Plasma-Catalytic Decomposition of Phenols in Atmospheric Pressure Dielectric Barrier Discharge

This study investigated the processes for the destruction of phenol and its derivatives (resorcin and pyrocatechol) in aqueous solutions under the action of an oxygen dielectric barrier discharge (DBD) at atmospheric pressure in the presence or absence of catalysts in the plasma zone. It was shown that the DBD had a high decomposition efficiency for phenol and its derivatives (up to 99%). Phenol was the most stable and pyrocatechol was the least. In a plasma-catalytic hybrid process, the effective rate constants for phenol, resorcin and pyrocatechol decomposition were 11, 4 and 2.5 times higher, respectively, than those for the DBD treatment without catalysts. The process also resulted in a 1.4, 1.6 and 1.2 times higher rate of carboxylic acid formation for phenol, resorcin and pyrocatechol, respectively. The fractional conversion into the respective carboxylic acids reached 56% for phenol and 68% for resorcin and pyrocatechol.     

Conformational behaviour of 2,2′-bipyrrole

The rotational potential around the interannular bond in 2,2-bipyrrole has been calculated making use of standard minimal STO-3G and split valence 4-31G basis sets. Geometrical optimization concerning the most significant interannular internal parameters has been performed with both basis sets. The trans conformer is predicted to be more stable than the cis. The minimal basis set predicts the existence of a cisoid-gauche minimum which after limited optimization becomes very shallow and it seems to be an artifact of the rigid rotor approximation. At 4-31G level, both the trans and cis conformers represent maxima in the potential curve and two gauche minima appear at =46.0° and =147.6°, the latter being the absolute minimum. The absolute maximum of the potential curve corresponds to the cis conformer.     

丙烯和甲苯的超共轭效应的理论研究

用从头算对丙烯和甲苯2个超共轭体系进行计算,结果表明甲基上氢原子参与超共轭时,其碳氢键键长增大,氢上集居数减少,丙烯、甲苯的甲基旋转势垒为7.61及0.096 kJ/mol.超共轭基作用相当于一带有孤对电子参与共轭之杂原子,超共轭体系不同构型稳定性可用M=sum from i=1 to 3(sinθ_i[sin(θ_i-α)+sinα])来表征。     

Thermal degradation of vinylidene chloride/[4-(t-butoxycarbonyloxy)phenyl]methyl acrylate copolymers

Vinylidene chloride polymers containing comonomer units capable of consuming evolved hydrogen chloride to expose good radical-scavenging sites might be expected to display greater thermal stability than similar polymers containing simple alkyl acrylates as comonomer. Incorporation of a comonomer containing the phenyl t-butyl carbonate moiety into a vinylidene chloride polymer has the potential to afford a polymer with pendant groups which might interact with hydrogen chloride to expose phenolic groups. Copolymers of vinylidene chloride with [4-(t-butoxycarbonyloxy)phenyl]methyl acrylate have been prepared, characterized, and subjected to thermal degradation. The degradation has been characterized by thermal and spectroscopic techniques. The degradation of vinylidene chloride/[4-(t-butoxycarbonyloxy)phenyl]methyl acrylate copolymers is much more facile than the same process for similar copolymers containing either [4-(isobutoxycarbonyloxy)phenyl]methyl acrylate or methyl acrylate, a simple alkyl acrylate, as comonomer. During copolymer degradation, [4-(t-butoxycarbonyloxy) phenylmethyl acrylate units are apparently converted to acrylic acid units by extensive fragmentation of the sidechain. Thus, the phenyl t-butyl carbonate moiety does function as a labile acid-sensitive pendant group but its decomposition in this instance leads to the generation of a phenoxybenzyl carboxylate capable of further fragmentation.     

Thermal degradation of vinylidene chloride/vinyl chloride copolymers in the presence of N-substituted maleimides

As a consequence of their excellent barrier properties vinyl chloride/vinylidene chloride copolymers have long been prominent in the flexible packaging market. While these polymers possess a number of superior characteristics, they tend to undergo thermally- induced degradative dehydrochlorination at process temperatures. This degradation must be controlled to permit processing of the polymers. Three series of N-substituted maleimides (N-alkyl-, N-aralkyl, and N-aryl) have been synthesized, characterized spectroscopically, and evaluated as potential stabilizers for a standard vinyl chloride/vinylidene chloride (85 mass%) copolymer. As surface blends with the polymer, these compounds are ineffective as stabilizers. However, significant stabilization may be achieved by pretreatment of the polymer with N-substituted maleimides. The most effective stabilization of the polymer is afforded by N-aralkyl- or N-arylmaleimides, most notably, N-benzylmaleimide and N-p-methoxyphenylmaleimide.     

A new inorganic-organic polymer for the passivation of thin film capacitors

Inorganic-organic polymers with barrier properties against water vapor, excellent electrical data (3, 2, R _D>10¹⁶ cm, E _D up to 400 V/µm) and good adhesion to various substrate materials have been developed. Tailored modifications of these materials provide an excellent protective coating for thin film capacitors. Several mm thick, expensive, encapsulations could be replaced by thin coatings (up to 10 µm). The polymer coating allows the use of thin film chip capacitors in surface-mount technology. As a measure for the efficiency of the coating, the capacitance decrease under controlled humidity has been used. The influence of the material composition, the type of catalyst during sol-gel processing and the curing conditions have been studied. Adhesion and water vapor permeation properties of the polymers and rheological properties of the coating solutions have been investigated. A protective coating is developed, which increases the withstandness of capacitors against humid conditions (90°C, 100% rel. humidity) by a factor of about 30 (compared to uncoated capacitors) and shows no crack formation during thermal cycling.     

Ligand dynamics and reactivity in trimetallic clusters

The general relationships between trinuclear cluster reactivity and the ligand dynamical processes in these systems are explored. Three specific mechanistic studies are presented: (1) the rate and stereochemistry of ligand addition to ₃-imidoyl complexes, (2) the factors influencing the rate of carbon-hydrogen bond activation in ₃-alkyne complexes, and (3) the origin of anomalously large kinetic deuterium isotope effect in metal to ligand and ligand to metal hydrogen transfer in trinuclear and binuclear complexes. In all three cases, the current state of the mechanistic studies are summarized and the possible rate of specific ligand dynamical processes in controlling the mechanism are put forth.     

化学动力学中隧道效应的研究（Ⅱ）──甲醛单分子反应渠道间的相互作用研究

对甲醛单分子热反应模拟给出了分子渠道Ｅｃｋａｒｔ垒，计算了该渠道在不同温度下的隧道校正因子，研究了分子渠道与游离基渠道间的相互作用，计算了存在反应渠道间相互作用时各渠道的Ｋ＿（ｕｎｉ）（ｉ）、Ｅａ（ｉ），分子渠道考虑隧道效应，而游离基渠道无隧道效应，计算结果与实验结果一致。     

Intramolecular proton transfer induced by divalent alkali earth metal cation in the gas state

Interactions between divalent alkali earth metal (DAEM) ions M (M?Be, Mg, Ca, Sr, Ba) and the second stable glycine conformer in the gas phase, which can transfer into the ground‐state glycine‐M²⁺ (except the glycine–Be²⁺) among each corresponding isomers when these divalent metal ions are bound, are studied at the hybrid three‐parameter B3LYP level with three different basis sets. Proton transfers from the hydroxyl to the amino nitrogen of the glycine without energy barriers have been first observed in the gas phase in these glycine–M²⁺ systems. The interaction between the glycine and these DAEM ions except beryllium and magnesium ion only create an amino hydrogen pointing to the original hydroxyl due to their weaker interaction relative to those divalent transition metal (DTM) ion‐bound glycine derivatives, being obviously different from that between the glycine and DTM ions, in which two amino hydrogens point to the original hydroxyl oxygen when these metal‐chelated glycine derivatives are produced. The interaction energy between the glycine and divalent magnesium would be the boundary of one or two amino hydrogens pointing to the hydrogyl oxygen, i.e., the ?170.3 kcal/mol of binding energy is a critical point. Similar intramolecular proton transfer has also been predicted for those DTM ion‐chelated glycine systems; however, that in the gas state has not been observed in the monovalent metal ion‐coordinated glycine systems. The binding energy between some monovalent TM ion and the glycine is similar to that of the glycine–Ba²⁺, which has the lowest binding strength among these DAEM–ion chelated glycine complexes. The difference among them only lies in the larger electrostatic and polarized effects in the latter, which favor the stability of the zwitterionic glycine form in the gas phase. According to these observations, we predict that the zwitterionic glycine would exist in the field of two positive charges in the gas phase. © 2003 Wiley Periodicals, Inc. Int J Quantum Chem 94: 205–214, 2003     

Rotational barrier for 1-acetyl-2-(p-methoxy benzyl)-3-pyrroline

Calculation of the rotational barriers for the trans- and cis-forms of 2-(p-methoxy)-1-acetyl-pyrroline are presented in this paper. It is found that thetrans-isomer is slightly more favourable energetically, while the rotations of the cis-form are highly impeded. Hence the relevant rotations are in thetrans-form which stabilizes its energy by forming a weak inner proton bond between the carbonyl oxygen and the pyrroline ring. The acetyl rotational barrier is of the order of 8 kcal, which is well in accord with experimental data reported in the literature for other acetyl-amide derivatives.[/p]Work supported in part by Instituto Mexicano del Petróleo.