An Al(OTf)3-catalyzed environmentally benign process for the propargylation of indoles

Al(OTf)₃ catalyzed the alkylation of indoles using secondary/tertiary propargylic alcohols to produce 3-propargylated indoles in excellent yields with high selectivity. The reactions were performed in air with commercial grade solvents, and water was the only side product of the process. The catalyst was recovered after completion of the reaction and re-used with minimum loss of activity over three cycles.     

Facile fabrication of superhydrophobic surface with micro/nanoscale binary structures on aluminum substrate

The present work reports a simple method to produce the aluminum superhydrophobic surface based on an interface reaction between an aluminum foil and zinc aqueous solution. The products were characterized by field-emission scanning electron microscopy, X-ray powder diffraction and X-ray photoelectron spectrum. The field-emission scanning electron microscopy images show that the coating surface is composed of micro/nanoscale binary structure, which is similar to the structure of lotus leaf. The wettability of the coating surface was also investigated. It was found that after treatment with stearic acid, the wettability of the aluminum foil changed from superhydrophilic to water-repellent superhydrophobic. The complex micro/nanoscale binary structures along with the low surface energy lead to the high surface superhydrophobicity.     

Characterization of microstructures induced in the workpiece of aluminum alloy by excimer laser micromachining

Excimer laser emitting at 248 nm is applied to produce microstructures on the surface of aluminum alloy. The surface morphology shows that hotspots and thermal fluidic structures both come to light. Two possible mechanisms of hotspots formation are proposed: near-field diffraction and interference, and extremely fast rapid thermal annealing. And for the formation of thermal fluidic pattern structure, a thin film model is applied.     

Effects of controllable process factors on Al rear surface bumps in Si solar cells

High efficiency solar cells require good back surface field passivation and high back reflectance in the rear Al region. In module processes, wafer-based solar cell can break through stress during soldering uneven rear aluminum surfaces - a serious problem that affects throughput. This work examined rear surfaces with respect to controllable process factors such as ramping and cooling rates during rapid thermal processing, and the fineness of aluminum powder used in the screen-printed paste. A faster ramp up rate resulted in a uniform temperature gradient between the aluminum and silicon surfaces. As a results, the bumps on the aluminum surface were small and of high density. Fine aluminum metal powder in the paste for screen-printing contact points resulted in large distribution, high density bumps. Bumps formed during cooling in metallization, their sizes and densities were dependent the on uniformity of the aluminum and silicon liquid wetting of the silicon surface.     

Correlation between formation conditions and breakdown voltage of anodic oxide films on aluminum

Two series of samples were investigated: a) aluminum films with a sublayer of tantalum; b) industrial aluminum alloys AMg-2m; D16; AMc; AD-1n. The optimum composition of re-anodizing electrolyte was chosen on the basis of a solution of citric acid and ethylene glycol. The results of investigations of the sparking voltage at re-anodizing for various aluminum alloys and thicknesses of primary porous oxide are presented. The analytical dependence of breakdown voltage value on forming voltage value for alloy AD-1n was obtained. The original design of re-anodizing cell allowing increase of the sparking voltage was developed.     

The response of thermally and optically stimulated luminescence from Al2O3:C to high-energy heavy charged particles

The thermoluminescence (TL) and optically stimulated luminescence (OSL) response of Al₂O₃ dosimeters to high-energy heavy charged particles (HCP) has been studied using the heavy ion medical accelarator at Chiba, Japan. The samples were Al₂O₃ single-crystal chips, of the type usually known as TLD-500, and Luxel^TM dosimeters (Al₂O₃:C powder in plastic) from Landauer Inc. The samples were exposed to ⁴He (150 MeV/u), ¹²C (400 MeV/u), ²⁸Si (490 MeV/u) and ⁵⁶Fe (500 MeV/u) ions, with linear energy transfer values covering the range from 2.26 to 189 keV/μm in water and doses from 1 to 100 mGy (to water). A ⁹⁰Sr/⁹⁰Y beta source, calibrated against a ⁶⁰Co secondary standard, was used for calibration purposes. For OSL, we used both continuous-wave OSL measurements (CW-OSL, using green light stimulation at 525 nm) and pulsed OSL measurements (POSL, using 532 nm stimulation from a Nd:YAG Q-switched laser). The efficiencies (η_HCP,γ) of the different HCPs at producing OSL or TL were observed to depend not only upon the linear energy transfer (LET) of the HCP, but also upon the sample type (single crystal chip or Luxel^TM) and the luminescence method used to define the signal—i.e. TL, CW-OSL initial intensity, CW-OSL total area, or POSL. Observed changes in shape of the decay curve lead to potential methods for extracting LET information of unknown radiation fields. A discussion of the results is given, including the potential use of OSL from Al₂O₃ in the areas of space radiation dosimetry and radiation oncology.     

The synthesis of symmetrical bis-1,2,5-thiadiazole ligands

We have been engaged in a search for coordination catalysts for the copolymerization of polar monomers (such as vinyl chloride and vinyl acetate) with ethylene. We have been investigating complexes of late transition metals with heterocyclic ligands. In this report we describe the synthesis of a symmetrical bis-thiadiazole. We have characterized one of the intermediates using single crystal X-ray diffraction. Several unsuccessful approaches toward 1 are also described, which shed light on some of the unique chemistry of thiadiazoles.     

Unexpected reactivity between aromatic nitro compounds and PCl3/AlCl3. A new one-pot synthesis of phenazines

The reaction between 4-nitroalkoxybenzenes 7 and PCl₃/AlCl₃, when carried out in appropriate molar ratio, gives a prevalent formation of diazenes 8 and 2,7-dialkoxyphenazines 9 with their new chlorinated derivatives 10-13. These compounds are obtained, in satisfactory yield, in a one-pot procedure, in mild conditions, from commercially available and safe starting materials. In this reaction both the reagents PCl₃ and AlCl₃ play a fundamental role in obtaining the products, and this method might be applicable to other 4-alkoxynitrobenzenes.     

Nanoindentation and the indentation size effect: Kinetics of deformation and strain gradient plasticity

A study of the indentation size effect (ISE) in aluminum and alpha brass is presented. The study employs rate effects to examine the fundamental mechanisms responsible for the ISE. These rate effects are characterized in terms of the rate sensitivity of the hardness, , where H is the hardness and is an effective strain rate in the plastic volume beneath the indenter. can be measured using indentation creep, load relaxation, or rate change experiments. The activation volume V∗, calculated based on which can traditionally be used to compare rate sensitivity data from a hardness test to conventional uniaxial testing, is calculated. Using materials with different stacking fault energy and specimens with different levels of work hardening, we demonstrate how increasing the dislocation density affects V∗; these effects may be taken as a kinetic signature of dislocation strengthening mechanisms. We noticed both H and exhibit an ISE. The course of V∗ vs. H as a result of the ISE is consistent with the course of testing specimens with different level of work hardening. This result was observed in both materials. This suggests that a dislocation mechanism is responsible for the ISE. When the results are fitted to a strain gradient plasticity model, the data at deep indents (microhardness and large nanoindentation) exhibit a straight-line behavior closely identical to literature data. However, for shallow indents (nanoindentation data), the slope of the line severely changes, decreasing by a factor of 10, resulting in a “bilinear behavior”.