Image analysis in the electron microscopy of cellulose protofibrils II. Digital correlation methods

Electron micrographs of parallel arrays of negatively stained ramie cellulose protofibrils were analyzed using the two-dimensional digital autocorrelation function (ACF). The method is based upon the statistical analysis of images in real space. The ACF shows strong parallel streaks of high correlation, and the lateral distance between adjacent streaks allows the mean interfibrillar distance to be estimated as 3.7 nm. The intensity profile along the streaks shows a weak modulation with peaks occurring at integral multiples of 3 or 6 nm. These results provide direct evidence that there is a regular axial texture in the protofibrils, and corroborate the conclusions previously drawn from optical diffraction analysis. Using the difference vectors found in the ACF it has been possible to reduce the picture noise level by linear integration, thereby obtaining an enhanced image. A preliminary result obtained in this way suggests that the projected protofibril morphology associated with the observed axial periodicity is a ribbon-like zigzag structure. Possible applications of the method for future work are discussed.     

Conformational behaviour of 2,2′-bipyrrole

The rotational potential around the interannular bond in 2,2-bipyrrole has been calculated making use of standard minimal STO-3G and split valence 4-31G basis sets. Geometrical optimization concerning the most significant interannular internal parameters has been performed with both basis sets. The trans conformer is predicted to be more stable than the cis. The minimal basis set predicts the existence of a cisoid-gauche minimum which after limited optimization becomes very shallow and it seems to be an artifact of the rigid rotor approximation. At 4-31G level, both the trans and cis conformers represent maxima in the potential curve and two gauche minima appear at =46.0° and =147.6°, the latter being the absolute minimum. The absolute maximum of the potential curve corresponds to the cis conformer.     

Comparison ofn-decane hydroconversion with Pt/SAPO-5 and Pt/SAPO-11 catalysts

The product distributions from bifunctional conversion ofn-decane over Pt/SAPO-5 and Pt/SAPO-11 catalysts are compared in detail. Selectivities in decane reaction vary largely with the catalyst employed: Pt/SAPO-11 produces high yields of feed isomers, whereas Pt/SAPO-5 gives high yields of cracked products and only under mild reaction conditions are isodecanes the main products obtained. These selectivities seem to be determined by the structure of the catalyst.     

High temperature polymer blends: an overview of the literature

A review of work which has been performed on high temperature polymer blends is presented. The discussion is divided into miscible and immiscible blends. It is pointed out that one problem with miscible polymer blends is that of processing in the miscible state. In the case of immiscible blends, particularly ones containing liquid crystal polymers, the issue of adhesion of the two phases is discussed. Finally, the need for better theoretical models for predicting miscibility in polymer blends is highlighted.     

探针反应和FTIR法研究Pt与L型沸石的相互作用

探针反应和ＦＴＩＲ法研究Ｐｔ与Ｌ型沸石的相互作用董家禄,朱建华,须沁华,张婕,刘大壮（南京大学化学系,南京,２１０００８）（郑州工学院化工系,郑州,４５０００２）关键词Ｐｔ／Ｌ沸石,沸石催化剂,异丙醇分解反应,Ｐｔ－载体相互作用Ｐｔ的分散度和电子状态...     

褐煤超临界流体抽提产物中脂肪烃组成结构的特征

用硅胶-氧化铝柱色谱预分离和色谱-质谱分析研究了两种褐煤超临界流体抽提物中脂肪烃馏分组成结构特征。结果表明,除主要成份正构烷烃(C_(13)～C_(33))外,尚有少量的类异戊二烯烃(姥鲛烷、植烷等)和萜烷。其中萜烷以五环三萜为主(C_(27)、C_(29)～C_(32)藿烷类化合物),并有一定量的C_(27)、C_(29)和C_(30)藿烯,倍半萜和三环二萜烷含量很少。未检出甾烷。此外,还检出一完整系列的烯烃。试验结果表明,超临界流体抽提条件对褐煤抽出物各组分、含量及其分布有一定的影响。     

An investigation into the self-propagating high temperature synthesis (SHS) of superconducting ceramics by thermal methods

The SHS route is based on the well-known thermite reaction, in which a strongly exothermic reaction can sustain itself and propagate in the form of a combustion wave until the reactants have been completely consumed. The successful application of the method to the synthesis of superconducting ceramics of stoichiometry RBa₂Cu₃O_y (R=Y, Er, Yb) is reported. The 123 phase was obtained when pellets of R₂O₃, BaO₂ and Cu metal in the correct proportions were dropped into a heater held at 800°C in an oxygen atmosphere and left there for only 10 minutes. Thermal methods (DSC and DTA) are excellent techniques with which to investigate the dependence of the reaction on heating rate, atmosphere and starting composition.     

Synthesis ofS-(+)-hydroprene

A novel path toS-(+)-hydroprene (1) starting from the technical gradeS-(+)-dihydromyrcene (2, e.e. 50%) is proposed. The latter was selectively transformed intoS-3,7-dimethyloctanal (5) in three steps including hydroalumination. The reactions of5 with allyl- or methallylmagnesium chloride followed, respectively, either by oxygenation in the presence of PdCl₂/CuCl or by ozonolysis, affordS,E-6,10-dimethyl-3-undecen-2-one (7) which was treated with ethoxyethynylmagnesium bromide to give the title juvenile hormone analogue in 23% overall yield.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No 1, pp. 110–112, January, 1993.     

Electron kinetics of collision dominated r.f. bulk plasma in CO: The role of second-kind collisions

Electron energy distribution functions (EEDF) and related properties in the bulk region of the rf CO plasma at the reduced rf field frequency /p₀=×10⁷ sec^–1 torr^–1 have been calculated by solving the time-dependent spatially homogeneous Boltzmann equation in the presence of second-kind collisions and have been interpreted on a microphysical basis. The results show that second-kind collisions (vibrational and electronic) strongly affect the temporal evolution of EEDF, of the mean energy, and of the mean collision frequencies for vibrational and electronic excitation processes, as well as for ionization. In particular, second-kind collisions in the CO rf bulk plasma strongly decrease the modulation of the mean ionization frequency during its periodical alteration in the rf field. Furthermore, the effect of second-kind collisions on an approximate determination of the time-averaged EEDF in the rf bulk plasma using the so-called effective-field appriximation has been estimated.     

A new approach to 6-deoxy-D-allofuranose- and 6-deoxy-L-talofuranose derivatives from 1,2:5,6-di-O-isopropylidene α-D-glucofuranose

3-O-Acetyl-1,2-O-isopropylidene--D-allofuranose (2 b) was prepared from 1,2:5,6-di-O-isopropylidene--D-allofuranose (1 b). Treatment of2 b with triphenylphosphine-diethyl azodicarboxylate afforded regio- and stereospecifically the 5,6-epoxy--D-allo derivative (3). The other diastereomeric compound, 5,6-epoxy-1,2-O-isopropylidene--L-talofuranose (6) was also prepared stereoselectively from2 b via the intermediates5 a and5 b. The epoxy sugars3 and6 were converted with lithium aluminum hydride to the corresponding 6-deoxy-1,2-O-isopropylidene--D-allofuranose (4 a) and --L-talofuranose (7 a) derivatives. Hydrolysis of4 a and7 a afforded 6-deoxy-D-allose and 6-deoxy-L-talose, respectively. The corresponding 3,5-di-O-acetyl- (4 b and7 b) and the 3,5-O-(tetraisopropyldisiloxane-1,3-diyl) derivatives (4 c and7 c) are also described. Selective removal of the isopropylidene group and subsequent acetylation offers a convenient route to prepare sugar derivatives containing furanose ring, like8 b, as a suitable precursor for nucleoside analogs.Herrn Prof. Dr.K. Komarek mit den besten Wünschen zum 60. Geburtstag gewidmet.