Surface modification of polypropylene with an atmospheric pressure plasma jet sustained in argon and an argon/water vapour mixture

In this paper, an atmospheric pressure plasma jet sustained in pure argon and an argon/water vapour mixture has been used to modify the surface of polypropylene (PP) films. The gas temperature of the plasma jet was found to be 625 K in an active zone between the electrodes and was found to increase in the afterglow. Based on these results, the PP films are placed as close as possible to the edge of the capillary in order to avoid thermal damage to the polymer. XPS results on the untreated and modified PP samples revealed incorporation of a significant amount of oxygen on the polymer surface, however, this oxygen inclusion is more pronounced for the argon/water vapour jet due to the higher radicals density in the jet afterglow. One can therefore conclude that adding water vapour to an argon plasma jet can be a convenient way to increase the efficiency of plasma surface modification.     

静电场对静止液体压强的影响

论述了由于静电场的存在,在大气压力场中,静止液体内任意两点间的压强差与重力和静电场力的关系.     

Gas collection efficiency of annular denuders: A spreadsheet-based calculator

Denuders are widely used for atmospheric analysis. Annular denuders are especially well-suited for preconcentration of trace gases compared to simpler single tube designs. While traditionally coated annular denuders have both bounding surfaces that behave as sinks, annular denuders/membrane-based scrubbers with the same basic geometric design and with only one of the annular surfaces functioning as sink (e.g., a membrane tube whose outer surface behaves as a sink disposed within an inert jacket tube) have become common. However, the gas collection efficiency of such devices cannot be expressed as a simple equation with fixed constants and there is no presently available tool to a priori determine the denuder performance or to design denuders with specific removal efficiencies at specific sampling rates. This paper presents a simple to use “spreadsheet calculator” for concentric annular denuders of any dimension based on known solutions to analogous heat transfer problems. The results from the present spreadsheet calculator are compared with results from a commercial computational fluid dynamics package (Fluent™; this takes significant expertise and development effort to run)—the two approaches produce essentially the same results. The present spreadsheet calculator can be used easily and simply without training and will be a useful tool for denuder users and designers.     

钒(Ⅴ)-7-碘-8-羟基喹啉-5-磺酸显色体系测定钢样中的钒

研究了7-碘-8-羟基喹啉-5-磺酸（H2QSI）在乙醇存在下分光光度法测定钡（Ⅴ）的最佳条件。在乙醇存在下pH4的硫酸介质中,（H2QSI）与V（Ⅴ）形成了红棕色配合物,最大吸收位于506nm处,表观摩尔吸光系数εmax＝2.9×103L·mol-1·cm-1,有色配合物组成为V（Ⅴ）:（H2QSI）＝1:3。钒（Ⅴ）在0-14μg／25mL符合比耳定律、本法用于钢样中的测定,结果满意。H2QSI是光度分析中的一种显色剂,近年来,8-羟基喹啉类试剂用于钒（Ⅴ）的测定已有报道[1]:,H2QSI曾见用于稀土元素的光度测定[2],但用于钒（Ⅴ）的测定尚未见报道。本文研究了V（Ⅴ）与H2QSI的显色反应条件及组成,在pH4的乙醇介质中,V（Ⅴ）与H2QSI生成红棕色配合物ε506nm＝2.9×103L·mol-1·cm-1。本方法用于低碳合金钢中钒的测定,结果满意。     

催化分光光度法中的二标样计算法

本方导出了一种催化分光光度法计算公式，即二标样计算法，并进行了实验验证，结果良好。     

Adaptive detection technique for optical wireless communication over strong turbulence channels

Optical wireless communication (OWC) systems use the atmosphere as a propagation medium, so the atmospheric turbulence effects lead to fading related with signal intensity. The received signal of OWC over strong turbulence channels is assumed to be a mixture of K-distributed fading and Gaussian distributed thermal noise. Second-order spectral analysis is unable to separately estimate the mixed signal. In order to mitigate the fading induced by turbulence, the decision threshold-updating algorithm based on second and higher order cumulants is proposed and is able to operate in an unknown turbulence environment. The performance of the adaptive processing scheme has been evaluated by means of Monte Carlo simulations. Simulation results show the improvement of the bit error rate (BER) performance.     

Method development for the determination of 24S‐hydroxycholesterol in human plasma without derivatization by high‐performance liquid chromatography with tandem mass spectrometry in atmospheric pressure chemical ionization mode

We developed a highly sensitive and specific high‐performance liquid chromatography with tandem mass spectrometry method with an atmospheric pressure chemical ionization interface to determine 24S‐hydroxycholesterol, a major metabolite of cholesterol formed by cytochrome P450 family 46A1, in human plasma without any derivatization step. Phosphate buffered saline including 1% Tween 80 was used as the surrogate matrix for preparation of calibration curves and quality control samples. The saponification process to convert esterified 24S‐hydroxycholesterol to free sterols was optimized, followed by liquid–liquid extraction using hexane. Chromatographic separation of 24S‐hydroxycholesterol from other isobaric endogenous oxysterols was successfully achieved with gradient mobile phase comprised of 0.1% propionic acid and acetonitrile using L‐column2 ODS (2 μm, 2.1 mm id × 150 mm). This assay was capable of determining 24S‐hydroxycholesterol in human plasma (200 μL) ranging from 1 to 100 ng/mL with acceptable intra‐ and inter‐day precision and accuracy. The potential risk of in vitro formation of 24S‐hydroxycholesterol by oxidation from endogenous cholesterol in human plasma was found to be negligible. The stability of 24S‐hydroxycholesterol in relevant solvents and human plasma was confirmed. This method was successfully applied to quantify the plasma concentrations of 24S‐hydroxycholesterol in male and female volunteers.     

Analytical capabilities of high performance liquid chromatography – Atmospheric pressure photoionization – Orbitrap mass spectrometry (HPLC-APPI-Orbitrap-MS) for the trace determination of novel and emerging flame retardants in fish

A new analytical method was established and validated for the analysis of 27 brominated flame retardants (BFRs), including so called “emerging” and “novel” BFRs (EBFRs and NBFRs) in fish samples. High performance liquid chromatography (HPLC) coupled to Orbitrap mass spectrometry (Orbitrap-MS) employing atmospheric pressure photoionization (APPI) interface operated in negative mode was used for the identification/quantitation of contaminants. HPLC-Orbitrap-MS analysis provided a fast separation of selected analytes within 14 min, thus demonstrating a high throughput processing of samples. The developed methodology was tested by intralaboratory validation in terms of recovery, repeatability, linear calibration ranges, instrumental and method limits of quantitation (i-LOQ and m-LOQ), and where possible, trueness was verified by analysis of certified reference materials (CRMs). Recoveries of analytes were between 80 and 119%, while the repeatability in terms of relative standard deviations (RSDs) was in the range from 1.2 to 15.5%. The measured values for both analyzed CRMs agreed with the provided consensus values, revealing the recovery of reference concentrations in 72–119% range. The elaborated method met the sensitivity criterion according to Commission Recommendation 2014/118/EU on monitoring of BFRs in food products for majority of the compounds. The concentrations of polybrominated diphenyl ethers (PBDEs) in real samples determined by HPLC-APPI-Orbitrap-MS method and validated gas chromatography–high-resolution mass spectrometry (GC–HRMS) method were found to be in a good agreement.     

Structure of tropical variability from a vertical mode perspective

A composite mesoscale precipitation event and a convectively coupled Kelvin wave produced by a diabatically accelerated cloud resolving model are compared. Special emphasis is placed on the vertical structure of density and moisture perturbations and the interaction of these perturbations with the composited dynamical fields. Both composites share the same general features, a gradual deepening and strengthening of convection followed by deep convection and a stratiform region, quite similar in character to observations and some recent idealized models. Composited frozen moist static energy (FMSE) perturbations are several times larger than virtual temperature perturbations, suggesting moisture is a dominant regulator of convection. An empirically derived two vertical mode decomposition of the dynamical and moisture fields is found to reproduce both composites quite well. The leading vertical modes of FMSE and virtual temperature variability are strongly correlated with the modes of vertical velocity variability; these correlations are strongest at near-zero time lags. Deep convection is associated with moistening in the lower and middle troposphere, while shallow convection is associated with a moist lower troposphere and dry middle and upper troposphere. To the extent that our numerical model is realistic, the empirical modal decomposition provides support for the use of two-mode idealized models for convective interaction with large-scale circulations and guidance for formulating feedbacks between convection and the thermodynamic profile in such models. The FMSE budget leads to an interpretation of the convective life-cycle as a recharge–discharge mechanism in column-integrated FMSE. The budget analysis places diabatic forcing, surface and radiative fluxes into the moist energetic framework. In particular, these fluxes are seen to prolong active convection, but play a passive role in its initiation. The modally decomposed FMSE budget highlights the dynamical importance of the second baroclinic mode in moistening the lower and middle troposphere before convective onset (recharging), and then discharging stored FMSE in the stratiform region.     

Direct on-strip analysis of size- and time-resolved aerosol impactor samples using laser induced fluorescence spectra excited at 263 and 351 nm

We report a novel atmospheric aerosol characterization technique, in which dual wavelength UV laser induced fluorescence (LIF) spectrometry marries an eight-stage rotating drum impactor (RDI), namely UV-LIF-RDI, to achieve size- and time-resolved analysis of aerosol particles on-strip. The UV-LIF-RDI technique measured LIF spectra via direct laser beam illumination onto the particles that were impacted on a RDI strip with a spatial resolution of 1.2 mm, equivalent to an averaged time resolution in the aerosol sampling of 3.6 h. Excited by a 263 nm or 351 nm laser, more than 2000 LIF spectra within a 3-week aerosol collection time period were obtained from the eight individual RDI strips that collected particles in eight different sizes ranging from 0.09 to 10 μm in Djibouti. Based on the known fluorescence database from atmospheric aerosols in the US, the LIF spectra obtained from the Djibouti aerosol samples were found to be dominated by fluorescence clusters 2, 5, and 8 (peaked at 330, 370, and 475 nm) when excited at 263 nm and by fluorescence clusters 1, 2, 5, and 6 (peaked at 390 and 460 nm) when excited at 351 nm. Size- and time-dependent variations of the fluorescence spectra revealed some size and time evolution behavior of organic and biological aerosols from the atmosphere in Djibouti. Moreover, this analytical technique could locate the possible sources and chemical compositions contributing to these fluorescence clusters. Advantages, limitations, and future developments of this new aerosol analysis technique are also discussed.