ITER高温超导电流引线的高安全分流器研究

电流引线是室温电源电缆与低温磁体之间的电连接部件.高温超导材料在液氮温度下具有零电阻率和低热导率的特性,用它做成的电流引线可以大大减小低温系统的热负荷,从而减少制冷设备投资及系统运行费.高温超导电流引线可以分为阻性换热器段和高温超导段两部分(其中还包括各部件间的连接部分).高温超导段的分流器设计关系到冷端热负荷大小以及超导段失超后的安全问题.为了研究国际热核聚变试验堆(ITER)电流引线高安全性能,专门设计、试验了68kA引线的1/90实验样品.本文通过对比全CuBe(cu-2%Be)分流器、全不锈钢分流器和二元分流器的失冷故障(LOFA)实验结果,证明二元分流器能够克服安全性和冷端漏热矛盾,可以满足ITER高安全性的要求.     

基于Geant 4的介质深层充电电场计算

基于Geant4模拟了电子在Teflon介质中的电荷输运过程,获得了其内部的电流密度、剂量率和电荷沉积量沿深度的分布曲线,进而利用电荷连续性方程、泊松方程和深层俘获方程求解出Teflon中高能量、小束流电子辐照下的电场分布. 将介质平板充电过程简化为屏蔽铝板与分层介质组成的Geant4模型,电子源为1.0MeV,0.1pA/cm²的平面源. 通过记录经过各层介质的电子电量和各层介质内沉积能量和电子数目,用统计平均的方法获得了介质内电流密度、剂量率和电荷沉积量沿深度的分布规律. 介质内 关键词： 卫星 介质深层充电 Geant4 电场     

Study on the Relation Between Discharge Voltage and Magnetic Field Topography in a Hall Thruster Discharge Channel

The relation between magnetic field topography and operating voltage is investigated in a 1kW Hall thruster discharge channel in order to focus the ion beam effectively and optimize the performance. The curvature of magnetic field line (α) is introduced to characterize the differences of topologies. The optimized magnetic field distribution under each operating voltage is obtained by experiment. Through the curvature transformation, we find that the area of (α > 1) in the channel gradually decreases with the increase of the operating voltage. In response to the results above, two dimensional plasma flows are simulated employing Particle‐in‐Cell method. The distributions of the electric potential, ion density and ion radial velocity are calculated to understand the important influence of the relation above on ion beam focusing. The numerical results indicate that magnetic field curvature and thermal electric field control the ion beam in the ionization and acceleration zone, respectively. The magnetic field topography and discharge voltage interact with each other and together form the focusing electric field. The ion radial mobility is suppressed effectively and the ion beam is focused to the channel centerline. In addition, for a given voltages, when the area of (α > 1) is larger than the optimal scope, the electric potential lines excessively bend to the anode causing ion over focus; contrarily, the electric potential lines will bend to the exit and defocus ions. All these results suggest the relation between magnetic field topography and discharge voltage is important to the ion radial flow control and performance optimization of the Hall thruster (© 2009 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Description of the transport critical current density behavior of polycrystalline superconductors as a function of the applied magnetic field

A model to describe the critical current density behavior of high-T_c polycrystalline superconductors is proposed for all magnetic field values. The main features of the model are as follows: the transport critical current density is controlled by the weak-link network at grain boundaries. The size distribution of weak links is well represented by a Gamma-type distribution. Finally, the tunneling critical current between grains follows a Fraunhofer diffraction pattern or a modified pattern if the applied magnetic field is lower or higher than the first critical field H_c1.     

Superconducting characteristics of (Bi, Pb)-2223 single crystals with controlled oxygen-content

Critical current density was measured for oxygen-controlled (Bi, Pb)-2223 single crystals before and after the irradiation with gold ions in a magnetic field parallel to the irradiation-induced defects along the c-axis. Eleven specimens prepared in different annealing conditions were measured. The condensation energy density of each specimen was evaluated from the observed critical current density by using the summation theory of pinning forces of columnar defects and the flux creep theory. It was found that the specimen heat-treated at 1 atm in oxygen atmosphere has the highest condensation energy density among all specimens. Hence, it is speculated that the optimum oxygen pressure for the anneal is around 1 atm.     

考虑端面反射率的半导体光放大器增益特性研究

在考虑到端面反射率影响的前提下,从SOA载流子的速率方程和耦合波方程出发,建立了基于SOA的交叉增益调制波长变换理论模型,利用分段模型方法对影响增益特性的几个参数进行了数值模拟。结果发现,注入电流和有源区面积对SOA增益的影响有一个阈值,在阈值范围内,SOA增益的大小随着注入电流和有源区面积的增大而明显的增大,但是超过阈值时,则SOA增益趋向饱和。     

Scattering of an arbitrarily oriented dipole field by an infinite and a finite length PEMC circular cylinder

Electromagnetic scattering from an infinite and a finite length PEMC circular cylinder, illuminated by an arbitrarily oriented dipole, is investigated theoretically. An electric dipole as a source of excitation is considered first, and then a magnetic dipole as a source of excitation is treated. In contrast to the case of an axially directed dipole, it is shown that no additional terms are needed to incorporate the cross-polarized component of the field for the case of radial and circumferential dipoles. Numerical verifications are presented to verify the validity of derived results and numerical code by comparing results with the published literature.      

偏振光激发的Sr原子电偶极辐射

原子与激光场相互作用产生的自发辐射可以用经典电偶极辐射理论很好的描述.通过改变与Sr原子束相互作用激光的偏振方向,分析探测Sr原子束荧光强度的变化,测定了在远场区的电偶极辐射特性.Sr原子电偶极子在远场区辐射能量的空间方向分布满足sin2θ关系,利用这一规律可以有效地探测到最强的荧光光谱.     

引入电流负反馈后电路输出阻抗变化的测试难点及解决方案

引入电流负反馈会使放大电路的输出电阻变大,这种变化在实验测量时几乎没有出现。我们在分析原因后,提出了一种简单、易行的解决方案,并且对电路参数进行了合理化设计,使实验效果非常理想。