Radical grafting from carbon fiber surface: graft polymerization of vinyl monomers initiated by azo groups introduced onto the surface

This paper describes the radical graft polymerizations of vinyl monomers from carbon fiber surface initiated by azo groups introduced onto the fiber surface. The carbon fiber used in this experiment was the polyacrylonitrile type. The introduction of azo groups onto the carbon fiber surface was achieved by the reaction of 4,4'-azobis (4-cyanopentanoic acid) with isocyanate groups which were previously attached onto the surface by the treatment of the fiber with tolylene 2,4-diisocyanate. The amount of surface azo groups introduced onto nitric acid-treated carbon fiber was determined to be 0.60 x 10^-5 mol 9^-1 by nitrogen analysis. The radical graft polymerization of methyl methacrylate (MMA) was tried. Though the thermal polymerization of MMA proceeded slightly in the absence or in the presence of untreated carbon fiber, the rate of the polymerization was considerably low. In contrast, the graft polymerization of MMA was initiated in the presence of the carbon fiber having surface azo groups, and part of resultant poly(MMA) grafted onto the surface. The percentage of grafting increased with an increase in polymerization time and reached 42.8% after 24 h. The graft polymerizations of other monomers, such as styrene, vinyl acetate, and acrylic acid, were also initiated by the surface azo groups attached onto the carbon fiber, and the corresponding polymer effectively grafted onto the surface.     

Copolymerization with the feeding of one of the comonomers: Cationic activated monomer copolymerization of ε‐caprolactone with ethylene oxide

The cationic copolymerization of ε‐caprolactone with ethylene oxide (EO) under the conditions of activated monomer polymerization, that is, with a low‐molecular‐weight diol as an initiator and BF₃ etherate as a catalyst, was studied. To ensure the uniform composition of the resulting copolymers (telechelic oligodiols), the copolymerization was conducted with incremental feeding of the EO comonomer, which was more reactive in the cationic process. ¹H NMR analysis of samples isolated at different stages of the copolymerization indicated that the average composition of the copolymer was indeed nearly constant over the course of the copolymerization. Matrix‐assisted laser desorption/ionization time‐of‐flight spectra of the products revealed, however, that for the same degree of polymerization, macromolecules containing different numbers of EO units were present. The observed distribution was compared with the distribution simulated under the assumption that the probability of incorporating a given unit depended only on the feed composition (nearly constant during the copolymerization). With this assumption, a good agreement between the observed and simulated spectra was obtained. This indicated that, even when the optimum conditions for the formation of a uniform copolymer were created, the individual macromolecules differed in composition because of the statistical character of the copolymerization. The results of differential scanning calorimetry analysis were compatible with such a conclusion; two melting peaks appeared on differential scanning calorimetry curves when a sample was heated immediately after fast cooling, and this may indicate the presence of different types of crystallites. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 3788–3796, 2005     

辐射增强PP／BR共混体系的力学性能

研究了在多官能团单体－三烯丙基异氰酸酯存在下，共混体系聚丙烯／１．４－聚丁二烯橡胶的辐射效应，用ＤＳＣ，动态粘弹谱对其进行表征。结果显示，三烯丙基异氰酸酯主要分布于聚丙烯／１．４－聚丁二烯橡胶共混物的界面自高能射线作用下，被引发参与界面反应，从而改善了共混体系的相容性，增强也界面粘接，提高了共混物的力学性能。     

Forty years of Umpolung in organometallic chemistry: from carbanionic nucleophiles to metallic electrophiles

The evolution of mechanistic insight into the nature of organometallic reactions over the last forty years is recounted from the personal perspective of a chemist trained in the empirical tradition of organometallic chemistry. Starting from the viewpoint prevailing in the 1950s of organometallics as potential carbanionic nucleophiles, this investigator has become persuaded by his researches with Group 13 organometallics of the merits of treating these reagents as organometallic electrophiles. The profound effects that a tricoordinate boron center can exert on the structure and reactivity of boracyclopolyenes is a telling illustration of such boron electrophilicity operating in an intramolecular fashion. The elucidation of the mechanisms of both the carbalumination and the hydroalumination of olefins and acetylenes has adduced cogent evidence for the rate-determining step being the electrophilic attack of tricoordinate aluminum on the carbon-carbon π-electron cloud of the substrate. Finally, in an investigation of the molecular basis for Ziegler-Natta catalysis, the Breslow-Natta soluble catalyst for the polymerization of ethylene, Cp₂TiCl₂-R_nAlCl_3−n, was examined in detail and compelling evidence has been adduced that the active catalyst site is the solvent-separated ion-pair, [Cp₂TiR]⁺ [R_nAlCl_4−n]⁻.. Here again, the polymerization reaction is initiated by an organometallic electrophile, indeed by an even more powerful cationic electrophile. The net effect of these studies has been an Umpolung in the manner with which this chemist and many of his colleagues view organometallic reaction mechanisms.     

Synthesis and characterization of novel fluoride‐releasing monomers. II. Dimethacrylates containing bis(aminodiacetic acid) and their ternary zirconium fluoride complexes

Novel dimethacrylate monomers containing bis(aminodiacetic acid) chelating ligands with or without additional hydroxyl groups were synthesized, starting from 2,2‐bis(4‐hydroxy‐3‐methylphenyl)propane. The structures of the monomers were characterized by electrospray mass spectrometry (ESMS), ¹H NMR, and ¹³C NMR. The structures and relative stability of fluoride‐releasing monomers containing one or more ternary zirconium fluoride complex moieties were studied by ESMS. The most stable ternary zirconium fluoride complex was in the form of [LZrF]^?, where H₄L is the monomer containing bis(aminodiacetic acid) without additional hydroxyl groups. The synthesized monomer was photopolymerized with camphorquinone and 1‐phenyl‐1,2‐propane‐dione as initiators and N,N‐dimethylaminoethyl methacrylate as the accelerator. The fluoride release, fluoride recharge, compressive strength, and flexure strength were tested on the experimental dental composite containing 13.7 wt % synthesized monomer and three commercial flowable dental composites. The results showed that the experimental composite has significantly higher fluoride release and recharge capabilities than the commercial flowable composites. The compressive strength was comparable to that of the commercial materials. The water sorption and solubility met the requirement of the ISO Specification 4049. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 3153–3166, 2005     

由对苯二酚合成2,5—二甲氧基对苯二苄氯锍盐

以对苯二酚为基本原料，通过改进的甲氧基化、氯甲基化、锍化３个反应合成，得到（２，５－二甲氧基对苯乙炔）单体双锍盐２，５－二甲氧基对苯二苄氯锍盐，且产率达８４％，并对每步反应的合成条件及原因进行了解释，运用色谱／质谱联用仪和核磁共振仪对每步产物进行了表征     

Conductivity and dielectric properties of the monomer and polymer of the bis(p-toluene sulfonate) of 2,4-hexadiyne-1,6-diol

The electrical conductivity of single crystals of the bis(p-toluene sulfonate) of 2,4-hexadiyne-1,6-diol (TS) and its polymer (PTS) was measured in a temperature range 77–373 K (to 353 K for TS), dielectric properties were measured from 123 to 283 K. Anomalies of the conductivity and the real part of the complex dielectric permittivity of TS and PTS along the molecular stacking direction at the temperature corresponding to the low-temperature phase transitions were observed. The dependence of phase transitions on the polymerization conversion of the monomer TS was examined. The phase diagram of the TS-PTS mixed system was constructed.     

Synthesis of Al–Cr decagonal quasicrystal nanoparticles and their temperature of phase transformation to stable crystal phase

The synthesis of Al–Cr single quasicrystal (QC) nanoparticles of the decagonal phase was achieved by introducing an advanced gas flow evaporation method. By obtaining successive electron diffraction patterns for single-QC nanoparticles, the phase transformation temperature of a single-QC nanoparticle was determined to be 700 °C. It was also determined that part of the QC nanoparticle decomposed into hex-Al₈Cr₅ and Al during the phase transformation. Since the grain growth did not occur during the phase transformation in the present experiment, the inherent phase transformation temperature could be measured.     

Growth of Ni-Al alloys on Ni(1 1 1): (I) Formation of epitaxial Ni3Al from ultra-thin Al deposits

In this paper we describe the alloying process of ultra-thin Al layers (below 8 × 10¹⁵ Al/cm²) deposited on Ni(1 1 1). For this purpose Auger electron spectroscopy, low energy electron diffraction, and ion beam analysis-channelling measurements have been performed in situ in an ultra-high vacuum chamber. Al deposits formed at low temperature (about 130 K) are strained defective crystalline layers retaining the substrate orientation. Alloying takes place, with very progressive Ni enrichment, in a very broad temperature range between 250 K and 570 K. This feature shows that diffusion of the alloy species is more and more difficult when the Ni concentration increases. At 570 K a crystallographically and chemically ordered Ni₃Al phase is formed, and its order continuously improves upon annealing, up to 750 K. We have shown by ion beam methods that this alloy is three-dimensional, extending up to 16 (1 1 1) planes for the thickest deposits. The Ni₃Al phase can also be obtained directly by Al deposition at 750 K, but its crystalline quality is lower and the layer is probably formed of grains elongated along 〈1 1 −2〉 directions. The Al content of the thin Ni₃Al layers formed mostly dissolves in the bulk above 800 K. However a small amount of Al remains segregated at the Ni crystal surface.