Modification of HPTLC-plates by in situ chemical bonding with non-polar and polar organosilanes

A method has been developed for the preparation of modified silica plates for high performance thin-layer chromatography (HPTLC). Some typical organosilanes were thus allowed to react in situ with the silica of Merck HPTLC-plates. This method was found to be highly reproducible, simple and cheap. Non-polar plates were prepared and compared with commercial plates from Merck, Whatman and Macherey-Nagel. Modification with cyanodecyltrichlorosilane resulted in plates that showed good coverage, efficiency and low residual silica activity. Silica modified with a multifunctional silane has different properties in different organic solvents. It will appear to be non-polar in a polar solvent and vice versa. New advantageous separation systems are thus made feasible by the presence of cyano groups on the plate. The utility of modified thin-layer plates is demonstrated by the separation of some homologues of p-hydroxybenzoic acid esters and of some polycyclic aromatic hydrocarbons.     

Self-organization of polymer particles on hydrophobic solid substrates in aqueous media. I. Self-organization of cationic polymer particles on alkylated glass plates

Monodisperse, cationic polymer particles bearing quaternary ammonium groups effectively self-organized on hydrophobic solid substrates such as alkylated glass plates and polymer films to form particle monolayers. With an increase of the particle surface charge density, the surface coverage decreased and the morphology of particle monolayers changed from aggregated type to dispersed type. The dispersed type of particle monolayers having a relatively regular particle distance was formed at higher temperature. The self-organization behaviors on alkylated glass plates were different from those on unmodified glass plates through electrostatic interaction. The formation of particle monolayers on alkylated glass plates occurred only over a certain latex concentration range in contrast with that on unmodified glass plate. The adhesive strength of particle monolayers was enhanced by annealing at temperatures above the glass transition temperature (T _g) of the particles. Lens-shaped particle monolayers were fabricated by annealing the dispersed type of particle monolayers.     

On the applicability of the “abt” concept

Kaiser's “abt” concept rests on the experimental establishment of a linear relation between band width at half height, b_0.5, and capacity ratio, k, according to His column specification quantity, h_real, is dependent on the square of the slope a, obtained from a linear regression analysis based on this relation. It is shown in the present paper that an improvement of the experimental conditions leading to a lower extra-column contribution to band broadening, b, introduces a tendency towards a negative curvature in the plot at low k values. The mean slope increases, and an uncritical linear regression would yield an h_real-value which is higher than before and which would be in the opposite direction to the requirements of a reliable column specification. Generally the linear regression analysis has to be moved to higher k regions in cases of curvature, especially as it is also shown that h_real is an estimation of the traditional HETP value, H∞, that would be obtained when k approaches infinity. This theoretically expected relation is a strong motivation for the use of h_real as a column specification, since the b_0.5-value associated with H∞ is expected to be practically independent of b.     

Self‐Assembly Film of Zeolite Y Nanocrystals Loading Palladium on an Au Electrode for Electrochemical Applications

Nano‐scale zeolite Y crystals were synthesized, and palladium nanoparticles were prepared in the supercage of the zeolite by “ship‐in‐a‐bottle” approach. A novel method to fabricate zeolite‐modified electrode (ZME) loading Pd nanoparticles was developed, in which the zeolite Y loading Pd²⁺ ions was self‐assembled on (3‐mercaptopropyl) trimethoxysilane‐attached Au surface to form the stable and density packed multilayers (SAM‐ZME). The structures of zeolite Y and the SAM‐ZME were investigated by using TEM, XRD and SEM techniques. Pd²⁺ ions in the SAM‐ZME were converted into Pd nanoparticles (Pd_n⁰) by two steps consisting of the electrochemical reduction as well as the succeeding admission and release of CO. The redox couple [Fe(CN)₆]^3?/4? was used to probe the electron‐transfer barrier properties during self‐assembling process. Moreover, the special properties of the SAM‐ZME loading Pd_n⁰ were studied by using cyclic voltammetry and CO‐probe in situ FTIR spectroscopy. The results illustrated that Pd_n⁰ in the SAM‐ZME exhibits higher electrocatalytic activity for oxidation of adsorbed CO than that of ZME prepared in our previous study by zeolite coating method. The present study is of importance in design and preparation of SAM‐ZME, which poccesseses excellent properties for the immobilization of electrocatalysts or biomolecules.     

High-Throughput Analysis of Sofalcone in Human Plasma by Use of Automated 96-Well Protein Precipitation and LC-MS-MS

A sensitive and selective method for the determination of sofalcone in human plasma was established by use of protein precipitation and liquid chromatography-tandem mass spectrometry. Plasma samples were transferred into 96-well plate using an automated sample handling system and spiked with 10 L of 2 g mL^–1 internal standard solution (d₃-sofalcone). 0.5 mL of acetonitrile was added to the 96-well plate and the plasma samples were then vortexed for 30 sec. After centrifugation, the supernatant was transferred into another 96-well plate and completely evaporated at 40 °C under a stream of nitrogen. The dry residue was reconstituted with mobile phase. All sample transfer and protein precipitation was automated through the application of both the PerkinElmer MultiPROBE II HT and TOMTEC Quadra 96 workstation. The limit of quantitation of sofalcone was 2 ng mL^–1 using a sample volume of 0.2 mL for the analysis. The reproducibility of the method was evaluated by analyzing five samples at nine quality control (QC) levels over the nominal concentration range from 2 ng mL^–1 to 1000 ng mL^–1. Validation of the method showed that the assay has good precision and accuracy. Sofalcone and internal standard produced a protonated precursor ion ([M+H]⁺) at m/z 451 and 454, and both gave a corresponding product ion at m/z 315. The high sample throughput of the method has been successfully applied to a pharmacokinetic study of sofalcone in human plasma.     

Evaluation of phenyldimethylethoxysilane treated high-performance thin-layer chromatographic plates. Application to analysis of flavonoids inScutellariae radix

Summary The retention and selectivity of flavonoids (baicalin, baicalein, wogonin, oroxylin A) inScutellariae radix have been studies by high-performance thin-layer chromatography on phenyldimethylethoxysilane-treated silica plates. The silica plates treated with phenyl groups were used for physical and chemical analysis. From elemental carbon analysis, the maximum number of bonded phenyl surface groups per gram was calculated to be 0.467×10²¹ (Oginal silica plate: Merck Art. 15109, Silica gel 100 F₂₅₄). With methanol-1/15 M phosphate buffer (pH 6.2) mixtures as mobile phase, baicalin, baicalein, wogonin, and oroxylin A inScutellariae radix were separated. It has been shown that phenyl-treated plates are more suitable for selective separation of baicalin, baicalein, wogonin, and oroxylin A than octadecyl-treated plates.     

The thermal properties of poly(oxy-1,4-benzoyl), poly(oxy-2,6-naphthoyl), and its copolymers

The thermal properties, i.e., heat capacity, enthalpy, entropy, and Gibbs function, and the transition behavior of the copolymer system of 4-hydroxybenzoic acid and 2,6-hydroxynaphthoic acid have been studied based on differential scanning calorimetry. The heat capacities of the glass, crystal, and anisotropic melt are shown to be largely additive on a molar basis. Additivity is lost in the two transition regions, glass transition and disordering transition. Isothermal crystallization experiments on the copolymers revealed the existence of two types of crystals which melt at high temperature (fast-grown crystals) and low temperature (slowly grown crystals). The ATHAS computation method is used to bring heat capacities of the solid state into agreement with approximate frequency spectra. The changes in heat capacity at the glass transitions occur at 434°K for the poly(oxy-1,4-benzoyl) [33.2 J/(K mol)] and at 420°K for poly(oxy-2,6-naphthoyl) [46.5 J/(K mol)]. The copolymers have a transition range of above 100°K. The anisotropic melt is linked to the well-known condis state of poly(oxy-1,4-benzoyl) by a continuous changes in disorder and mobility without an additional first-order transition.     

Surface free energies of styrene-acrylic acid copolymer plates prepared in various frames

Styrene (St)-acrylic acid (AA) copolymer plates were synthesized in the frames made of glass, aluminum (Al) and poly(difluoroethylene) (PDFE). Surface properties of the prepared copolymer plates were characterized with regard to critical surface tension ( _C ), chemical components by IR analysis and surface energies (total energy, _S ; dispersion force components, _S ^d ; polar component, _S ^p ; hydrogen bonding component, _S ^h ) and the following results were obtained.The _C values of the copolymer plates increased with AA content and also depended on the sort of the used frame. The increasing order of the _C values of the copolymer plates corresponded to those of the used frames, namely, PDFE frame < Al frame < Glass frame.The prepared copolymer plates with low AA contents (ca. 10 mol%) were enriched in the AA moiety in the surface layer regardless of the kind of the used frame.The total and the individual components of the surface free energies of the copolymer plates were largely affected by the property of the used frame. The glass frame gave the plate with higher _S ^h values suggesting preferential orientation of the polar site of AA component.