Review of chip-scale atomic clocks based on coherent population trapping

Research on chip-scale atomic clocks （CSACs） based on coherent population trapping （CPT） is reviewed. The back- ground and the inspiration for the research are described, including the important schemes proposed to improve the CPT signal quality, the selection of atoms and buffer gases, and the development of micro-cell fabrication. With regard to the re- liability, stability, and service life of the CSACs, the research regarding the sensitivity of the CPT resonance to temperature and laser power changes is also reviewed, as well as the CPT resonance＇s collision and light of frequency shifts. The first generation CSACs have already been developed but its characters are still far from our expectations. Our conclusion is that miniaturization and power reduction are the most important aspects calling for further research.     

Optimal recovery of integral operators and its applications

In this paper we present the solution to a problem of recovering a rather arbitrary integral operator based on incomplete information with error. We apply the main result to obtain optimal methods of recovery and compute the optimal error for the solutions to certain integral equations as well as boundary and initial value problems for various PDE’s.     

Dislocation-density-based constitutive modelling of tensile flow and work-hardening behaviour of P92 steel

The flow and work-hardening behaviour of tempered martensitic P92 steel have been investigated using phenomenological constitutive model in the temperature range 300–873 K for the strain rates ranging from 3.16 × 10^?5 to 1.26 × 10^?3 s^?1. The analysis indicated that the hybrid model reduced to Estrin–Mecking (E–M) one-internal-variable model at intermediate and high temperatures. Further, the analysis also indicated that dislocation dense martensite lath/cell boundaries and precipitates together act as effective barriers to dislocation glide in P92 steel. The flow behaviour of the steel was adequately described by the E–M approach for the range of temperatures and strain rates examined. Three distinct temperature regimes have been obtained for the variations in work-hardening parameters with respect to temperature and strain rate. Signatures of dynamic strain ageing in terms of the anomalous variations in work-hardening parameters at intermediate temperatures and the dominance of dynamic recovery at high temperatures have been observed. The evaluation of activation energy suggested that deformation is controlled by the dominance of cross-slip of dislocations at room and intermediate temperatures, and climb of dislocations at high temperatures.     

Entropic effect implication for change in polymer coils swelling state in the demixing enthalpy recovery of aqueous poly(vinyl methyl ether) solutions

Time‐dependent demixing enthalpy recovery behavior of aqueous poly(vinyl methyl ether) (PVME) solutions exhibits distinct recovery characteristics in three concentration regions. The absence of recovery behavior below a water concentration of 38.3 wt % indicates that the PVME coil is in a globular state. The typically sigmoidal recovery behavior of demixing enthalpy above 38.3 wt % is ascribed to the reswelling of the collapsed polymer coils induced by the entropic effect. The increase in difference between the upper and lower limits indicates the continued swelling of the PVME coils. Above 65 wt %, a dominant diluting effect can be observed, and a much longer phase separation time is needed to reach the expected lower limit. In contrast, the recovery of demixing enthalpy in a wide range of water concentration (from 38.3 to 90 wt %) exhibits the same feature. The infrared spectroscopy results are in agreement with the above macroscopic differential scanning calorimetry results. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2019 , 57, 142–151     

Structural recovery mechanism after shear induced orientation of multiwalled carbon nanotube in polypropylene matrix

In this work the flow induced orientation and the governing mechanism of structural recovery of multi-walled carbon nanotube (MWCNT) filled polypropylene nanocomposites were investigated. A series of linear and nonlinear melt rheological measurements including stress growth and time sweep experiments were performed at different temperatures to study the structural breakdown, nanoparticles orientation, subsequent structural recovery and MWCNT loadings. The results showed that the structural recovery occurred in two stages. The first stage, initial agglomeration, showed a quick recovery which was independent of temperature, can be interpreted in terms of inter-particle van der Waals interactions. This structural recovery stage had major contribution in the storage modulus increment. The second stage of the recovery, secondary agglomeration, was slower and dependent on temperature, can be attributed to rotary diffusion of nanoparticles. This stage had minor contribution to the storage modulus increase. Storage modulus increment in both of these agglomeration was attributed to the increase of nanotube-nanotube contacts. Both of these stages were confirmed by transmission electron micrographs. These result were in a good agreement with those calculated using van der Waals and diffusion concepts.     

Phosphorus and Energy Recovery from Manure and Digestion Residues

Abstract

Human and animal excrements, in particular manure, stand for a significant and undisputable source of plant nutrients and renewable energy. In Europe, only 36% of P-inputs to soils originate from primary resources (rock phosphate) whereas 63% come from animal and human excretions applied to cropland as manure, digestion residues and sewage sludge. Simultaneously these waste flows represent a potential hazard to human health and aquatic bodies because of pathogens and eutrophication. Management of these waste flows is far from being sustainable, in part due to the lack of efficient processing technologies. A cooperative InnoEnergy—EIT financed KIC Knowledge and Innovation Community—research project pursues development and demonstration of highly efficient technologies to overcome the constraints and to yield renewable phosphate fertilizers and energy from waste flows that may have a combined technical energy potential of 3,600 PJ/year and an annual phosphate recovery potential of 4.5–5.5 million tonnes (as P₂O₅) in Europe.     

A New Polymer Flooding Agent Prepared Through Intermacromolecular Complexation

Abstract

This paper reports a new polymer flooding agent used for enhanced oil recovery (EOR), poly(acrylamide-acrylic acid) [P(AM-AA)]/poly(acrylamide-dimethyldiallylammonium chloride) [P(AM-DMDAAC)] polyelectrolyte complex. The solution viscosity of prepared P(AM-AA)/P(AM-DMDAAC) complex is enhanced due to the strong interaction between the two oppositely charged copolymers, i.e., P(AM-AA) and P(AM-DMDAAC), which were prepared through radical copolymerization. The ionic content could be controlled by changing the reaction conditions. The structures of the two copolymers were characterized through FT-IR, ¹H NMR, and acidic and precipitation titration. The formation as well as the factors affecting the P(AM-AA)/P(AM-DMDAAC) polyelectrolyte complex were investigated by means of viscosity measuring and light transmittance testing. The experimental results show that the composition of the copolymers, the pH value, and the concentration of the polymer solutions have remarkable effects on the formation of P(AM-AA)/P(AM-DMDAAC) polyelectrolyte complex and the solution viscosity. When DMDAAC content in P(AM-DMDAAC) is 3.2 mol%, AA content in P(AM-AA) is 48–58 mol%, the weight ratio of P(AM-AA) to P(AM-DMDAAC) is 70/30–30/70, the pH value of the solution is 6–10, and the concentration of solution is 1000–3500 ppm, then a homogeneous solution of P(AM-AA)/P(AM-DMDAAC) poly-electrolyte complex could be obtained which exhibits a much higher solution viscosity compared with its components.