Optimal dynamic advertising policies for hereditary processes

In this paper, the Nerlove-Arrow model of optimal dynamic advertising policies is generalized by assuming a general probability distribution of the forgetting time, rather than the exponential one. A control problem with integrodifferential equations of motion is defined for which the transitory and steady-state properties of the optimal advertising policy are examined. The effects of assumptions like IHR-distributions and DHR-distributions, the existence of an upper bound for the forgetting time, etc., are explained. It is shown that there are two (in the case of an exponential distribution even three) different current-value adjoint functions associated with the problem, and relations between the two (three) are established. Also provided is a sensitivity analysis.Thanks are due to G. Feichtinger and S. Jorgensen for useful discussions.     

On the minimal time function for distributed control systems in Banach spaces

In this paper, it is shown that the minimal time function is locally Lipschitz continuous for the control systemx=Ax+u in a Banach spadeE, under either of two conditions:A is linear and generates aC ₀-semigroup of bounded linear operators; orA is nonlinear, possibly multivalued, and dissipative. The main tool used for the nonlinear case is a result of Barbu concerning the null controllability of the system.     

氧化锌微晶的制备和形貌控制

本文在溶液体系中合成了多种形貌的氧化锌(ZnO)微晶。所得花状、雪花状、棒状、多刺球状和棱柱状氧化锌微晶用粉末X射线衍射(XRD)和扫描电镜(SEM)进行了鉴定和表征,考察了反应条件如溶剂、温度及pH值对ZnO微粒尺寸和形貌的影响,初步探讨了不同形貌ZnO微粒的生长机理。该文对制备形貌可控的氧化物具有一定的指导意义。     

Analysis of heavy organic pollutants of confined atmospheres

Summary An improved procedure for the determination of the less volatile air pollutants of recycled closed atmospheres by activated carbon-Soxhlet extraction is proposed. After total treatment of desorbate, PAH determination is then accomplished by RP-HPLC using both adsorptiometric and fluorimetric UV detection; phenolic compounds are determined by GC-MS.This technique is suitable for very low levels of PAH and phenolic compounds.     

The state of conservation of painted surfaces in the presence of accelerated ageing processes monitored by use of FT-Raman spectroscopy and multivariate control charts

A new method has been developed for monitoring the degradation of paintings. Two inorganic pigments (ultramarine blue and red ochre) were blended with linseed oil and spread on canvas. Each canvas was subjected to simulated accelerated ageing in the presence of typical degradation agents (UV radiation and acidic solution). Periodically the painted surfaces were analysed by FT-Raman, to investigate the status of the surface. The data obtained were analysed by principal component analysis (PCA). Finally the Shewhart and cumulative sum control charts based on the relevant principal components (PC) and the so called scores monitoring and residuals tracking (SMART) charts were built. The method based on the use of PC to describe the process was found to enable identification of the presence of relevant modification occurring on the surface of the samples studied.Electronic supplementary material Supplementary material is available for this article at     

On guaranteed stability of uncertain linear systems via linear control

This paper addresses the problem of stabilizing an uncertain linear system. The uncertaintyq(·) which enters the dynamics is nonstistical in nature. That is, noa priori statistics forq(·) are assumed; only boundsQ on the admissible variations ofq(·) are taken as given. The results given here applied to so-called matched systems differ from previous results in two ways. Firstly, the stabilizing control in this paper is linear; for this same class of problems, many of the existing results would require a nonlinear control. Furthermore, those results which do in fact yield linear controls are only valid when a certain matrix (q) (formed using the given data) is negative definite for allq Q. In contrast, the theory given here only requires compactness of the bounding setQ. Secondly, we show that the so-called matching conditions (used in earlier work) can be generalized so as to encompass a larger class of dynamical systems.This research was supported by the US Department of Energy under Contract No. ET-78-S-01-3390.     

A quality systems approach for identifying and controlling sources of error with point of care testing devices

Historically, due to the size and nature of the instrumentation, highly skilled laboratory professionals performed clinical testing in centralized laboratories. Today’s clinicians demand realtime test data at the point of care. This has led to a new generation of compact, portable instruments permitting ”laboratory” testing to be performed at or near the patient’s bedside by nonlaboratory workers who are unfamiliar with testing practices. Poorly controlled testing processes leading to poor quality test results are an insidious problem facing point of care testing today. Manufacturers are addressing this issue through instrument design. Providers of clinical test results, regardless of location, working with manufacturers and regulators must create and manage complete test systems that eliminate or minimize sources of error. The National Committee for Clinical Laboratory Standards (NCCLS) in its EP18 guideline, ”Quality management for unit-use testing,” has developed a quality management system approach specifically for test devices used for point of care testing (POCT). Simply stated, EP18 utilizes a ”sources of error” matrix to identify and address potential errors that can impact the test result. The key is the quality systems approach where all stakeholders – professionals, manufacturers and regulators – collaboratively seek ways to manage errors and ensure quality. We illustrate the use of one quality systems approach, EP18, as a means to advance the quality of test results at point of care. Received: 26 June, 2002 Accepted: 17 July 2002 Presented at the European Conference on Quality in the Spotlight in Medical Laboratories, 7–9 October 2001, Antwerp, Belgium Abbreviations NCCLS National Committee for Clinical Laboratory Standards (formerly) · POCT point of care testing · QC quality control · HACCP hazard analysis critical control points · CLIA clinical laboratory improvement amendments (of 1988) Correspondence to S. S. Ehrmeyer     

Determination of airborne isocyanates as di-n-butylamine derivatives using liquid chromatography and tandem mass spectrometry

A method for the determination of isocyanates as di-n-butyl amine (DBA) derivatives using tandem mass spectrometry (MS/MS) and electrospray ionisation (ESI) is presented. Multiple-reaction monitoring (MRM) of the protonated molecular ions and corresponding deuterium-labelled d₉-DBA derivatives resulted in selective quantifications with correlation coefficients >0.998 for the DBA derivatives of isocyanic acid (ICA), methyl isocyanate (MIC), ethyl isocyanate (EIC), propyl isocyanate (PIC), phenyl isocyanate (PhI), 1,6-hexamethylene diisocyanate (HDI), 2,4-, 2,6-toluene diisocyanate (TDI), isophorone diisocyanate (IPDI), 4,4′-methylenediphenyl diisocyanate (MDI), 3-ring MDI, 4-ring MDI, HDI-isocyanurate, HDI-diisocyanurate, HDI-biuret and HDI-dibiuret. The instrumental precision for 10 repeated injections of a solution containing 0.1 μg ml⁻¹ of the studied derivatives was <2%. Performing MRM of the product ion [DBA + H]⁺ (m/z = 130) from the protonated molecular ion resulted in the lowest detection limits, down to 10 amol (for TDI). Quantification of concentrations below 10⁻⁶ of the occupational exposure limit (OEL) for TDI during 10 min of air sampling was made possible. In an effort to control the formation of alkali adducts, addition of lithium acetate to the mobile phase and monitoring of lithium adducts was evaluated. Having lithium present in the mobile phase resulted in complete domination of [M + Li]⁺ adducts, but detection limits for the studied compounds were not improved. Different deuterium-labelled derivatives as internal standards were evaluated. (1) DBA derivatives of deuterium-labelled isocyanates (d₄-HDI, d₃-2,4-TDI, d₃-2,6-TDI and d₂-MDI), (2) d₉-DBA derivatives of the corresponding isocyanates and (3) d₁₈-DBA derivatives of the corresponding isocyanates. An increase in number of deuterium in the molecule of the internal standard resulted in an increase in instrumental precision and a decrease in correlation within calibration series.     

Measurement uncertainty and the use of reference materials

The use of (certified) reference materials and quality control materials can form a suitable basis for evaluating measurement uncertainty of routine measurements. In particular when these materials are used for quality control purposes, it is not always evident how the quality control data can be used in the uncertainty budget of a routine measurement. Current guidance documents on the evaluation of measurement uncertainty and the use of reference materials treat this subject only in part, or in very generic terms. ISO/REMCO has established a new working group that will provide practical guidance and examples on how to use quality control data in the evaluation of measurement uncertainty. A short introduction to the subject is given.

指纹图谱法在参麦注射液质控中的应用

 中医药理论和实践要求综合评价中药的质量 ,指纹图谱法是对中药制剂进行综合宏观分析的可行手段之一 ,因此采用反相高效液相建立了参麦注射液的特征指纹图谱。条件 :Hypersil C18(4 6mmi d × 2 5 0mm ,5 μm)反相柱 ,流动相由水 (A)和乙腈 (B)组成 ,B的体积分数在 5 0min内由 5 %线性增长到 95 % ,流速为1 0mL/min ;紫外检测 ,波长为 2 0 2nm。 2 3个特征指纹峰与内标 (联苯 )的峰面积比作为指标 ,结合主成分分析 投影判别法比较了同一厂家不同批次产品和不同厂家同类产品的化学指纹差异。