Biocatalytic synthesis of polymers. III. Formation of a high molecular weight polyester through limitation of hydrolysis by enzyme-bound water and through equilibrium control

Enzyme-catalyzed preparation of polymers offers several potentially valuable advantages over the usual polymerization procedures and has been studied for several years. A significant limitation on the polyesters prepared to date has been the low molecular weights achieved. The present studies have established that, in the polycondensation of bis(2,2,2-trifluoroethyl) glutarate with 1,4-butanediol using porcine pancreatic lipase as the catalyst, this limitation arises from at least two sources: hydrolysis of activated ester end groups by water introduced along with the enzyme and the polymerization's reaching equilibrium despite using the poorly nucleophilic 2,2,2-trifluoroethanol as the leaving group. Evidence is also developed that the presence of trifluoroethanol accelerates the release of the enzyme-bound water which hydrolyzes the activated ester end groups. The hydrolysis could be avoided by choosing a relatively high-boiling solvent, such as bis(2-ethoxyethyl) ether, then removing the trifluoroethanol by placing the reaction mixture under vacuum periodically or by drying the enzyme rigorously. The vacuum method also removed the limitation on molecular weight resulting from the reaction's reaching equilibrium. A further improvement in the molecular weight to nearly 40,000 daltons, well within the range that is technically interesting, was achieved by using 1,2-dimethoxybenzene or 1,3-dimethoxybenzene as the polymerization solvent. © 1995 John Wiley & Sons, Inc.     

Progress in the realisation of an autonomous environmental monitoring device for ammonia

Progress in the development of a micro-fluidic system for colorimetric monitoring of ammonia in drinking and wastewater is described. The ultimate goal is to have a miniaturised instrument that can produce accurate, reliable measurements, is easy to operate, has minimal power consumption, and can operate autonomously for a year. In this study, the indophenol reaction is incorporated into a simple, reliable analytical micro-fluidic system. Absorbance measurements for the blue ammonia-indophenol complex formed in the micro-fluidic system are shown. A key issue is the limiting stability of hypochlorite, a reagent used in the assay. The effects of hypochlorite concentration and impurities on the stability of hypochlorite are investigated and discussed. Decomposition is shown to be very dependent on the presence of heavy-metal impurities. With low levels of these catalytic metals and careful storage, hypochlorite has been shown to be stable for over a year.     

热处理及与KOH共炭化对深度脱除煤中无机矿物质的促进作用

研究了煤经热处理（炭化）以及煤与ＫＯＨ共炭化对酸洗脱灰的影响。结果表明，煤经炭化再用盐酸洗涤，可以在缓和的条件下大幅度提高酸洗脱灰率；煤与ＫＯＨ共炭化后再酸洗，不仅对煤中的粘土、黄铁矿等无机矿物质有很好的效果，还特别适于脱除在一般情况下都难以除去的石英矿物。     

Electron beam induced purification of dilute off gases from industrial processes and automobile tunnels

The electron beam process has proved to be an efficient method for the removal of inorganic pollutants from flue gas. Since it simulates natural processes which occur in the atmospheric photochemistry, it appeared attractive to investigate the potential of the e-beam process to clean off-gases which contain hydrocarbon and inorganic trace components. Such emissions arise from industrial processes and from automobile tunnels. Commercial solvents were vaporized in air and irradiated with energetic electrons (300 keV). CO, CO₂ and aerosol particles were found as products and were determined quantitatively. The aerosol particles can be collected by a gravel bed filter and can be removed by combustion or biological degradation. From experiments and model calculations it was found that the e-beam process is a very economic tool to remove hydrocarbons from large off-gas volumes at initial concentrations of 50–100 mg C/m³, and that NO_x can be removed very efficiently from tunnel off-gas.     

Fluoride and lead adsorption on carbon nanotubes

The properties and applications of CNT have been studied extensively since Iijima discovered them in 1991[1,2]. They have exceptional mechanical properties and unique electrical property, highly chemical stability and large specific surface area. Thus far, they have widely potential applications in many fields. They can be used as reinforcing materials in composites[3], field emissions[4], hydrogen storage[5], nanoelectronic components[6], catalyst supports[7], adsorption material and so on.…     

DeNOx催化剂FeZSM-5/Raney Fe的制备

用原位晶化法合成了FeZSM-5/RFe(RFeRaney Fe)催化剂. 合成液的组成为5Na2O*100SiO2*10TPABr*7 000H2O,pH＞11.5. 合成液中不含Al,ZSM-5分子筛的骨架Al只来源于Raney Fe的表面. 此法提高了ZSM-5分子筛中骨架Al的稳定性和分子筛上Fe离子的负载量. FeZSM-5/RFe用作DeNOx催化剂时具有较高的活性和水热稳定性.     

The Direct Electrochemical Oxidation of Ammonia in Propylene Carbonate: A Generic Approach to Amperometric Gas Sensors

The direct electrochemical oxidation of ammonia in propylene carbonate is reported for the first time. The voltammetric responses at glassy carbon, boron‐doped diamond, edge and basal plane pyrolytic graphite electrodes are explored and compared with the outcome indicating that the optimum electrode substrate for analytical purposes in this solvent is glassy carbon. Proof‐of‐concept is shown for the amperometric detection of ammonia using basal plane pyrolytic graphite electrodes abrasively modified with glassy carbon spheres. Given the significantly lower vapor pressure of propylene carbonate in comparison to water the implications for extending the life‐time of practical sensors are evident. Propylene carbonate shows a wide potential window with glassy carbon electrodes permitting this approach to be used for a potential diversity of gaseous analytes.     

Growth inhibition in animal cell culture

Eight independent cell lines accumulated ammonia in culture to concentrations between 1.3 and 2.9 mM. The growth inhibition of such concentrations of ammonium chloride when added to culture medium was variable. The cell lines tested could be divided into 3 groups depending on their growth response to 2 mM added NH4Cl. In the first group (293, HDF, Vero, and PQXB1/2) little (less than 14%) or no growth inhibition occurred. In the second group (McCoy and MDCK) a reduction in final cell yield of 50-60% was observed. The third group (HeLa and BHK) was most sensitive to the effects of NH4Cl with growth inhibition (greater than 75%) compared to controls. The growth inhibitory effect of added lactate up to 20 mM was negligible (less than 10%) for 3 cell lines, although one cell line (PQXB1/2) showed greater sensitivity. The interactive effects of ammonia and lactate were determined in a matrix experiment. At lactate (greater than 12 mM) and ammonia (1-4 mM), the growth inhibitory effects of the two components were synergistic. However, at low concentrations of lactate (less than 12 mM) the toxic effect of ammonia was reduced. A proposed mechanism for the sparing effect of lactate on ammonia toxicity is discussed. This may have importance in developing strategies for the optimal growth of ammonia-sensitive cell lines.     

Blood cell separation using crosslinkable copolymers containing N,N‐dimethylacrylamide

Amphiphilic copolymers using hydrophilic N,N‐dimethylacrylamide (DMA), hydrophobic methyl methacrylate (MMA) and a crosslinkable monomer, 3‐methacryloyloxypropyl trimethoxysilane (MTSi), were synthesized and evaluated as coating materials for leukocyte removal filters for whole blood. When filters composed of non‐woven fabrics were coated with crosslinked synthesized copolymers, the elution ratios of the copolymers to water were adequately low because of the crosslinking with trimethoxysilane groups of MTSi units in the copolymers. Filters coated with crosslinked poly(DMA‐co‐MTSi) having a 0.96 mole fraction of DMA units showed a 0.35 ± 0.44% platelet permeation ratio and a logarithmic reduction of 4.0 ± 0.68 for leukocytes. On the other hand, an increase in the content of MMA units in the DMA‐containing copolymers improved the permeation ratio of the platelets dramatically. Filters coated with crosslinked poly(DMA‐co‐MMA‐co‐MTSi) containing a 0.39 mole fraction of MMA units and a 0.58 mole fraction of DMA units showed an 86 ± 3.0% platelet permeation ratio and a logarithmic reduction of 2.1 ± 1.2 for leukocytes. This indicates that an adequate content of hydrophobic monomer units, such as MMA units, is necessary for effective platelet permeation. Copyright © 2007 John Wiley & Sons, Ltd.     

Polypyrrole-based sensor for hydrazine and ammonia

An ultra-thin layer of polypyrrole can be coated on non-conducting substrates, e.g., acrylic, by dip coating into a colloidal suspension of polypyrrole. This thin coating reversibly combines with low concentrations of ammonia or hydrazine with a concomitant reversible increase in resistance; 0.1 μg cm^?3 of ammonia can readily be detected with a 1 cm² area of sensor.