Simple fabrication of Cu~(2+) doped calcium alginate hydrogel filtration membrane with excellent anti-fouling and antibacterial properties

Herein,copper ion doped calcium alginate(Cu~(2+)/CaAlg) composite hydrogel filtration membranes were prepared by using natural polymer sodium alginate(NaAlg) as raw material.The thermal stability and structure of the composite membranes were characterized by thermogravimetric analysis and infrared spectroscopy.The mechanical strength,anti-fouling performance,hydrophilicity and filtration performance of the membrane were studied.The results show that Cu~(2+)/CaAlg hydrogel membrane has excelle nt mechanical properties and thermal stability.The anti-swelling ability of the membrane was greatly enhanced by doping Cu~(2+).After three alternate filtration cycles,the flux recovery rate of Cu~(2+)/CaAlg hydrogel membrane can still reach 85%,indicating that the membrane has good antipollution performance.When the operation pressure was 0.1 MPa,the rejection of coomassie brilliant blue G250 reached 99.8% with a flux of 46.3 L m ~2 h ~1,while the Na_2 SO_4 rejection was less than 10.0%.The Cu~(2+)/CaAlg membrane was recycled after 24 h in the filtration process,and its flux and rejection rate did not decrease significantly,indicating that the hydrogel membrane has long-term application potential.The Cu~(2+)/CaAlg membrane has a wide range of applications prospect in dye desalination,fine separation and biopharmaceutical technology fields.     

Copper-cobalt-nickel oxide nanowire arrays on copper foams as self-standing anode materials for lithium ion batteries

Numerous scientists are in the pursuit of energy storage materials with high energy and high power density by assembly of electrochemically active materials into conductive scaffolds, owing to the emerging need for next-generation energy storage devices. In this architectures, the active materials bonded to the conductive scaffold can provide a robust and free-standing structure, which is crucial to the fabrication of materials with high gravimetric capacity. Thus, hierarchical copper-cobalt-nickel ternary oxide (CuCoNi-oxide) nanowire arrays grown from copper foam were successfully fabricated as free-standing anode materials for lithium ion batteries (LIBs). CuCoNi-oxide nanowire arrays could provide more active sites owing to the hyperbranched structure, leading to a better specific capacity of 1191 mAh/g, cycle performance of 73% retention in comparison to CuO nanowire structure, which exhibited a specific capacity of 1029 mAh/g and capacity retention of 43%, respectively.     

辐射接枝法制备膨化聚四氟乙烯杂化膜及其抗菌性表征

通过共辐射接枝的方法,将聚丙烯酸成功接枝到膨化聚四氟乙烯薄膜上. 采用NaBH₄还原吸附在接枝链上的银离子,在膜中原位负载银纳米粒子,制备了抗菌性ePTFE杂化膜. 杂化膜的SEM、XPS、XRD和TGA表征结果表明,负载的银纳米粒子粒径为几十纳米至100 nm. 而银纳米粒子的负载量可由聚丙烯酸的接枝率控制. 细菌平板计数法测试结果证明,所制备的杂化膜具有优异的抗菌性,对大肠杆菌的抗菌率高达100%.     

Synthesis and properties of LiMIIPO4 (MII = Mg,Mn0.5Mg0.5, Co0.5Mg0.5) affected by isodivalent doping and Li-sources

NH₄M^IIPO₄·H₂O (M^II = Mg, Mn_0.5Mg_0.5, Co_0.5Mg_0.5) were synthesized by direct-precipitating method. The olivine-like LiM^IIPO₄ were successfully generated through the solid state reaction between the synthesized NH₄M^IIPO₄·H₂O precursors and two different Li-sources (Li₂CO₃ or LiOH·H₂O). The NH₄M^IIPO₄·H₂O and LiM^IIPO₄ compounds were confirmed by TG/DTG/DTA, AAS/AES, FTIR and XRD methods. The structural and morphological properties of LiM^IIPO₄ compounds were studied by XRD and SEM, respectively. The XRD reflection shifts of olivine-like LiM^IIPO₄ from the Li-source of Li₂CO₃ revealed changing toward higher diffraction angles than that of LiM^IIPO₄ from the Li-source of LiOH·H₂O. The XRD shifts of LiM_0.5Mg_0.5PO₄ (M = Mn or Co) compounds confirmed the formation of the single phase of isodivalent doping of Mn²⁺ and Co²⁺ ions according to the change in the lattice parameters and cell volumes. The morphological investigations of the LiM^IIPO₄ obtained from Li₂CO₃ system illustrated the grain-like shape particles having smaller size of about 150–400 nm on account of the sequential transformations of types: deammoniation, dehydration, polycondensation and decarbonization. Conversely, the larger size particles (300–700 nm) of the LiM^IIPO₄ obtained from LiOH·H₂O were observed due to the shorter transformation path through the reactions of types: deammoniation and dehydration without polycondensation and decarbonization.     

Synthesis and antimicrobial screening of tetra Schiff bases of 1,2,4,5-tetra (5-amino-1,3,4-thiadiazole-2-yl)benzene

In the present study, novel tetra Schiff bases were synthesized by condensation of 1,2,4,5-tetra (5-amino-1,3,4-thiadiazole-2-yl)benzene with different aromatic aldehydes. The chemical structures were confirmed by means of IR, ¹H NMR, ¹³C NMR, and elemental analysis. All compounds were screened for antibacterial (Staphylococcus aureus ATCC-9144, Staphylococcus epidermidis ATCC-155, Micrococcus luteus ATCC-4698, Bacillus cereus ATCC-11778, Escherichia coli ATCC-25922, and Pseudomonas aeruginosa ATCC-2853) and antifungal (Aspergillus niger ATCC-9029 and Aspergillus fumigatus ATCC-46645) activities by paper disc diffusion technique. The minimum inhibitory concentrations (MICs) of the compounds were also determined by agar streak dilution method. Among the synthesized compounds 1,2,4,5-tetra[5-(4-nitrobenzylideneamino)-1,3,4-thiadiazole-2-yl]benzene 7 was found to be the most potent antimicrobial activity with MICs of 3.4, 2.1, 1.2, 2.0, 3.1, 2.4, 1.1, and 1.7 μg/mL against the above mentioned respective strains.     

Synthesis and antibacterial activity of ethyl 2-amino-6-methyl-5-oxo- 4-aryl-5,6-dihydro-4H-pyrano[3,2-c]quinoline-3-carboxylate

The three-component reaction of 4-hydroxy-1-methyl-2(1H)-quinolinone, aromatic aldehydes and ethyl cyanoacetate was carried out in the presence of a catalytic amount of 4-dimethyl aminopyridine(DMAP) in aqueous ethanol. The reactions result in the formation of pyranoquinoline derivatives in excellent yields. Antibacterial activity has been evaluated against Gram positive and Gram negative bacteria for some of the synthesized compounds. The results indicated that these compounds are moderately effective against bacterial growth and their effectiveness is highest against Pseudomonas aeruginosa.     

Ternary Solid Nano Organic/Inorganic Composite of Lanthanum with Acetic Acid and Curcumin/ Hydroxyapatite and Its Antibacterial Activity

Ternary solid complex was synthesized via hybridization of curcumin（Cur）, hydroxyapatite（HAP）, lanthanum（La） and acetic acid（HAc）. The nano-scale hybrid composite of La-Cur/HAP was directly prepared by the wet method. The morphologies and structures of the composite were characterized by scanning electron microscopy （SEM）, infrared（IR） spectroscopy, X-ray diffraction（XRD）, transmission electron microscopy（TEM） and energy dispersive X-ray spectroscopy. The antibacterial activities were tested by methods of minimum inhibitory concentration （MIC） and minimum bactericidal concentration（MBC）. The results show that the size of the La-Cur/HAP composite is less than 100 nm, and the composite exhibits strong bacteriostatic activity against Escherichia coli（E, colt） and Staphylococcus aureus（S, aureus） at low concentrations（in the range of 26-92μg/mL）. The composite can exhibit both of the bacteria and shows higher antibacterial activity against S. aureus than against E. colt. At the same time, La-Cur/HAP shows stronger antibacterial efficiency than ampicillin/HAP.     

Synthesis,characterization, thermal stability and antibacterial activity of coumarin based methacrylate copolymers

Monomer of 7-methacryloyloxy-4-methylcoumarin(MAOMC) was synthesized and characterized by FTIR, 1H-NMR and 13C-NMR spectroscopy. Copolymers of MAOMC with butoxyethylmethacrylate(BOEMA) at different feed compositions were prepared by free radical solution polymerization at(70 ± 1) °C in ethylmethylketone(EMK) using benzyl peroxide(BPO) as an initiator. The copolymers were characterized by FTIR and 1H-NMR spectroscopy. Thermogravimetric analysis(TGA) and differential scanning calorimetry(DSC) of the copolymers showed moderate thermal stability and higher Tg values. Gel permeation chromatography(GPC) was used to find out the molecular weights of the different copolymers. Antibacterial activities of the copolymers were also investigated against the selected pathogenic bacteria's. The antibacterial activity of the copolymer increases as the MAOMC content increases in the copolymer. This shows that coumarin moiety plays a very important role in the antibacterial activity.     

基于正电荷和光热协同效应的新型半导体聚合物纳米抗菌材料

由于抗生素的不当使用和细菌多药耐药的出现, 迫切需要开发新的抗菌剂. 本文制备了具有光热转换性能的正电荷半导体高分子材料及具有协同抗菌活性的半导体聚合物纳米粒子(SP-PPh₃ NPs). SP-PPh₃ NPs的光热转化效率为43.8%. 带正电荷的SP-PPh₃ NPs可以附着在细菌上, 有助于将热量有效传递给细菌. 在热和正电荷的协同作用下, SP-PPh₃ NPs对革兰氏阴性大肠杆菌(E. coli)和革兰氏阳性金黄色葡萄球菌(S. aureus)均具有抗菌活性, 其对二者的体外抑菌率分别为99.9%和98.6%. 此外, SP-PPh₃ NPs具有良好的生物相容性, 对小鼠的主要器官几乎无副作用. 对细菌感染的小鼠皮肤伤口用SP-PPh₃ NPs治疗12 d后, 伤口可以很好地愈合.     

Evaluation of various biological activities of natural compounds by TLC/HPTLC

Abstract

Over the last years, thin layer chromatography (TLC) has become an increasingly important tool in the analysis of natural compounds, being used not only as a simple method of separation, identification, and quantitative determination of natural constituents, but also as a method for evaluating the potential applications of the separated compounds, different bioassays being compatible with TLC. This is due to the TLC advantages, of which could be mentioned: the possibility to simply, quickly, and flexibly analyze many samples in parallel, without the need for special steps of sample purification, obtaining visual results, and the possibility of multiple detections, all of these being achieved at very low costs. Considering these, the aim of this study is to give an overview on the application of TLC in evaluation of different biological activities of natural compounds, focusing on antioxidant, enzymatic, antimicrobial, and hormonal activities.