Synthesis and characterization of 9,9‐bis(4‐hydroxyphenyl and 4‐aminophenyl)dibenzofluorenes: Novel fluorene‐based monomers

Two novel 9,9‐difunctionalized fluorene‐type monomers, 9,9‐bis(4‐hydroxyphenyl‐ and 4‐aminophenyl)‐2,3:6,7‐dibenzofluorenes, are synthesized by the reaction of dibenzenzofluorenone with phenol and aniline. These monomers are used for the preparation of polyester and polyimide as the typical polymers to evaluate the property change such as thermal stability caused by the benzene rings fused to the fluorene skeleton with keeping good solubility, in comparison with the polymers derived from simple fluorenone. In fact, these two new polymers have the fairly enhanced thermal stability and refractive index value along with satisfactory solubility in organic solvents, enough to emphasize the fusion effect. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 2602–2605     

Adsorption of CO gas molecules on zigzag BN/AlN nanoribbons for nano sensor applications

First-principle calculations have been performed to study the sensing of CO gas in various considered configurations. The adsorption of CO on zigzag BN nanoribbon (ZBNNR) and zigzag AlN nanoribbon (ZAlNNR) was modelled in five different possibilities. The effect of CO adsorption is to reduce the band gap in both types (BN/AlN) of the nanoribbons. Interestingly, a finite magnetic moment (0.96 ${\mu }_B$ for ZBNNR and 0.69 ${\mu }_B$ for ZAlNNR) has been obtained which depends upon the adsorption configuration of CO. Half-metallicity was also observed upon selective CO adsorption on ZAlNNR irrespective of the ribbon width. Present findings suggest that CO gas molecules could be detected through adsorption on BN/AlN nanoribbons via changes in electronic and/or magnetic properties.     

Palladium complexes bearing an N‐heterocyclic carbene–sulfonamide ligand for cooligomerization of ethylene and polar monomers

Herein, we report the synthesis of palladium complexes bearing an N‐heterocyclic carbene (NHC)‐sulfonamide bidentate ligand and their application in ethylene oligomerization and ethylene/polar monomer cooligomerization. These catalysts could smoothly catalyze ethylene oligomerization and ethylene/methyl acrylate cooligomerization albeit the performance was lower compared to that of a NHC–phenoxide catalyst. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 474–477     

A facile route to germanium(IV) binaphthoxide complexes: crystal structure of a chiral resolved germanium(IV) binaphthoxide

A method for the facile synthesis of chiral germanium(IV) binaphthoxide complexes from the corresponding binaphthols and an organogermanium trichloride has been developed, which allows these unusual types of compounds to be synthesized in high yields. The crystal structure of one such complex, (S)-[Ge{O2C20H10(SiMe3)2-3,3'}{Cl}{Ph}], has been determined.     

Radical polymerization in the presence of peroxide and reducing agent monomer for branched polymers

In this article, we report the radical polymerization in the presence of peroxide and commercially available or designed reducing agent monomer (RAM) for the preparation of branched poly(methyl methacrylate)s (PMMAs). The reaction behavior of the RAM was studied by NMR. Triple‐detection SEC (TD‐SEC) analysis was used to confirm the branching structure of the prepared PMMAs and to investigate the influence of peroxide concentration and RAM concentration on molecular weight and branched structure. The obtained branched PMMAs exhibited high molecular weights and relatively narrow polydispersities at high conversion of MMA. Interestingly, a significant increase in molecular weight and degree of branching of the obtained polymers are observed in higher BPO concentration, these results are quite different from that reported in the literature. The unique radical polymerization mechanism in the RAM/BPO redox‐initiated radical polymerization system resulted in branched PMMAs with high molecular weights at relatively high RAM and BPO concentrations. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 833–840     

Rational design of methacrylate monomers containing oxadiazole moieties for single‐layer organic light emitting devices

Methacrylate derived monomers functionalized with pendant oxadiazole moieties were synthesized and copolymerized with carbazole containing monomers to form polymers with electron and hole transporting fragments in the same molecule. Substituents on the oxidazole moiety were varied with the purpose of bandgap tuning and performance optimization when employed in single‐layer organic light emitting devices (OLED). Quantum mechanical calculations of the HOMO‐LUMO levels of the oxidazole derivatives were used to down‐select promising candidates for chemical synthesis and testing in single‐layer OLEDs. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2015 , 53, 1663–1673     

Visual detection of Al ions using conjugated copolymer-ATP supramolecular complex

A colorimetric Al³⁺ sensor based on fluorescence recovery of a conjugated copolymer-ATP complex is proposed. An optimized ratio of two polythiophene (PT) monomers is utilized to synthesize copolymer (CP) that yielded maximized colorimetric response for Al³⁺ in deionized (DI) and tap water. The electrostatic disassembly of CP-ATP upon addition of Al³⁺ led to an evident visual color change. The lowest concentration of Al³⁺ for naked eye observation is around 4 μM, which is below the threshold levels in drinking water according to European Economic Community (EEC) standard. Besides, the proposed assay showed a similar response to Al³⁺ in tap water. The proposed methodology showed selective and sensitive detection for Al³⁺ in analytically relevant concentration ranges without involving sophisticated instrumentation, illustrating the applicability for on-site drinking water monitoring.     

Effect of cooling rate on microstructure of friction-stir welded AA1100 aluminum alloy

In this work, the microstructural changes occurring during cooling of friction-stir welded aluminum alloy AA1100 were evaluated. To this end, friction-stir welding (FSW) was performed in a wide range of cooling rates of 20–62 K/s and the evolved microstructures were studied by using electron backscatter diffraction. Below 0.6 T_m (T_m being the melting point), the stir zone material was found to experience no significant changes during cooling. At higher FSW temperatures, however, notable changes occurred in the welded material, including grain growth, sharpening of texture, reduction of the fraction of high-angle boundaries and material softening.     

Synthesis of New Poly(biphenylene oxide) with Pendent Trifluoromethyl Group

A new AB type of monomer 4′-fluoro-3,5-dimethyl-3′-trifluoromethyl-biphenyl-4-ol has been synthesized that leads to a new poly(arylene ether) by self polycondensation reaction. The monomer and the polymer have been well characterized by elemental analyses, FT-IR and NMR spectroscopy. Both FT-IR and NMR spectra of the polymers did not show any terminal phenoxy group indicating high conversion. The polymer showed glass transition at 278°C and very good thermal stability in synthetic air. GPC results indicate high molar mass development; Mw = 53200 and MWD = 2.29.