A low-temperature electron diffraction study of structural disorder and its relationship to the Kondo effect in ThAsSe

A low-temperature electron diffraction study has been carried out on ThAsSe to search for evidence of structural disorder associated with the low-temperature non-magnetic Kondo effect. A highly structured and extremely complex characteristic diffuse intensity distribution has been observed at low temperature and interpreted in terms of a gradual charge density wave type phase transition upon lowering of temperature involving disordered As-As dimerization within (001) planes. Plausible models of the proposed As-As dimerization have been obtained using a group theoretical approach.     

温度对Al0.5Ga0.5As/AlAs分布布喇格反射器的反射谱影响

采用光学传输矩阵理论对Al0.5Ga0.5As/AlAs材料分布布喇格反射器(DBR)进行理论研究,分析了－10℃到100℃的范围内,温度变化对不同DBR结构的反射光谱影响.结果表明：随着温度的升高,传统20周期DBR的反射光谱向长波长方向移动,速率约0.05 nm/℃,其中由线热膨胀系数带来的影响小于0.001 nm/℃.当传统DBR的周期数增大时,温度对DBR光谱反射率的影响在减小,同时DBR的反射谱峰值波长发生红移.为了降低温度对DBR反射光谱的影响,提出一种新型的复式DBR结构.分析指出：该复式DBR比传统DBR有更大的反射光谱半峰宽,基本能覆盖同温度的AlGaInP LED电致发光光谱,这对提高LED的出光效率有现实意义.     

第一原理计算在铁(镍)基超导体中的应用

铁(镍)基超导体的发现引起了凝聚态物理界的广泛兴趣和关注.第一原理计算以其快速、准确等优点在铁(镍)基超导研究过程中做出了巨大贡献.文章主要介绍了第一原理计算在该研究领域所取得的成果,其中包括电子结构计算,磁性基态的寻找和解释,声子谱和电声子耦合,以及关联效应在该类材料中的作用等.文章还简略介绍了目前的研究现状以及存在的问题,分析了未来的研究方向和可能的解决办法.     

As(III) Determination in the Presence of Pb(II) by Differential Alternative Pulses Voltammetry

Differential Alternative Pulses Voltammetry (DAPV), introduced by the authors earlier, was applied with HMDE for direct As(III) determination in the presence of Pb(II) in natural water without sample pretreatment. Distinguishable peaks of As(III) and Pb(II) were registered in 1 M HCl supporting electrolyte at a concentration ratio as high as 1 : 6, while complete peak overlapping occurs applying DPP at any concentration ratio at the same experimental conditions. In‐situ As(III) determinations in the presence of Pb(II) in contaminated ground waters in Mexico were performed, using especially designed disposable safe mercury drop electrodes.     

桤木锯末对废水中As3+的吸附特性

研究了桤木锯末对水中As3+的吸附特性,并探讨了pH、温度、Hg2+对水中As3+吸附率的影响.结果表明,实验条件下锯末对As3+的最佳吸附pH为4.0--6.0,最佳吸附温度为20℃;当Hg2+与As3+同时存在时,增大Hg2+浓度有利于As3+的吸附;桤木锯末对水中As3+的吸附符合拟二级动力学方程.本研究表明,利...     

土壤砷含量高光谱估算模型研究

以实验室内测取的土壤反射光谱为研究对象,利用PLSR方法建立反射光谱与土壤As含量之间的模型,通过交叉验证、估算检验建模精度,探讨利用反射光谱估算士壤As含量的可行性.通过比较不同光谱预处理方法、不同光谱分辨率和不同OM含量条件下建模、验证和估算结果.表明,MSC方法可以有效去除散射的影响而取得较好的结果(估算R2=0...     

(In, Mn)As nanowires with ultrahigh Mn concentration: Growth, morphology and magnetic anisotropy

(In,Mn)As nanowires with ultrahigh Mn concentration have been successfully grown on GaAs(001) substrates by molecular beam epitaxy. The morphology dependences on Mn concentration and growth temperature are investigated. High Mn concentration and high growth temperature are both necessary for the growth of nanowires. All the (In,Mn)As nanowires are self-aligned along [−110]GaAs, and therefore have the shape magnetic anisotropy with the easy axis along the alignment orientation of the nanowires.     

Influence of thermal annealing duration of buffer layer on the crystalline quality of In0.82Ga0.18As grown on InP substrate by LP-MOCVD

In_0.82Ga_0.18As epilayers were grown on InP substrates using a two-step growth technique by LP-MOCVD. A homogeneous low-temperature (450 °C) In_0.82Ga_0.18As buffer layer was introduced to improve the crystalline quality of epilayers. The influence of low-temperature buffer layer deposition condition, such as thermal annealing duration, on the crystalline quality of the In_0.82Ga_0.18As epilayer was investigated. Double-crystal X-ray diffraction measurement, Hall measurement, and Raman scattering spectrum were used to evaluate the In_0.82Ga_0.18As epilayers. Atomic force microscope was used to study the surface morphology. It is found that the In_0.82Ga_0.18As epilayer, with buffer layer thermal annealing for 5 min, exhibits the best crystalline quality. The change of the surface morphology of the buffer layer after thermal annealing treatment was suggested to explain the phenomenon.     

Lactic acid bacteria in dairy food: Surface characterization and interactions with food matrix components

This review gives an overview of the importance of interactions occurring in dairy matrices between Lactic Acid Bacteria and milk components. Dairy products are important sources of biological active compounds of particular relevance to human health. These compounds include immunoglobulins, whey proteins and peptides, polar lipids, and lactic acid bacteria including probiotics. A better understanding of interactions between bioactive components and their delivery matrix may successfully improve their transport to their target site of action. Pioneering research on probiotic lactic acid bacteria has mainly focused on their host effects. However, very little is known about their interaction with dairy ingredients. Such knowledge could contribute to designing new and more efficient dairy food, and to better understand relationships between milk constituents. The purpose of this review is first to provide an overview of the current knowledge about the biomolecules produced on bacterial surface and the composition of the dairy matter. In order to understand how bacteria interact with dairy molecules, adhesion mechanisms are subsequently reviewed with a special focus on the environmental conditions affecting bacterial adhesion. Methods dedicated to investigate the bacterial surface and to decipher interactions between bacteria and abiotic dairy components are also detailed. Finally, relevant industrial implications of these interactions are presented and discussed.     

Comparative phytotoxicity of methylated and inorganic arsenic- and antimony species to Lemna minor, Wolffia arrhiza and Selenastrum capricornutum

The alkylation of metalloids through the transfer of methyl groups is an important factor in the biogeochemical cycling of elements like arsenic and antimony. In the environment, many different organic and inorganic forms of these elements can therefore be found in soils, sediments or organisms. Studies that compare the ecotoxicity of these different chemical species however are rare. Therefore, this study aimed to generate toxicity data on two scarcely studied organic compounds of arsenic and antimony, as well as to compare their toxicity to the inorganic species, which are studied so far to a higher extent, in order to improve the environmental effect assessment of these elements. To this purpose, bioassays were performed in which three different aquatic organisms (the floating water plants Lemna minor and Wolffia arrhiza and the green alga Selenastrum capricornutum) were exposed to a concentration series of 3 different arsenic species (sodium arsenite — As(III), sodium arsenate — As(V), and monomethylarsonous diiodide — MMAs(III)) and three different antimony species (antimony potassium tartrate hydrate — Sb(III), potassium hexahydroxoantimonate — Sb(V), trimethylantimony(V) bromide — TMSb(V). The observed effect concentrations demonstrated that the inorganic (III)- and (V)-valent species of arsenic were clearly more toxic than the corresponding antimony species. The highest overall toxicity has been shown by MMAs(III) followed by the inorganic As(III). The highest toxicity of the three tested antimony species has been observed for TMSb(V). The observed differences in effect levels stress the importance once more that speciation must not be ignored in toxicity studies.