Fluorimetric determination of aluminium in water by sequential injection through column extraction

A fluorimetric procedure for the determination of aluminium with matrix removal in drinking water is proposed. The system is based both on the solid phase extraction of aluminium on a new chelating resin (XAD-4 modified by grafting salicylic acid) and the fluorimetric detection of a complex formed between 8-hydroxyquinoline-5-sulfonic acid (HQS) and Al(III), after elution of the resin by hydrochloric acid. The sorption and elution of aluminium were studied in both competitive and non-competitive conditions, varying pH, flow-rates, volume and concentration of reagents, as well as time contact. The optimised procedure allows determination of Al³⁺ at the sub-ppb level (LOD: 0.2 g L^–1 for 1 ml of sample) within a working range of 0.2–500 g L^–1. The analytical procedure was successfully employed for the determination of aluminium in drinking water during and after flocculation/coagulation treatment processes.     

Microscopic phenomena found within enclosed surface laser ablation of 20 nm thick aluminium films

This paper investigates the microscopic features which occur when a four-layered film is ablated using Q-switched Nd:YAG laser. The four-layered films consist of a vacuum-deposited aluminium layer (0.02 μm) upon an oriented polypropylene (OPP) film (30 μm) which has been laminated using an inert adhesive and a second OPP film. Laser radiation is absorbed principally by the aluminium layer, melting and/or vaporising it. Upon cooling, the aluminium layer is rearranged into discrete microscopic particles, which give laser-treated areas of the film a transparent appearance. Within the films are found microscopic features, which can be divided into three distinct types: aluminium demetallisation features, polymer distortion features and particle features. Features from each of these categories can exist within a single laser track depending upon the laser parameters used for transparentisation.     

Origination of In‐Phase Oscillations of Thin Plates with Aeroelastic Interaction

Synchronization of oscillations of thin elastic plates that are walls of a gasfilled channel is considered. The gas motion is described by a system of Navier–Stokes equations, which is solved using the secondorder MacCormack method with time splitting. The motion of the channel walls is described by a system of geometrically nonlinear dynamic equations of the theory of this plates, which is solved by the finitedifference method. Kinematic and dynamic contact conditions are imposed at the interface between the media. A numerical experiment is performed to determine typical dynamic regimes and study the transition of the aeroelastic system to inphase oscillations.     

Feigenbaum Scenario Exhibited by Thin Plate Dynamics

The dimensionless partial differential equations governing thedynamics of a thin flexible isotropic plate with an external load arederived and investigated. The period doubling bifurcations, as well asthe chaotic dynamics, are detected and analyzed. The algorithms leadingto the reduction of the original equations to those of a difference setof ordinary differential and algebraic equations are proposed, comparedto other known methods, and then applied to the problem.Among others, it is shown that, in spite of the system complexity, theFeigenbaum scenario exhibited by one-dimensional maps also governs theroute to chaos in the continuous system under consideration.     

Approximation and Reconstruction of the Electrostatic Field in Wire–Plate Precipitators by a Low-Order Model

The numerical computation of the ionic space charge and electric field produced by corona discharge in a wire–plate electrostatic precipitator (ESP) is considered. The electrostatic problem is defined by a reduced set of the Maxwell equations. Since self-consistent conditions at the wire and at the plate cannot be specified a priori, a time-consuming iterative numerical procedure is required. The efficiency of all numerical solvers of the reduced Maxwell equations depends in particular on the accuracy of the initial guess solution. The objectives of this work are two: first, we propose a semianalytical technique based on the Karhunen–Loève (KL) decomposition of the current density field J, which can significantly improve the performance of a numerical solver; second, we devise a procedure to reconstruct the complete electric field from a given J. The approximate solution of the current density field is based on the derivation of an analytical approximation , which, added to a linear combination of few KL basis functions, constitutes an accurate approximation of J. In the first place, this result is useful for optimization procedures of the current density field, which involve the computation of many different configurations. Second, we show that from the current density field we can obtain an accurate estimate for the complete electrostatic field which can be used to speed up the convergence of the iterative procedure of standard numerical solvers.     

物光的偏振性对全息记录质量的影响

通过对菲涅耳三维漫反射全息记录光路中物光与参考光偏振状态的实验检测，发现线偏振的激光被不同表面材料的物体散射和漫反射后变成“部分偏振光”，几乎所有目标物都有显著的消偏振现象，全息干板上实际记录的是线偏振的参考光与“部分偏振”的物光形成的相干度较低的干涉条纹。物光偏振度的大幅度下降影响干涉条纹的衬比度，并增加全息图的噪声。给出实验方案和检测光路，采用在参考光路中插入1/4波片的方法，可充分利用非偏振物光各个振动方向的光能，提高条纹的衬比度。     

Measurement Accuracy in Phase-Shifting Point Diffraction Interferometer with Two Optical Fibers

A phase-shifting point diffraction interferometer (PS/PDI) with point sources of two single mode optical fibers has been developed, which will be appropriate for the surface figure measurement of large aperture optics on a sub-nanometer scale. To reduce the measurement error factors, a fiber optic plate (FOP) is used as a projection plane for interference pattern. Errors caused by imperfection of optical alignment, such as position of point sources and tilt of FOP, are minimized by analyzing the measured phase data with an original method. Measurement accuracy in the PS/ PDI is estimated with the interference pattern produced by the two optical fiber sources. If inhomogeneity of the FOP and a systematic error of the PS/PDI are eliminated, the measurement accuracy of the present system is estimated to be less than 4nm P-V and 0.7nm rms, respectively, at a measurement wavelength of 632.8 nm.     

高分辨率X射线显微成像及其进展

介绍了高分辨率X射线显微成像产生背景和发展过程，着重分析了基于光学元件波带片的放大成像的基本原理，并简述了高分辨率三维成像的有关理论。同时给出国内外高分辨率X射线显微成像研究的最新进展，展望了高分辨率X射线显微成像的应用前景。     

光强连续可调的圆偏振光衰减器

利用1/4波片及偏光棱镜,设计了光强连续可调的圆偏振光衰减器,通过该器件可获得偏振度高且光强连续可调的圆偏振光.该衰减器解决了632.8 nm多膜氦氖激光器出射光为非完全自然光且偏振面随时间做随机变化导致实验误差的问题,为偏光信息测试系统提供了相对稳定的激光光源.     

米散射理论在新型导光板中的应用

根据米散射理论,提出了新型导光板的设计思路,计算并分析了对于一定波长的入射光,不同粒径的微粒的散射特性。总结了随着微粒粒径的变化,散射效率、消光效率与背向散射效率的变化规律,分析了散射过程中的偏振度随粒子粒径几散射角变化的情况,同时模拟计算了多个微粒对同一波长的入射光经过多次散射后的概率统计结果。