treatments. The plasma treated samples had lower water contact angles and higher T-peel strength than that of the control. The addition of small amount of O₂ or CF₄ to He plasma increases the effectiveness of the plasma treatment in polymer surface modification in terms of surface roughness, surface hydrophilic groups, etching rate, water contact angle and bonding strength.