The lifetime of CFC substitutes studied by a network trained with chaotic mapping modified genetic algorithm and DFT calculations

The hydrohaloalkanes have attracted much attention as potential substitutes of chlorofluorocarbons (CFCs) that deplete the ozone layer and lead to great high global warming. Having a short atmospheric lifetime is very important for the potential substitutes that may also induce ozone depletion and yield high global warming gases to be put in use. Quantitative structure–activity relationship (QSAR) studies were presented for their lifetimes aided by the quantum chemistry parameters including net charges, Mulliken overlaps, E _HOMO and E _LUMO based on the density functional theory (DFT) at B3PW91 level, and the C-H bond dissociation energy based on AM1 calculations. Outstanding features of the logistic mapping, a simple chaotic system, especially the inherent ability to search the space of interest exhaustively have been utilized. The chaotic mapping aided genetic algorithm artificial neural network training scheme (CGANN) showed better performance than the conventional genetic algorithm ANN training when the structure of the data set was not favorable. The lifetimes of HFCs and HCs appeared to be greatly dependent on their energies of the highest occupied molecular orbitals. The perference of the RMSRE comparing to RMSE as objective function of ANN training was better for the samples of interest with relatively short lifetimes. C₂H₆ and C₃H₈ as potential green substitutes of CFCs present relatively short lifetimes.     

Application of the Combustion Method in a Closed Flask to the Lead Determination in Atmospheric Aerosols

Abstract

The destruction of the filter for metal determination in atmospheric aerosols is an important step in the analysis. Nowadays the decomposition of this kind of sample has not been completely solved, so it is interesting to study new methods for filter sample attack. In the present work the application of the combustion method in a closed flask for mixed cellulose esters filter decomposition for lead determination is proposed. For this purpose optimum operating conditions as stopper flask design, sample size, flask volume, shaking time and volume and concentration of absorbing solution are established, and accuracy and precision of the proposed method using AAS for the measurements is given. The results obtained by the closed flask combustion are compared with those found by wet attack with HNO₃. The method proposed is rapid, has low reagent contamination and no loss of lead by volatilization or by amalgamation occurs. This method shows an accuracy and a precision in good agreement with the standard method.     

Ammonium Determination in Water Samples by Using Opa-Nac Reagent: A Comparative Study with Nessler and Ammonium Selective Electrode Methods

A selective and sensitive method based on the ammonium derivatisation with o -phthaldialdehyde (OPA) and N -acetyl-cysteine (NAC) has been developed for ammonium determination in real water samples. The proposed procedure has been compared with ammonium reference methods such as Nessler reagent method and ammonium selective electrode. All procedures have been chemometrically tested and compared in terms of the main analytical properties. These procedures have been used to determine ammonium in unknown water samples. The OPA-NAC reagent method does not present any systematic error (proportional or constant), while Nessler reagent presents both of them for some samples assayed. The ammonium selective electrode is free of corrigible systematic errors, however presents amine interference. The OPA-NAC ammonium method is able to achieve a detection limit (LOD) of 0.07 mg/L in the sample, with a linear dynamic range up to 1.4 mg/L of ammonium.     

Fitting formula for the injection volume of a gas chromatograph for radio‐xenon sampling in the lower troposphere

GC is usually used for xenon concentration and radon removal in the International Monitoring System of the Comprehensive Nuclear‐Test‐Ban Treaty. In a gas chromatograph, the injection volume is defined to calculate the column capacity. In this paper, the injection volume was investigated and a fitting formula for the injection volume was derived and discussed subsequently. As a consequence, the xenon injection volume exponentially decreased with the column temperature increased, but exponentially increased as the flow rate increased.     

Glow Discharge Characteristics of Hollow Needle-Plate Electrode in Atmospheric Pressure ArgonSCIEI北大核心CSCD

Atmosphere pressure uniform plasma has the broad application prospect in the industrial field. Using hollow needle cathode - plate anode device excited by direct-current voltage, a uniform and stable glow discharge is generated at atmospheric pressure in ambient air with argon used as working gas. The influence of the experimental parameters (including gas flow rate and the gas gap width) on discharge has been investigated by optical method. It can be found that a glow-discharge plasma column can bridge the two electrodes. The plasma column is uniform, and no filaments can be discerned. Near the plate electrode, the diameter of the plasma column is largest of all positions. The maximal diameter of the plasma column increases with increasing the discharge current or the gas flow rate. Through electrical method, the voltage-current characteristic has been investigated. It has been found that the discharge voltage decreases with increasing the current which is similar with the characteristic of glow discharge in low pressure. It increases with increasing the gas gap width or the gas flow rate. By analyzing the optical emission spectrum scanning from 330 to 450 nm emitted from the direct-current glow discharge, the molecular vibrational temperature and the intensity ratio of spectral lines I-391.4/I-337.1 have been investigated as functions of the gas flow rate and gas gap width. Results indicate that both the vibrational temperature and the intensity ratio of spectral lines I-391.4/I-337.1 decrease with increasing the gas flow rate or the gas gap width. In addition, the molecular vibrational temperature and the intensity ratio of spectral lines I-391.4/I-337.1 have been investigated in spatial resolution along the direction of gas flow(plasma column axial), and give a qualitative analysis as well. It is found that the vibrational temperature and the average electron energy increase with increasing the distance from the hollow needle cathode. These results are important to the industrial applications of glow discharge.     

用瑞利激光雷达16年观测数据分析合肥地区大气密度分布特征

介绍了L625瑞利激光雷达系统结构以及基于瑞利散射理论探测大气分子数密度的原理.提出了反复迭代修正大气透过率的计算方法,并通过模拟仿真验证了该算法的可靠性.通过误差分析得到影响大气分子密度不确定度的主要因素为回波信号信噪比以及参考点处大气分子数密度值,给出了回波信号误差产生的主要来源以及参考点选取方法.最后,分析了激光雷达16年观测数据反演的结果,得到合肥地区大气分子数密度的月份以及年份分布状况,结果表明:中层大气分子数密度分布呈现明显的季节性分布特征,冬季分布稀疏,夏季分布密集,随年份分布则较为平稳.通过将统计平均得到的密度廓线与1976美国标准大气模式比对分析,发现由激光雷达观测反演得到的结果较模式值大,二者的比值在1.05～1.13之间.     

Atmospheric pressure plasma treatment on graphene grown by chemical vapor deposition

We demonstrate the surface treatment of graphene using an atmospheric pressure plasma jet (APPJ) system. The graphene was synthesized by a thermal chemical vapor deposition with methane gas. A Mo foil and a SiO₂ wafer covered by Ni films were employed to synthesize monolayer and mixed-layered graphene, respectively. The home-built APPJ system was ignited using nitrogen gas to functionalize the graphene surface, and we studied the effect of different treatment times and interdistance between the plasma jet and the graphene surface. After the APPJ treatment, the hydrophobic character of graphene surface changed to hydrophilic. We found that the change is due to the formation of functionalities such as hydroxyl and carboxyl groups. Furthermore, it is worth noting that the nitrogen plasma treatment induced charge doping on graphene, and the pyridinic nitrogen component in the X-ray photoelectron spectroscopy spectrum was significantly enhanced. We conclude that the atmospheric pressure plasma treatment enables controlling the graphene properties without introducing surface defects.     

基于高阶累计量的大气光通信自适应信号处理

针对强湍流信道下信号衰落的特点,分析了对数正态分布模型与K分布模型的适用范围.基于K分布模型建立大气光通信接收信号模型,并给出了自适应最优门限检测方法.采用四阶和六阶累计量对强湍流信道参量进行估计,采用二阶累计量对其它高斯噪音进行估计,得到K分布参量及高斯噪音统计量的预测值,实现自适应门限更新.基于Monte Calro算法进行仿真,给出了门限更新算法对通信系统误码率的影响,同时分析了信号采样率对估计参量偏差的影响.计算表明,在强湍流情况下,大气光通信系统的误码率性能得到极大的改善,优于基于MLSD检测的接收机.     

基于NICE-OHMS技术进行大气压气样直接检测的理论分析

噪声免疫腔增强光外差分子光谱技术(NICE-OHMS)是目前世界上最灵敏的激光吸收光谱技术,其在低压环境中具有极高的探测灵敏度。然而当测量样品处于大气压时,NICE-OHMS系统的探测灵敏度会大幅下降。主要原因之一是大气压下获取最大NICE-OHMS信号幅度的条件与低气压下不同。通过对大气压NICE-OHMS理论进行分析,分析了影响信号幅度的参数,并通过数值模拟来寻找最佳的实验条件。本文着重讨论影响信号的主要参数包括光学腔腔长L,调制系数β,探测相位θ。其中,由于在NICE-OHMS中使用DeVoe-Brewer技术将调制频率ν_m锁定到Fabry-Parot(FP)腔的自由光谱区(FSR)。因此FP腔的腔长决定了ν_m,同时还作用于信号幅度S■。模拟结果显示,当腔长增大时,由于ν_m随之减小,载波和边带的光谱成分相互重叠部分增大,因此线型函数的幅度逐渐减小。而吸收信号幅度随着腔长的增加而逐渐增加,色散信号幅度先增大后减小,并且在腔长等于8 cm时达到最大值。调制系数β会影响频率调制后激光载波和边带的幅度大小,并且影响信号线型。随着腔长的增加,最大信号幅度对应的β值也随之增加。在相同腔长下,色散信号的最佳β值小于吸收信号,更容易使用电光调制器实现。最后分析了参数的可实现性,分析了不同种类激光器的频率调谐能力,压电陶瓷的扫描宽度等。以乙炔气体为例,大气压下NICE-OHMS的谱线半宽达到~3 GHz,而光谱覆盖范围大于10 GHz。分布反馈式半导体激光器(DFB)与外腔二极管激光器(ECDL)的频率调谐范围可以达到30 GHz以上,但是由于激光线宽宽,得到的PDH锁定性能欠佳。回音壁模式激光器(WGM)和掺饵光纤激光器(EDFL)线宽为百Hz量级,是目前高灵敏NICE-OHMS系统中常用的光源。但是WGM目前可以实现了5 GHz的激光频率调谐范围,而EDFL的外部电压可控制的调谐范围仅为3 GHz。使用精细度为55000的腔进行模拟,调制系数β=1,腔长大于8 cm时,可使用WGM激光器实现,腔长大于25 cm时,可以使用EDFL激光器实现。而对于在设计光学腔中常用的伸缩长度为25μm的PZT,随着腔长的增加,对应的腔模频移范围逐渐减小,在腔长为典型的40 cm时,扫描范围大于12 GHz。     

用于测量亚硝酸的长光程吸收光谱仪的研制

This article has been retracted at the request of the authors.