Hierarchical Hybrid Peroxidase Catalysts for Remediation of Phenol Wastewater

We report a new family of hierarchical hybrid catalysts comprised of horseradish peroxidase (HRP)–magnetic nanoparticles for advanced oxidation processes and demonstrate their utility in the removal of phenol from water. The immobilized HRP catalyzes the oxidation of phenols in the presence of H₂O₂, producing free radicals. The phenoxy radicals react with each other in a non‐enzymatic process to form polymers, which can be removed by precipitation with salts or condensation. The hybrid peroxidase catalysts exhibit three times higher activity than free HRP and are able to remove three times more phenol from water compared to free HRP under similar conditions. In addition, the hybrid catalysts reduce substrate inhibition and limit inactivation from reaction products, which are common problems with free or conventionally immobilized enzymes. Reusability is improved when the HRP–magnetic nanoparticle hybrids are supported on micron‐scale magnetic particles, and can be retained with a specially designed magnetically driven reactor. The performance of the hybrid catalysts makes them attractive for several industrial and environmental applications and their development might pave the way for practical applications by eliminating most of the limitations that have prevented the use of free or conventionally immobilized enzymes.     

XMgO·YMg(OH)_2吸附剂除氟机理及其净化水的水质研究

研究了XMg O·YMg(OH)2对水中氟离子的吸附性能,考察了吸附时间、吸附剂用量、含氟水p H值、温度、含氟水初始浓度等因素对吸附的影响。实验结果表明,在较宽的p H(3.4~8.4)值和水温(22~51℃)范围内,XMg O·YMg(OH)2对水中氟离子具有极强的吸附能力,室温下0.4g XMg O·YMg(OH)2可将100m L浓度为30mg F-1·L-1含氟水处理为符合含氟标准的饮用水。氟离子在XMg O·YMg(OH)2上的吸附速率较大,30min内基本达到吸附平衡,吸附平衡符合Langmuir方程,在50min内达到饱和吸附,室温下饱和吸附量为13.46mg·g-1。净化水呈微碱性,含有5.68~15.07mg·L-1Mg2+,有益于人体健康。吸附饱和后的XMg O·YMg(OH)2经焙烧再生,除氟率可达81%。     

非晶Ce-Ti氧化物用于NH3选择性催化还原NO的原位红外研究

采用原位红外光谱研究了在具有短程有序Ce-O-Ti结构的非晶Ce-Ti氧化物上NH₃选择性催化还原（SCR） NO_x反应. 在反应条件下,催化剂表面主要被NH₃吸附物种覆盖,而检测不到NO_x吸附物种. 经测定,NO的反应级数为0.5-0.6,表明Langmuir-Hinshelwood机理和Eley-Rideal机理同时存在. 可能的机理是NH₃吸附物种和弱吸附的NO_x反应,生成NH_yNO₃ （y = 0-4）活性中间物种,并通过GAUSSIAN计算和原位红外结果证实了它们的存在. Ce-O-Ti结构中Ce与Ti之间表现出原子尺度的相互作用,所以在SCR反应的活性温度窗口下,催化剂的氧化还原活性提高.     

原位漫反射傅里叶变换红外光谱研究锰铁基催化剂上低温选择性催化还原反应机理简

采用自蔓延燃烧法制备了Ti_0.9Mn_0.05Fe_0.05O_2-δ催化剂,运用原位漫反射傅里叶变换红外光谱对该催化剂的NO和NH₃稳态吸附以及NO和NH₃瞬态反应进行了详细地分析与讨论. 结果表明,相比于Lewis酸性位,150℃时Brönsted酸性位吸附的NH₃更具有SCR活性;与双齿硝酸盐和桥式硝酸盐相比,NO吸附产生的单齿硝酸盐是主要的中间物种;该SCR反应遵循Eley-Rideal和Langmuir-Hinshelwood机理,但以后者为主. 另外,O₂的存在有利于NO的氧化和配位态NH₃的活化.     

Mechanical study on the impact of an effective solvent support-removal methodology for FDM Ultem 9085 parts

The use of support material to produce Fused Deposition Modeling parts is often unavoidable. The support removal task tends to be laborious and time-consuming when no soluble support materials are available, which is the case of the high-performance thermoplastic Ultem™ 9085. This paper investigates the effect of different solvent/solvent mixtures on Ultem’s mechanical properties with the aim to identify a solvent capable of dissolving its support material (a polysulfone) without noticeably damaging the model material. To do so, initial solubility tests have helped narrow the list of solvent candidates. These have been followed by infrared analyses to identify the presence of dissolved polymers in the media, as well as scanning electron microscope micrographs to analyze the surface topography of the treated parts. Finally, tensile and flexural tests have permitted to quantify the change on Ultem’s mechanical properties as a function of the treatment time. Major findings include a reproducible method for softening or eliminating Ultem’s support material with non-significant changes in their mechanical properties. The outcome of this work represents a first step on the lookout for a solution to facilitate the removal of polysulfone and is considered of great interest for the scientific community due to the rise of Ultem as a structural material.     

Rb2[U(NH2)6], a Rubidium Hexaamidouranate(IV) obtained from the Reaction of UI3 with RbNH2 in Anhydrous Ammonia

The pyrophoric compound Rb₂[U(NH₂)₆] was obtained as a grey to black powder from the reaction of more than three equivalents of RbNH₂ with UI₃ in anhydrous liquid ammonia. During the process, U^III is oxidized to U^IV and ammonia is reduced under evolution of H₂. Rb₂[U(NH₂)₆] crystallizes in the cubic crystal system, space group Fm3 m, with the lattice parameter a = 9.7870(12) Å, V = 937.4(2) ų, Z = 4 at T = 293 K. It is isotypic to K₂PtCl₆. The compound contains the unprecedented hexaamidouranate(IV) anion [U(NH₂)₆]^2–.     

空心球状C@SnO2@SnS2的制备及光催化去除Cr（Ⅵ）性能研究

将SnO2负载在碳球上通过不完全烧结的方法得到含有大量碳的空心状C@SnO2,随后加入TAA(硫代乙酰胺),利用离子交换法在水热过程中制备了具有不同硫化程度的空心结构的C@SnO2@SnS2三元复合物。利用XRD、FESEM、TEM、XPS、UV-Vis DRS、PL等测试手段对合成样品进行表征,并测试了其光催化去除Cr(VI)的性能。结果表明,C、SnO2和SnS2三者之间的协同作用以及空心结构的形貌显著增强了SnO2的光催化性能,其中CSS-2样品对Cr(VI)具有最佳的去除能力,太阳光照射120 min后对Cr(VI)的去除率高达98.8%。     

Wavelet transforms in separation science for denoising and peak overlap detection

Wavelet transform is a versatile time‐frequency analysis technique, which allows localization of useful signals in time or space and separates them from noise. The detector output from any analytical instrument is mathematically equivalent to a digital image. Signals obtained in chemical separations that vary in time (e.g., high‐performance liquid chromatography) or space (e.g., planar chromatography) are amenable to wavelet analysis. This article gives an overview of wavelet analysis, and graphically explains all the relevant concepts. Continuous wavelet transform and discrete wavelet transform concepts are pictorially explained along with their chromatographic applications. An example is shown for qualitative peak overlap detection in a noisy chromatogram using continuous wavelet transform. The concept of signal decomposition, denoising, and then signal reconstruction is graphically discussed for discrete wavelet transform. All the digital filters in chromatographic instruments used today potentially broaden and distort narrow peaks. Finally, a low signal‐to‐noise ratio chromatogram is denoised using the procedure. Significant gains (>tenfold) in signal‐to‐noise ratio are shown with wavelet analysis. Peaks that were not initially visible were recovered with good accuracy. Since discrete wavelet transform denoising analysis applies to any detector used in separation science, researchers should strongly consider using wavelets for their research.     

Removal of multi-metals from water using reusable pectin/cellulose microfibers composite beads

Pectin (Pec) and cellulose microfibers (CF) extracted from orange waste were combined to form composite beads with enhanced adsorption capacity. Such beads were extensively tested in the removal of multi-metal ions from water. A factorial design approach was conducted to establish the optimum conditions for adsorption of Cd(II), Cu(II), and Fe(II) on Pec-CF beads. Batch adsorption experiments revealed that removal efficiency of such metal ions falls in the range of 94–58% and it followed the order Fe(II) > Cu(II) > Cd(II). The maximum Cd(II), Cu(II) and Fe(II) adsorption capacities calculated from the Langmuir isotherm were 192.3, 88.5 and 98.0 mg/g, respectively. FTIR analysis suggests that the functional groups on Pec-CF beads (binding sites) favor the adsorption of such metal ions. Desorption and reuse experiments demonstrated the beads could be used for at least five consecutive adsorption/desorption cycles. Our finds suggest the Pec-CF beads can serve as an efficient adsorbent for the removal of multi-metal ions from wastewater.