A New Method of Introducing SCH3 and SCD3 Groups to Phosphorothioates

Abstract

A new synthesis of phosphorothioates starting from phosphites and cyanuric chloride (TCT)-activated DMSO is reported herein. This method enables the incorporation of SCH₃ and SCD₃ groups into phosphorothioates in good yields. The labeling purities of the products are excellent.     

表面吸附碱金属原子的超短碳纳米管体系的结构和非线性光学性质

采用密度泛函理论(DFT)方法系统研究了表面吸附碱金属Li原子的超短碳纳米管([8]cyclophenacene)体系的结构和非线性光学性质.在这些体系中,Li原子均能稳定地吸附在超短碳纳米管表面,其吸附能高达84.0~106.2 kJ/mol.当吸附1~2个Li原子时,Li原子和碳纳米管之间发生了明显的电荷转移过程,使体系的一阶超极化率(β0)值明显改善,β0值从0迅速增加到3.42×103~8.29×103a.u.;当吸附的Li原子数增加到3时,体系内部产生了额外电子,有效地降低了体系最主要跃迁的跃迁能,使体系的一阶超极化率进一步提升(高达2.59×106a.u.).此外,Li原子之间的距离也是影响吸附体系β0值的重要因素.     

The double phosphates MIMIIPO4 (MI – Na,K; MII – Mg,Mn, Co,Ni, Zn) – synthesis from chloride melts and characterization

The particularities of the chemical interaction in systems M^IPO₃‐M^IIO(or Mn₂O₃)‐M^ICl (M^I – Na, K; M^II – Mg, Co, Ni, Zn) have been investigated at the temperature 1073 K and molar ratios P/M^x = 1 or 2 and M^ICl/(M^IPO₃ + M^IIO(or Mn₂O₃)) = 30. The conditions of formation of complex phosphates M^ІM^IIPO₄ and Na₄Ni₃(PO₄)₂P₂O₇ have been found. Influences of the nature of alkali and bivalent metals on the products composition were discussed. The advantages of chloride melts using (synthesis time reduction and temperature reducing) for preparing of complex phosphates were shown. The synthesized compounds have been characterized using the powder X‐ray diffraction, Fourier transform infrared and diffuse reflectance spectroscopies.     

Weak alkali and alkaline earth metal complexes of low molecular weight ligands in aqueous solution

This work is aimed at reviewing the chemical literature dealing with thermodynamic aspects of the weak complex formation (species with log K values less than about 3) between alkali and alkaline earth metal ions with low molecular weight inorganic and organic ligands in aqueous solution. The following ligands (up to hexavalent anions) were examined in detail: (i) hydroxide, chloride, sulfate, carbonate and phosphate as inorganic, and (ii) carboxylates, amines, amino acids, complexones and nucleotides as organic ligands. The paper also identifies the main reasons responsible for the dispersion of the stability data on ion pairs in the literature. When possible, the trend of stability for the different metal ions interacting with the same ligand will be considered to find predictive interaction relationships. Since the stability of weak alkali and alkaline earth metal complexes are mainly due to electrostatic interaction, simple empirical relationships were obtained between log K and the charge of the anionic ligand. The interest for alkali and alkaline earth cations rises since they are used in study of basic science as components of the supporting electrolyte and are widely diffused in natural fluids. Some examples of application of this science were presented too, to show the role of weak complex formation in the modelling process of natural systems.     

Excess properties of the (Ln2−2xCaxThx)(PO4)2 (Ln = La, Ce) solid solutions

X-ray powder diffraction at room temperature and drop calorimetry at T = 1005 K were performed on LnPO₄–CaTh(PO₄)₂ (Ln = La, Ce) solid solutions. The results show excess molar volume and excess enthalpy indicating deviations from ideal behaviour that have been interpreted in terms of lattice strains resulting from the ion size effects of substitution of the Ln³⁺ with (Ca²⁺ + Th⁴⁺).     

Facile nucleophilic fluorination by synergistic effect between polymer-supported ionic liquid catalyst and tert-alcohol reaction media system

A highly efficient method was developed for nucleophilic fluorination using an alkali metal fluoride through the synergistic effect of the polymer-supported ionic liquid (PSIL) as a catalyst and tert-alcohol as an alternative reaction media. This PSIL/tert-alcohol system not only enhances the reactivity of alkali metal fluorides and reduces the formation of by-products but also allows the use of a polymer-supported catalyst protocol. As an example, the nucleophilic fluorinations of the model compound, 2-(3-bromopropoxy)naphthalene, with CsF using only tert-amyl alcohol as solvent (for 2 h reaction time), 0.5 equiv of PS[hmim][BF₄] in CH₃CN (for 12 h reaction time), and 0.5 equiv of PS[hmim][BF₄] in tert-amyl alcohol (which is a PSIL/tert-alcohol system for the synergistic effect; for 2 h reaction time) provided 18, 40, and 84% yield, respectively. The characteristics of the nucleophilic fluorination reactions of some halo- and alkanesulfonyloxyalkane systems to the corresponding fluoroalkanes using various alkali metal fluorides are also reported.     

Selectivity Control of the Ligand Exchange at Carbon in α-Metallated Ylides as a Route to Ketenyl Anions**

α-Metallated ylides have recently been reported to undergo phosphine by CO exchange at the ylidic carbon atom to form isolable ketenyl anions. Systematic studies on the tosyl-substituted yldiides, R₃P=C(M)Ts (M=Li, Na, K), now reveal that carbonylation may lead to a competing metal salt (MTs) elimination. This side-reaction can be controlled by the choice of phosphine, metal cation, solvent and co-ligands, thus enabling the selective isolation of the ketenyl anion [Ts−CCO]M ( 2-M ). Complexation of 2-Na by crown ether or cryptand allowed structure elucidation of the first free ketenyl anion [Ts−CCO]⁻, which showed an almost linear Ts−C−C linkage indicative for a pronounced ynolate character. However, DFT studies support a high charge at the ketenyl carbon atom, which is reflected in the selective carbon-centered reactivity. Overall, the present study provides important information on the selectivity control of ketenyl anion formation which will be crucial for future applications.     

Bimetallic Anionic Organic Frameworks with Solid-State Cation Conduction for Charge Storage Applications

A new phosphonate-based anionic bimetallic organic framework, with the general formula of A₄−Zn−DOBDP (wherein A is Li⁺ or Na⁺, and DOBDP⁶⁻ is the 2,5-dioxido-1,4-benzenediphosphate ligand) is prepared and characterized for energy storage applications. With four alkali cations per formula unit, the A₄−Zn−DOBDP MOF is found to be the first example of non-solvated cation conducting MOF with measured conductivities of 5.4×10⁻⁸ S cm⁻¹ and 3.4×10⁻⁸ S cm⁻¹ for Li₄- and Na₄- phases, indicating phase and composition effects of Li⁺ and Na⁺ shuttling through the channels. Three orders of magnitude increase in ionic conductivity is further attained upon solvation with propylene carbonate, placing this system among the best MOF ionic conductors at room temperature. As positive electrode material, Li₄−Zn−DOBDP delivers a specific capacity of 140 mAh g⁻¹ at a high average discharge potential of 3.2 V (vs. Li⁺/Li) with 90 % of capacity retention over 100 cycles. The significance of this research extends from the development of a new family of electroactive phosphonate-based MOFs with inherent ionic conductivity and reversible cation storage, to providing elementary insights into the development of highly sought yet still evasive MOFs with mixed-ion and electron conduction for energy storage applications.     

Flame retardancy mechanisms of aryl phosphates in combination with boehmite in bisphenol A polycarbonate/acrylonitrile-butadiene-styrene blends

The influence of nano-dispersed 5 wt.% boehmite (AlOOH) and 5 wt.% AlOOH combined with bisphenol A bis(diphenyl phosphate) (BDP) in bisphenol A polycarbonate/acrylonitrile-butadiene-styrene (PC/ABS) + poly(tetrafluoroethylene) (PTFE), and 1 wt.% AlOOH with and without BDP, resorcinol bis(diphenyl phosphate) (RDP), and triphenyl phosphate (TPP), on PC/ABS + PTFE has been investigated. Possible flame retardancy mechanisms are revealed. Thermogravimetry (TG) and evolved gas analysis (TG-FTIR) are used to study pyrolysis, a cone calorimeter applying different external heat fluxes is used to investigate fire behaviour, and LOI and UL 94 are used to investigate flammability. Fire residues were investigated using ATR-FTIR.Adding 5 wt.% AlOOH decreases the peak heat release rate, as also has been reported for polymer nanocomposites with other layered structures. AlOOH releases water, and adding 5 wt.% AlOOH crucially influences thermal decomposition by enhancing the hydrolysis of PC and of BDP. For PC/ABS + PTFE + BDP + 5 wt.% AlOOH, the formation of AlPO₄, for instance, results in antagonistic effects on the charring of PC + BDP, whereas synergy is observed in LOI. When only 1 wt.% AlOOH is added to the PC/ABS + PTFE with and without BDP, RDP and TPP, respectively, no significant influence is observed on thermal decomposition, UL 94, LOI or performance in the cone calorimeter.     

Splitting tendency of cellulosic fibers. Part 3: splitting tendency of viscose and modal fibers

The splitting tendency of viscose and modal fibers in aqueous alkali solutions of LiOH, NaOH, KOH and TMAH was investigated. The viscose fibers splitted up to 5–7 fibrils, whereas modal fibers splitted up to 2–4 fibrils depending on alkali type and concentration. The fibrillar structure of lyocell enables it to split more (15–20 fibrils) than viscose and modal fibers. Splitting occurs where internal stress of fiber is high due to different alkali or void distribution inside fiber. The splitting test couldn’t be achieved for viscose and modal fibers between 1 and 5 M concentration of NaOH and TMAH solutions due to breakage of fibers during test. Above 5 M concentration, no split can be observed due to even distribution of alkali inside fiber. Paper presented at the 7th World Textile Conference, AUTEX 2007, Tampere, Finland, 26–28 June 2007. Christian-Doppler Laboratory of Textile and Fiber Chemistry of Cellulosics is a Member of European Polysaccharide Network of Excellence (EPNOE), www.epnoe.org