改进的单纯形优化法用于混合稀土的同时测定

本文应用改进的单纯形优化法较好地弥补了目前在分析化学计量学中得到广泛应用的卡尔曼滤波法所存在的不足，交法应用于混合稀土的同时测定中，获得了满意的结果，结果准确度较卡尔滤波法的有显著的提高。     

Direct Identification of the Carbon Skeleton of Organic Compounds using Double Quantum Coherence 13C-NMR Spectroscopy. The INADEQUATE Pulse Sequence

NMR spectroscopy plays an important part in the determination of the structures of organic compounds. The parameters of importance here are the chemical shifts of the ¹H and ¹³C nuclei and the spin-spin interactions both between ¹H nuclei and between ¹H and ¹³C nuclei. Couplings between ¹³C nuclei were almost completely neglected until a few years ago, since they were extremely difficult to observe because of the low natural abundance of ¹³C. However, it is these couplings which afford information directly on the carbon-carbon connectivities in the molecule. It is now possible to use a special NMR pulse sequence to make these couplings more readily visible: the result of using this sequence is a ¹³C-NMR spectrum from which the carbon skeleton concerned can be directly read off. Two-dimensional spectra in particular are very easy to evaluate. The pulse sequence involved, which bears the somewhat puzzling name INADEQUATE, produces double-quantum coherences from which the NMR signals of the coupled carbon nuclei can be obtained. In this article the principle of double-quantum coherence is described and a number of examples for the application of the INADEQUATE pulse sequences to problems in synthetic organic chemistry, biosynthesis and natural products chemistry are presented; in addition, the possibility of applying the INADEQUATE method to other nuclei is considered.     

Chromatography with Supercritical Fluids

Chromatography with supercritical fluids unites the features of both gas chromatography and liquid chromatography, yet retains special characteristics of its own. The diffusion coefficient and particularly the viscosity of fluid phases may approach values for low-pressure gases, while the solvent power may be similar to that of liquids. However, with supercritical fluids it is possible to control chromatographic separations very effectively by pressure programming, since the solubility increases with increasing density. Temperature programming, on the other hand, can have the opposite effect to that in gas- or liquid-chromatography since the density decreases with increasing temperature at a given pressure. Supercritical fluid chromatography is primarily of interest for the separation of higher molecular weight compounds. The efficiency of this method of separation is demonstrated on several homologous series. Thus, a styrene oligomer with nominal M_w=2200 can be resolved by a pressure and temperature program into 40 species.     

Aspects of investigating scrambling in the synthesis of porphyrins: different analytical methods

Herein, we discuss the analyses and quantification of the different components in porphyrin mixtures, prepared from p-anisaldehyde, p-tolualdehyde, and 5-(4-bromophenyl)-dipyrromethane with acid catalysis, using NMR and HPLC. The advantages and disadvantages of these analytical methods are emphasized. Due to the similar size of a bromine atom and a methyl group it was possible to grow crystals suitable for X-ray crystallographic studies from a mixture of porphyrins, where the 4-position of the meso-phenyl rings was either substituted with methyl groups or bromine atoms. We also show that X-ray studies are inferior to NMR analysis for determining the components in a porphyrin mixture.     

Theoretical treatment of first-order reversible reactions occurring in a chromatographic reactor, on the basis of consecutive reactions

Summary Analytical peak-shape equations were derived for first-order reversible reactions occurring in a chromatographic reactor by treating the reversible reactions as consecutive reactions with alternating products. The results of the analytical peak-shape equations were compared with those from a numerical solution of the partial differential equation system modeling the chromatographic reactor. For small to medium conversions the correspondence was found to be sufficiently close to enable substitution of the numerical solution in fitting procedures for the determination of rate constants. Presented at the 21^st ISC held in Stuttgart, Germany, 15^th–20^th September, 1996     

从自模式曲线分辨到渐进类因子分析法

本文对自模式曲线分辨法的发展作了简要回顾，其中特别对近来来迅速发展的一类用于色谱波谱联用仪产生的二维分析数据的渐进类分析法作了详尽的讨论。这些新化学计量学方法的涌现，对复杂的未知分析体系的定性定量分析，将带来深刻的变化。     

微流控芯片分析系统中硅胶整体柱和膜滤复合预处理单元的构建

以改性C18反相硅胶整体柱为微流控芯片分析系统中固相萃取介质材料, 构建不同功能单元的样品预处理微分析系统, 实现了血清样品中痕量盐酸多巴酚丁胺的富集. 初步构建了单一改性硅胶微柱固相萃取预处理单元, 测试得到了改性硅胶整体柱对血清中痕量盐酸多巴酚丁胺的平均富集倍数为77.2, RSD为12.35％. 为了提高测试的精密度, 进而设计含膜复合式预处理芯片, 探讨了不同预处理单元对血清样品中痕量盐酸多巴酚丁胺富集效率的影响, 优化设计了外接式硅胶整体柱-亲和膜微芯片固相萃取预处理单元, 复合式的反相硅胶整体柱对血清中微量盐酸多巴酚丁胺的平均富集倍数提高到89.4, RSD为4.37％. 结果显示了该预处理单元在血清中痕量药物富集的可行性和有效性.     

短脉冲激光加热模型的遴选原则

 利用推导出的1维半空间光致热弹性应力响应的精确解,对激光与材料相互作用的加热模型的选取进行了研究。理论分析和计算结果表明：常用的表面加热模型只有在热穿透深度远大于光吸收长度时有效,若将其应用于超短脉冲激光（ps以下量级）加热的情况,可能会导致较大的误差;皮秒和飞秒激光辐照的热效应须用体加热模型计算。     

Assessment of sandwich models for the prediction of sound transmission loss in unidirectional sandwich panels

The consistent higher-order approach and the two-parameter foundation formulation are used for the derivation of sound transmission loss in symmetric unidirectional (infinitely wide) sandwich panels with isotropic face sheets. In both models, transmission loss is calculated using decoupled equations representing symmetric and anti-symmetric motions of a sandwich panel. The closed-form expressions for impedances and transmission coefficient of a symmetric sandwich panel with an isotropic core are derived for the two-parameter foundation model. A comparison between the numerical predictions based on the two sandwich models and available experimental data shows that the consistent higher-order formulation can be used to predict the transmission loss in symmetric sandwich panels with both honeycomb and isotropic cores. For prediction of transmission loss of symmetric sandwich panels with an isotropic core, the two-parameter foundation model is more convenient, while the consistent higher-order approach is more accurate.     

Sound transmission prediction by 3-D elasticity theory

The problem of sound transmission through layered panel structures is studied with the exact theory of three-dimensional (3-D) elasticity. The exact solution to the 3-D elasticity equations is obtained by the use of the Fourier spectral method. Based on this analytical solution, a transfer matrix is derived that relates the spectral displacements and stresses on the one surface of the panel to those on the opposite panel surface. The transfer matrix is then used to develop the analytical solutions for sound reflection and transmission coefficients. Explicit, concise expressions are obtained for the analytical solutions of the acoustic transmission and reflection coefficients under the general conditions of layered anisotropic panels. Examples are given for both single-layer and sandwich panels. Predictions on sound transmission from the 3-D elasticity theory are compared with available data from other methods, and the results are discussed.