Synthesis and Structure of Dimolybdenum Carbonyl Thiolate Compound [Et4N]2[Mo2（CO）8（SC6H4—CH3—m）2]

1 INTRODUCTION In 1984, thiolate ligand was successfully introduced into molybdenum carbonyl compound by the reaction of Mo(CO)6 with [Et4N]SR( R = C6H5, But) in a moderate condition[1]. From then on, a series of dinuclear molybdenum(0) carbonyl thiolate compounds have been synthesized and characterized by using a variety of thiolate ligands in our research group. It was found that a planar Mo2S2 unit is in the compound [Et4N]2[Mo2(CO)8(SC6H4-CH_3-p)2][2] (2) and a "butterfly" t…     

Polyurethanes containing sulfur. III. New thermoplastic HDI-based segmented polyurethanes with diphenylmethane unit in their structure

Three series of new thermoplastic, high molecular weight, segmented thiopolyurethanes were synthesized by a one-step melt polymerization from newly obtained thiodiols, including bis[4-(2-hydroxyethyl)thiomethylphenyl]methane, bis[4-(3-hydroxypropyl)thiomethylphenyl]methane, and bis[4-(6-hydroxyhexyl)thiomethylphenyl]methane (BHHM), as chain extenders; hexamethylene diisocyanate; and 20–80 mol % poly(oxytetramethylene) glycol (PTMG; number-average molecular weight = 1000) as the soft segment. Solution polymerization with the chain extender BHHM gave considerably lower molecular weight polymers. The structures of all the polyurethanes were determined with Fourier transform infrared and X-ray diffraction analysis. The thermal properties of the polyurethanes were examined with differential scanning calorimetry and thermogravimetric analysis. Shore A/D hardness and tensile properties were also determined. All the polyurethanes showed partially crystalline structures; those obtained with 40–80 mol % PTMG were elastomers. An increase in the PTMG content decreased hardness, modulus of elasticity, and tensile strength, whereas elongation at break increased. BHHM-based polyurethanes obtained in the melt showed the best tensile properties. The polyurethanes exhibited definite glass transitions (−70 to −59 °C) that were nearly independent of the hard-segment content up to about 50 wt % (40–80 mol % PTMG), indicating the existence of mainly microphase-separated soft and hard segments. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 1733–1742, 2001     

光学元件激光预处理技术

国外学者用1064 nm激光对pickoff镜进行预处理,发现损伤阈值平均提高38.8%。国内研究者用CO2激光中度抛光后,熔石英基片的损伤阈值提到了30%左右,激光波长、扫描方式等对处理效果影响也比较明显。介绍了三种公认的预处理机制,将离线与在线处理方式做了简单地比较,并对国内外激光预处理技术的发展和前景进行了展望。     

Synthesis and structure of Mn(II) and Zn(II) complexes containing 1,10-phenanthroline unit

The Mn(II) and Zn(II) complexes of N,N′-diisopropyl-1,10-phenanthroline-2,9-dimethanamine have been synthesised, and the structure of the two complexes have been studied by X-ray crystallography.     

The synthesis,characterization, and weathering behavior of polycarbonates derived from bis(P-hydroxyphenyl) dimethylsilane (BPSI)

Polycarbonates and copolycarbonates based on BPSi and BPA were easily made using the standard interfacial technique. Molecular weight and NMR data indicate that up to 4 mol % of the BPSi decomposes during polymerization via a base-catalyzed rearrangement of BPSi to arylsiloxanes. Oxygen index studies show an increased flame resistance with increasing BPSi monomer content. DSC measurements show a decrease in glass transition with BPSi monomer concentration while TGA shows an increase in char residue with BPSi monomer content. In addition, TGA indicates no change in either thermal or thermooxidative stability with the relative BPSi/BPA concentrations. Outdoor weathering of BPSi PC and BPA PC films indicates that BPSi PC is ca. 5 times more weathering resistant than BPA PC. This latter result can be attributed to a combination of BPSi PC's lower UV absorptivity, higher water repellency, and lower likelihood for side chain photooxidation. © 1993 John Wiley & Sons, Inc.     

Sampling and sample-preparation strategies based on solid-phase microextraction for analysis of indoor air

Applications of solid-phase microextraction (SPME) to the sampling and analysis of volatile organic compounds in indoor air are reviewed, including a summary of quantification methods, coatings, compounds, concentrations, sampling locations and times, and detection limits. Strategies for on-site and off-site sampling and analysis, advantages and challenges associated with SPME for air sampling are discussed.     

722型光栅分光光度计单色器故障及解决方法

运用仪器的光学系统原理,对偶然出现的单色器故障进行分析,总结出一套切实可行的解决方法。     

Carbon Dioxide as an Alternative C1 Synthetic Unit: Activation by Transition-Metal Complexes

The carbon dioxide molecule has been of limited importance as a synthetic unit in organic chemistry. When it is coordinated to transition metals, however, completely new possibilities arise; CO₂ can bond to metal complexes in a variety of ways and can enter into insertion and coupling reactions, or become catalytically attached to other substrates. The formation of C? C bonds between carbon dioxide and unsaturated hydrocarbons under conditions of homogeneous catalysis makes available new synthetic routes to industrially interesting organic compounds.     

Analysis of heavy organic pollutants of confined atmospheres

Summary An improved procedure for the determination of the less volatile air pollutants of recycled closed atmospheres by activated carbon-Soxhlet extraction is proposed. After total treatment of desorbate, PAH determination is then accomplished by RP-HPLC using both adsorptiometric and fluorimetric UV detection; phenolic compounds are determined by GC-MS.This technique is suitable for very low levels of PAH and phenolic compounds.     

Sequential injection methodology for carbon speciation in bathing waters

A sequential injection method (SIA) for carbon speciation in inland bathing waters was developed comprising, in a single manifold, the determination of dissolved inorganic carbon (DIC), free dissolved carbon dioxide (CO₂), total carbon (TC), dissolved organic carbon and alkalinity. The determination of DIC, CO₂ and TC was based on colour change of bromothymol blue (660 nm) after CO₂ diffusion through a hydrophobic membrane placed in a gas diffusion unit (GDU). For the DIC determination, an in-line acidification prior to the GDU was performed and, for the TC determination, an in-line UV photo-oxidation of the sample prior to GDU ensured the conversion of all carbon forms into CO₂. Dissolved organic carbon (DOC) was determined by subtracting the obtained DIC value from the TC obtained value. The determination of alkalinity was based on the spectrophotometric measurement of bromocresol green colour change (611 nm) after reaction with acetic acid. The developed SIA method enabled the determination of DIC (0.24–3.5 mg C L⁻¹), CO₂ (1.0–10 mg C L⁻¹), TC (0.50–4.0 mg C L⁻¹) and alkalinity (1.2–4.7 mg C L⁻¹ and 4.7–19 mg C L⁻¹) with limits of detection of: 9.5 μg C L⁻¹, 20 μg C L⁻¹, 0.21 mg C L⁻¹, 0.32 mg C L⁻¹, respectively. The SIA system was effectively applied to inland bathing waters and the results showed good agreement with reference procedures.