人体内酮体检测技术的研究进展

论述了检测人体内酮体浓度的重要意义和酮体的代谢过程，对各种检测技术的发展过程、检测原理、操作步骤及各自的优缺点进行了比较分析，着重探讨了对血液中β-羟丁酸的检测，并对各种技术的发展方向作了进一步的展望。     

脱氧核糖核酸在硬脂酸铝离子膜上固定杂交及BAR基因片段检测

将石墨粉、固体石蜡和硬脂酸按一定比例混合制得表面富含羧基的碳糊电极,然后在电极表面组装荷正电的铝离子膜。在硬脂酸铝离子膜上进行DNA探针的固定和与目标基因的杂交。以亚甲蓝为杂交指示剂,用循环伏安法优化了DNA的固定和杂交条件。应用该电化学生物传感器以微分脉冲伏安法对转基因玉米外源BAR基因片段进行了检测,结果令人满意。     

柠檬酸试剂中痕量无机阴阳离子的离子色谱法测定

选用柱容量较高、亲水性较强的阴离子分析柱IonPac AS18,以30mmol／L KOH为淋洗液,等度淋洗分析了高浓度柠檬酸中的痕量无机阴离子。选用柱容量较高的阳离子分析柱IonPac CS12A,以H2SO4作淋洗液分析了柠檬酸试剂中的痕量阳离子。在所选色谱条件下,无需样品前处理,直接进样,电导检测,高浓度柠檬酸不影响痕量阴离子或阳离子的测定。方法具有良好的线性(r=0．9941～1．000),样品中所测离子峰面积的相对标准偏差(RSD)均在9．0％以下(n=7),回收率在82．7％～110％之间,检出限低于3．7μg/L。     

氧氟沙星荷移络合物的荧光特性和应用

研究了电子受体氯冉酸(CL)和2,3 二氰5,6 二氯1,4 对苯醌(DDQ)与电子给体氧氟沙星之间的荷移反应。实验发现,氧氟沙星与以上两种电子受体在氯仿中可生成稳定的n π络合物,其荧光强度较之氧氟沙星分别增强了22和54倍。据此建立了两种基于荷移反应简便可靠地测定氧氟沙星的荧光光谱新方法。CL法和DDQ法测定氧氟沙星的质量浓度分别为0 06～2.4μg/mL和0 16～2.0μg/mL时,荧光强度与质量浓度呈良好的线性关系。该方法已用于药物制剂中氧氟沙星的测定,其回收率分别为98.4%～100.9%和98.5%～100.4%。     

聚对苯二甲酰对苯二胺/水滑石纳米复合材料的制备与表征

近20年来,人们已经研究和制备了很多聚合物／层状无机粘土纳米复合材料,但所用无机粘土绝大多数为蒙脱土等具有层状结构的阳离子化合物,而对以水滑石(LDH)等阴离子型化合物为基础制备的聚合物／层状无机物纳米复合材料的研究近期才有报道．     

固相萃取-气相色谱法测定北京市水样中的邻苯二甲酸酯

研究了使用毛细管柱（OV-1701）分离、FID作为检测器的气相色谱法测定水中5种邻苯二甲酸酯（PAEs）[邻苯二甲酸二乙酯（DEP）,邻苯二甲酸二丁酯（DBP）,邻苯二甲酸丁基苄基酯（BBP）,邻苯二甲酸二（2-乙基己基）酯（DEHP）,邻苯二甲酸二环己酯（DCHP）]的色谱条件。5种PAEs检出限在0．1～0．3μg／L之间,所测PAEs的质量浓度在0．5～100μg／L范围内,RSD在2．2％～3．3％之间,各物质校正曲线（质量浓度与峰面积）的相关系数在0．9970～0．9993之间。利用固相萃取技术萃取水中PAEs,回收率在82．5％～110．5％之间,RSD在1．1％～4．0％之间。北京市吴家村污水处理厂4个采样点中邻苯二甲酸酯浓度在（0．7～193．3）μg／L之间。北京市南护城河的3个采样点中邻苯二甲酸酯浓度在（0．1～241．8）μg／L之间。     

棉籽化学成分的分析

采用索氏提取法对棉籽中棉籽油进行了提取,以气相色谱-质谱联用仪进行了分析,分离鉴定出10种脂肪酸,占棉籽油总量的99.52%。并对其主要成分进行了鉴定,主要化学成分为:棕榈酸26.68%,亚油酸66.05%。用蒸馏-萃取法提取棉花籽中挥发性物质,测得棉籽挥发油的量为0.80%,用GC/MS法从棉籽挥发油中分离并确定出16种化学成分。用峰面积归一化法通过化学工作站数据处理系统,得出各化学成分在挥发油中的质量分数。其中主要成分为:石竹烯量高达33.27%。     

8-氨基喹啉-5-磺酸-示波计时电位法快速测定天然水体中锌形态

报道了8-氨基喹啉-5-磺酸(简称8-AQS)-示波计时电位法分别在酸性和碱性条件下测定了天然水样中的锌浓度,发现在酸性下测定的是无机不安定态锌c(Zni),而在碱性下测定的是总溶解态锌c(Zna)。并用该法测定了酸消化水样中的总锌c(ZnT),由c(Zna)-c(Zni)间接得到有机安定态c(Zn0),c(ZnT)-c(Zna)得到颗粒态酸溶态锌c(ZnT),据此可以实现对五种锌形态的区分。测定了10多个实际水样,与经典的离子交换-AES方法进行了对照,结果基本一致。     

Extraction and isolation of lithospermic acid B from Salvia miltiorrhiza Bunge using aqueous two‐phase extraction followed by high‐performance liquid chromatography

A rapid and effective method integrating separation and purification of lithospermic acid B from Salvia miltiorrhiza Bunge was developed by combining an aqueous two‐phase system extraction with preparative chromatography. An aqueous two‐phase system of n‐butyl alcohol/KH₂PO₄ was chosen from seven systems. The influence of parameters including concentration of KH₂PO₄, n‐butyl alcohol concentration, pH, and the ratio of an aqueous two‐phase system to crude extract were investigated using a single factor design. Response surface methodology was subsequently used to find the optimal compositions of an aqueous two‐phase system. Keeping a solvent‐to‐solid ratio of 10, the final optimized composition of an aqueous two‐phase system was 39.1% w/w n‐butyl alcohol and 22.6% w/w KH₂PO₄. Under these conditions a recovery yield of 99.8% and a high partition coefficient of 310.4 were obtained. In a pilot‐scale experiment using optimized conditions, 18.79 g of lithospermic acid B with a purity of 70.5% and in a yield of 99.8% was separated from 0.5 kg of crude extract. Subsequently, 9.94 g lithospermic acid B with a purity of 99.3% and recovery yield of 70.3% was obtained with a preparative chromatographic process, and the two‐step total recovery was 70.1%.     

Poly‐l‐Lactic Acid Nanofiber–Polyamidoamine Hydrogel Composites: Preparation,Properties, and Preliminary Evaluation as Scaffolds for Human Pluripotent Stem Cell Culturing

Electrospun poly‐l ‐lactic acid (PLLA) nanofiber mats carrying surface amine groups, previously introduced by nitrogen atmospheric pressure nonequilibrium plasma, are embedded into aqueous solutions of oligomeric acrylamide‐end capped AGMA1, a biocompatible polyamidoamine with arg‐gly‐asp (RGD)‐reminiscent repeating units. The resultant mixture is finally cured giving PLLA‐AGMA1 hydrogel composites that absorb large amounts of water and, in the swollen state, are translucent, soft, and pliable, yet as strong as the parent PLLA mat. They do not split apart from each other when swollen in water and remain highly flexible and resistant, since the hydrogel portion is covalently grafted onto the PLLA nanofibers via the addition reaction of the surface amine groups to a part of the terminal acrylic double bonds of AGMA1 oligomers. Preliminary tested as scaffolds, the composites prove capable of maintaining short‐term undifferentiated cultures of human pluripotent stem cells in feeder‐free conditions.