An innovative method for quality control of conjugated Haemophilus influenzae vaccines: A short review of two-dimensional nanoparticle electrophoresis

This article provides an overview of a 2D agarose electrophoretic procedure for the characterization of semi-synthetic Haemophilus influenzae type b meningitis vaccines that were prepared for the immunization of small children. The analysis of such vaccines has been particularly challenging because the vaccine particles (i) are highly negatively charged, (ii) are as large as or even larger than intact viruses, and (iii) have a continuous (polydisperse) size distribution because of randomizing steps in the vaccine production (sonification and crosslinking). As a result of these characteristics, 1D electrophoresis of the vaccines produced smears without discernable peaks, but with a second dimension of separation a characteristic vaccine fingerprint was obtained. Whereas O’Farrell gels can accomplish a 2D separation according to size and charge for samples with protein-sized particles, nondenaturing 2D agarose electrophoresis achieves a similar result for much larger virus-sized particles. The separation principle, however, is different. Even though the 2D electrophoretic method was developed from 1983 to 1995, it remains a promising tool for vaccine quality control and for predicting vaccine effectiveness. Modern technology makes the analysis significantly more practical and affordable than it was more than 10 years ago, and the method is applicable to a variety of conjugated vaccines and complex mixtures of virus-sized particles.     

Strategies for monitoring the emerging polar organic contaminants in water with emphasis on integrative passive sampling

Although polar organic contaminants (POCs) such as pharmaceuticals are considered as some of today's most emerging contaminants few of them are regulated or included in on-going monitoring programs. However, the growing concern among the public and researchers together with the new legislature within the European Union, the registration, evaluation and authorisation of chemicals (REACH) system will increase the future need of simple, low cost strategies for monitoring and risk assessment of POCs in aquatic environments. In this article, we overview the advantages and shortcomings of traditional and novel sampling techniques available for monitoring the emerging POCs in water. The benefits and drawbacks of using active and biological sampling were discussed and the principles of organic passive samplers (PS) presented. A detailed overview of type of polar organic PS available, and their classes of target compounds and field of applications were given, and the considerations involved in using them such as environmental effects and quality control were discussed. The usefulness of biological sampling of POCs in water was found to be limited. Polar organic PS was considered to be the only available, but nevertheless, an efficient alternative to active water sampling due to its simplicity, low cost, no need of power supply or maintenance, and the ability of collecting time-integrative samples with one sample collection. However, the polar organic PS need to be further developed before they can be used as standard in water quality monitoring programs.     

Rapid quantification of iridoid glycosides analogues in the formulated Chinese medicine Longdan Xiegan Decoction using high-performance liquid chromatography coupled with mass spectrometry [corrected

Longdan Xiegan Decoction (LXD) is a formulated preparation composed of 10 ingredient herbs, with iridoids as the main bioactive components. In this study, a rapid, simple and reliable method of simultaneous determination of four iridoid glycosides in LXD using high-performance liquid chromatography (HPLC) coupled with electrospray ionization mass spectrometry (MS) was first developed and validated. The four iridoid glycosides references were isolated from LXD extract and purified using a preparative HPLC chromatography. The sample preparation for quantification comprised of a simple ultrasonic extraction and the satisfactory chromatographic separation of the four structurally similar iridoid glycosides was effected in less than three minutes on a CAPCELL PAK C(18) MGII column (3 microm, 100 mm x 2.0 mm), using an elution system of 10% methanol and their concentrations in different batches of LXD and ingredient herbs were simultaneously determined by HPLC-MS/MS using a multiple reaction monitoring (MRM) mode. The method was validated with respect to the overall intra- and inter-day variation (RSD less than 8%) and the limits of quantification for the four iridoid glycosides were 35, 20, 37 and 33 ng/mL, respectively.     

Bioaerosols chemometric characterization by laser-induced fluorescence: Air sample analysis

A laser-induced fluorescence (LIF) system was optimized using a solution of Micrococcus luteus in ethanol/water 50% (v/v) to obtain spectra in the gas phase of 46 bioaerosols. Experimental designs such as Plackett-Burman and factorial design were applied. The fluorescence spectra were treated chemometrically by principal component analysis, linear discriminant analysis and hierarchical cluster analysis to classify the microorganisms according to family, morphology and gram. The best results were obtained using LDA. The method was applied to air samples and the LIF results allowed to characterize bioaerosols reliability. The robustness of the technique was demonstrated by the identification of many bacteria.     

Combined on-line transmission FTIR measurements and BTEM analysis for the kinetic study of a consecutive reaction in aqueous-organic phase medium

Combined on-line transmission FTIR spectroscopy and band-target entropy minimization (BTEM) analysis were employed in order to monitor and analyze the kinetics of the alkaline hydrolysis reaction of diethyl phthalate (DEP) in aqueous-ethanol solvent mixture. This reaction is irreversible and involves two consecutive steps with the formation of the observable mono-ion intermediate species. The pure component mid-FTIR spectra of the reactive species involved in this reaction, namely DEP, mono-ion intermediate and di-ion product were successfully reconstructed using BTEM. Their corresponding concentrations were also calculated and subsequently employed to derive the kinetic rate parameters. The effect of temperature and the solvent mixture compositions on these two consecutive reaction steps were also discussed. The temperature variation study showed that both reaction rate coefficients increased with temperature. Both rate coefficients were also affected by the solvent mixture compositions and reached minimum values at certain water-ethanol solvent composition (circa 60% (v/v)). This study shows the utility of combined on-line transmission FTIR spectroscopy and chemometric techniques for the present, rather complex, consecutive organic reaction. Moreover, the present type of approach could facilitate better understanding of a wide variety of organic reactions that are performed in aqueous and mixed aqueous-organic solvents.     

化学分析中的质量控制

从人、机、料、法、环、测6方面讨论了化学分析中质量控制手段,结合分析化学实验室多年的实践经验提出了具体的质量控制措施,对如何保证分析结果的准确性和可靠性进行了详细论述.     

Utility of reaction intermediate monitoring with photodissociation multi-stage (MS) time-of-flight mass spectrometry for mechanistic and structural studies: Phosphopeptides

In tandem mass spectra of phosphopeptides, intact sequence ions are often missing or appear weakly. Instead, dephosphorylated sequence ions appear prominently. In this work, we used photodissociation (PD) multi-stage (MSⁿ) time-of-flight mass spectrometry that can monitor reaction intermediates with lifetime as short as 100 ns to study the formation of dephosphorylated sequence ions such as y_n-H₃PO₄. y_n-H₃PO₄ was found to be formed mainly by H₃PO₄ loss from y_n. For doubly phosphorylated peptides, y_n seemed to lose H₃PO₄ stepwise and form y_n-H₃PO₄ and y_n-2H₃PO₄. Even when y_n was absent in PD-MS² spectrum, its m/z could be predicted from those of y_n-H₃PO₄ and/or y_n-2H₃PO₄. Complete sequence coverage was possible when the data from PD-MS² and PD-MS³ were combined, demonstrating the utility of transient ion detection by PD-MS³ for structure analysis.     

Fast liquid chromatography separation and multiple‐reaction monitoring mass spectrometric detection of neurotransmitters

We describe here the fast LC‐MS/MS separation of a mixture of neurotransmitters consisting of dopamine, epinephrine, norepinephrine, 3,4‐dihydroxybenzylamine (DHBA), salsolinol, serotonin, and γ‐aminobutyric acid (GABA). The new UltiMate® 3000 Rapid Separation system (RSLC) was successfully coupled to the 4000 QTRAP mass spectrometer operating in multiple‐reaction monitoring (MRM) mode. The separation was attained using a 100 mm length, 2.2 μm particle size Acclaim column at a flow rate of 0.5 mL/min. The column back pressure was 350 bar, while the total run time including column re‐equilibration was 5.2 min. The peak resolution was minimally affected by the fast separation. The RSLC‐MRM separation was found to have a precision range based on peak area for 50 replicate runs of 2–5% CV for all analytes, and the reproducibility of the retention time for all analytes was found to range from 0–2% CV. The described method represents an almost seven times shorter analysis time of neurotransmitters using LC/MRM which is very useful in screening large quantities of biological samples for various neurotransmitters.     

Safety and Quality Aspects of Acrylic Monomers

Summary : Acrylic monomers are important intermediates for the chemical industry. Especially acrylic acid (AA) is the basis for various reactions, such as polymerizations and esterifications and is, therefore, responsible for high product diversity. Spontaneous polymerization is a safety problem during the transportation and storage of acrylic monomers. In the production process, polymerization leads to blockages in the apparatus. For the prevention of these issues, special stabilizer systems are used such as hydroquinone monomethyl ether (MeHQ)/oxygen and phenothiazine (PTZ). The reactions of these stabilizer systems are not well understood at the moment. Therefore a lot of expertise and experience are necessary to guarantee safe handling. In this paper some methods for the investigation of stability related reaction kinetics are presented. A better comprehension of the mechanism of the polymerization inhibition is generated by the kinetic simulation with these data.     

Multivariate quality control solved by one‐class partial least squares regression: identification of adulterated peanut oils by mid‐infrared spectroscopy

The Partial least squares class model (PLSCM) was recently proposed for multivariate quality control based on a partial least squares (PLS) regression procedure. This paper presents a case study of quality control of peanut oils based on mid‐infrared (MIR) spectroscopy and class models, focusing mainly on the following aspects: (i) to explain the meanings of PLSCM components and make comparisons between PLSCM and soft independent modeling of class analogy (SIMCA); (ii) to correct the estimation of the original PLSCM confidence interval by considering a nonzero intercept term for center estimation; (iii) to investigate the potential of MIR spectroscopy combined with class models for identifying peanut oils with low doping concentrations of other edible oils. It is demonstrated that PLSCM is actually different from the ordinary PLS procedure, but it estimates the class center and class dispersion in the framework of a latent variable projection model. While SIMCA projects the original variables onto a few dimensions explaining most of the data variances, PLSCM components consider simultaneously the explained variances and the compactness of samples belonging to the same class. The analysis results indicate PLSCM is an intuitive and easy‐to‐use tool to tackle one‐class problems and has comparable performance with SIMCA. The advantages of PLSCM might be attributed to the great success and well‐established foundations of PLS. For PLSCM, the optimization of model complexity and estimation of decision region can be performed as in multivariate calibration routines. Copyright © 2011 John Wiley & Sons, Ltd.