Physical properties and phase separation structure of Antheraea pernyi/Bombyx mori silk fibroin blend films

The physical structure and compatibility of solution-cast Antheraea pernyi/Bombyx mori silk fibroin blend films were stuided by differential scanning calorimetry (DSC), thermomechanical (TMA) and thermogravimetric (TGA) analysis, dynamic viscoelastic measurement, infrared spectroscopy, and x-ray diffractometry. The DSC curves of the blend films showed independent endotherms at 280 and 358°C, corresponding to the thermal decomposition of B. mori and A. pernyi silk fibroins with random coil conformation. The intensity was roughly proportionate to the amount of each component in the blend. The thermal behavior corresponding to the conformational transitions induced by heating on A. pernyi and B. mori silk fibroins overlapped in the temperature range 190–230°C. Thermal expansion and contraction properties, as well as weight retention behavior of the blend films were intermediate between the pure components, as shown by the TMA and TGA curves. The onset temperature of the storage modulus curve decreased markedly, approaching that of B. mori silk fibroin film when the amount of this component in the blend increased. The loss modulus curve of the blend films showed two peaks at ca. 190 and 210°C, the former corresponding to B. mori, and the latter to A. pernyi silk fibroin. Infrared spectra of the blends exhibited absorption bands characteristic of the pure components overlapping in the spectral region 2000–400 cm^?1. The x-ray diffraction peaks at 23 and 21.5°, attributed to the crystalline spacings of A. pernyi and B. mori fibroins, respectively, overlapped in the diffraction curves of the blends, while the peak at 11.4°, of A. pernyi, increased as the content of this fibroin in the blend increased. The degree of crystallinity, calculated from the x-ray diffraction curves, diminished as the amount of B. mori silk fibroin decreased. A low degree of compatibility exists between the two fibroins when they are cast from aqueous solution in the experimental conditions adopted in this work. © 1994 John Wiley & Sons, Inc.     

A contribution to the ternary phase diagram Co-Sb-Te

The melting behaviour, some phase boundaries and the lattice parameters in the region of the NiAs-type phase in the ternary system cobalt-antimony-tellurium have been determined by differential thermal analysis and X-ray diffraction. A projection of the liquidus surface and the phase relationships in different sections with constant antimony/tellurium ratios are presented. The peculiar variation of the lattice parameters with the composition of the nonstoichiometric NiAs-type phase is discussed in terms of the defect structure.Dedicated to Prof. K. L. Komarek on the occasion of his 65th birthday     

混合范数空间中函数的Taylor系数

本文研究了混合范数空间Ｈ（ｐ，ｑ，ａ）中解析函数ｆ的Ｔａｙｌｏｒ系数，对０＜ｐ≤２，０＜ｑ＜∞，ａ＞０和２≤ｐ＜∞，０＜ｑ＜∞，ａ＞０两种情形，分别给出了ｆ属于Ｈ（ｐ，ｑ，ａ）的必要条件和充分条件。用上述结果我们还得到了几个关于混合范数空间的乘子定理，这些结果也推广了Ｈａｒｄｙ和Ｌｉｔｔｌｅｗｏｏｄ关于Ｈ＾ｐ空间的相应结论。     

Rheological and diffusion properties of a dextran-con A polymer in the presence of Insulin and Magnesium

Previous work carried out in our laboratories has focused on the formation and investigation of a dextran and concanavalin A (con A) based gel, which has the ability to alter its conformational structure in the presence and absence of free and terminal glucoses such that a gel–sol phase transition occurs. Here we report the diffusion and rheological investigations in to the effects of the addition of insulin and varyingconcentrations of magnesium chloride hexahydrate (Mg₂Cl₂6H₂O) at 20 and 37 °C. Rheological examination of glucose-sensitive (dextran-con A) gels were conducted using a cone and plate viscometer used in continual rotation and oscillatory modes. The results are interpreted in terms of the structure of the gel network and suggest rheological assessment provides an effective method of assessing the properties of gel systems. The subsequent testing of such formulations in in-vitro diffusion experiments revealed a reduction in the rate of diffusivity in the insulin marker, poly R-478 dye. The performance of this self-regulating drug delivery system has been examined and the addition of insulin and magnesium chloride may alter the way in which the gel operates as a drug delivery device and in the delivery of insulin. This may have implications for other ligands.     

Separation of Monovinyl and Divinyl Protochlorophyllides Using C30 Reverse Phase High Performance Liquid Chromatography Column: Analytical and Preparative Applications

A new, high performance liquid chromatography method has been developed for the separation of monovinyl- and divinyl-protochlorophyllides, using commercially available, C₃₀ reverse phase column and isocratic elution. This method can be used both for analytical applications and preparative scale purification of monovinyl- and divinyl-protochlorophyllides using the same column where submilimolar concentrations of the crude protochlorophyllide extract can be separated in one run. The purity of the obtained protochlorophyllides was demonstrated by spectroscopic methods, as well by the formation of aggregates in toluene.     

带相变的铸坯热弹塑性应力分析基本方程

本文讨论了温度、相变、应力间的耦合关系，给出了铸坯在考虑相变时的热弹塑性蠕变的本构关系，以及计算铸坯内应力的有限元迭代公式。     

Novel ethero atoms containing polyesters based on 2,6‐naphthalendicarboxylic acid: A comparative study with poly(butylene naphthalate)

Poly(butylene naphthalate) (PBN), poly(diethylene naphthalate) (PDEN), and poly(thiodiethylene naphthalate) (PTDEN) were synthesized and characterized in terms of chemical structure and molecular weight. The polyesters were examined by TGA, DSC, and DMTA. All the polymers showed a good thermal stability, even though depending on chemical structure. At room temperature they appeared as semicrystalline materials; the effect of the introduction along the PBN polymer chain of ether oxygen atoms or sulfur ones was a lowering in the T_g value, a decrement of T_m, and a decrease of the crystallization rate. Changing in chemical structure also affects the main α absorption associated with the glass transition which moves to lower temperature and whose energetic requirements decrease. The results were explained as due to the presence of highly flexible C? S? C or C? O? C bonds in the polymeric chain. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 1694–1703, 2007     

The influence of hard‐segments on two‐phase structure and shape memory properties of PCL‐based segmented polyurethanes

Poly(ε‐caprolactone)‐based segmented polyurethanes (PCLUs) were prepared from poly(ε‐caprolactone) diol, diisocyanates (DI), and 1,4‐butanediol. The DIs used were 4,4′‐diphenylmethane diisocyanate (MDI), 2,4‐toluenediisocyanate (TDI), isophorone diisocyanate (IPDI), and hexamethylene diisocyanate (HDI). Differential scanning calorimetry, small‐angle X‐ray scattering, and dynamic mechanical analysis were employed to characterize the two‐phase structures of all PCLUs. It was found that HDI‐ and MDI‐based PCLUs had higher degree of microphase separation than did IPDI‐ and TDI‐based PCLUs, which was primarily due to the crystallization of HDI‐ and MDI‐based hard‐segments. As a result, the HDI‐based PCLU exhibited the highest recovery force up to 6 MPa and slowest stress relaxation with increasing temperature. Besides, it was found that the partial damage in hard‐segment domains during the sample deformation was responsible for the incomplete shape‐recovery of PCLUs after the first deformation, but the damage did not develop during the subsequent deformation. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 557–570, 2007     

Simulation of single‐ and two‐phase flows on sliding unstructured meshes using finite volume method

The paper presents an efficient finite volume method for unstructured grids with rotating sliding parts composed of arbitrary polyhedral elements for both single‐ and two‐phase flows. Mathematical model used in computations is based on the ensemble averaged conservation equations. These equations are solved for each phase and in case of single‐phase flow reduce to the transient Reynolds‐averaged Navier–Stokes (TRANS) equations. Transient flow induced by rotating impellers is thus resolved in time. The use of unstructured grids allows an easy and flexible meshing for the entire flow domain. Polyhedral cell volumes are created on the arbitrary mesh interface placed between rotating and static parts. Cells within the rotating parts move each time step and the new faces are created on the arbitrary interfaces only, while the rest of the domain remain ‘topologically’ unchanged. Implicit discretization scheme allows a wide range of time‐step sizes, which further reduce the computational effort. Special attention is given to the interpolation practices used for the reconstruction of the face quantities. Mass fluxes are recalculated at the beginning of each time step by using an interpolation scheme, which enhances the coupling between the pressure and velocity fields. The model has been implemented into the commercially available CFD code AVL SWIFT (AVL AST, SWIFT Manual 3.1, AVL List GmbH, Graz, Austria, 2002). Single‐phase flow in a mixing vessel stirred by a six‐bladed Rushton‐type turbine and two‐phase flow in aerated stirred vessel with the four‐blade Rushton impeller are simulated. The results are compared with the available experimental data, and good agreement is observed. The proposed algorithm is proved to be both stable and accurate for single‐phase as well as for the two‐phase flows calculations. Copyright 2004 John Wiley & Sons, Ltd.     

Phase Measurement Algorithm in Wavelength Scanned Fizeau Interferometer

Wavelength scanned interferometry allows the simultaneous measurement of top surface shape and optical thickness variation of a transparent object consisting of several parallel surfaces. Interference signals from these surfaces can be separated in frequency space, and their phases are detected by discrete Fourier analysis. However, these signal frequencies are shifted from the detection frequency by the refractive index dispersion of the object and a nonlinearity of the wavelength scanning. The Fourier analysis is sensitive to the detuning of the signal frequency and suffers from the multiple-beam interference noise. Conventional error-compensating algorithms cannot be applied to an object consisting of more than three reflecting surfaces. We derive a new 2N-1 sample error-compensating algorithm, which allows the phase detection of any order of harmonic frequency among the interference signals. The new algorithm suppresses the effect of signal frequency detuning as well as the multiple-beam interference noise and can be applied to the measurement of complex objects consisting of more than three reflecting surfaces.