Set controllability of Markov jump switching Boolean control networks and its applications

In this article, a novel method is proposed for investigating the set controllability of Markov jump switching Boolean control networks (MJSBCNs). Specifically, the switching signal is described as a discrete-time homogeneous Markov chain. By resorting to the expectation and switching indicator function, an expectation system is constructed. Based on the expectation system, a novel verifiable condition is established for solving the set reachability of MJSBCNs. With the newly obtained results on set reachability, a necessary and sufficient condition is further derived for the set controllability of MJSBCNs. The obtained results are applied to Boolean control networks with Markov jump time delays. Examples are demonstrated to justify the theoretical results.     

Event-triggered sliding mode control for switched genetic regulatory networks with persistent dwell time

This paper focus on the event-triggered sliding mode controller design for discrete-time switched genetic regulatory networks (GRNs) with persistent dwell time (PDT) switching. Firstly, the observation error dynamics of switched GRNs with PDT is constructed in the light of event-triggered sliding mode control (SMC) scheme. Next, sufficient conditions are derived to ensure the exponential stability of the augmented plant. Moreover, an event-triggered SMC law is synthesized to impel the system trajectories onto the sliding surface in a finite time. Finally, a verification example is provided to illustrate the effectiveness and potential of the proposed method.     

Sampled-data minimumH ∞-norm regulation of linear continuous-time systems using multirate-output controllers

This paper deals with the problem of designing multirate-output contrlleers for sampled-dataH -optimal control of linear continuous-time systems. Two formulations of the problem are studied. In the first, the intersample behavior of the disturbance and the controlled output signals is not considered, whereas in the second the continuous-time nature of these signals is taken into account. It is shown that, in both cases and unter appropriate conditions, it is plausible to reduce the repective initial problem to an associated discrete-timeH -optimization problem for which a fictitious static state feedback controller is to be designed. This fact has a beneficial influence on the theoretical and numerical complexity of the problem, since only one algebraic Riccati equation is to be solved here, as compared to two algebraic Riccati equations needed in known techniques concerning theH -optimization problem with dynamic measurement feedback.The work described in this paper has been partially funded by the General Secretariat for Research and Technology of the Greek Ministry of Industry, Research, and Technology and by the Heracles General Cement Company of Greece.     

Controllability of the wave equation with moving point control

This paper deals with approximate and exact controllability of the wave equation in finite time with interior point control acting along a curve specified in advance in the system's spatial domain. The structure of the control input is dual to the structure of the observations which describe the measurements of velocity and gradient of the solution of the dual system, obtained from the moving point sensor. A relevant formalization of such a control problem is discussed, based on transposition. For any given timeinterval [0,T] the existence of the curves providing approximate controllability inH _D ^–[n/2]–1 ()×H _D ^–[n/2]–1 () (wheren stands for the space dimension) is established with controls fromL ²(0,T; R ⁿ +1). The same curves ensure exact controllability inL ²() × H^–1() if controls are allowed to be selected in [L (0,T; R ⁿ+1)]. Required curves can be constructed to be continuous on [0,T).This work was supported in part by NSF Grant ECS 89-13773 and NASA Grant NAG-1-1081.     

Evaluation of micellar liquid chromatography and capillary zone electrophoresis for dope control in sport

Micellar liquid chromatography (MLC) and capillary zone electrophoresis (CZE) have been evaluated for the analysis of twelve banned drugs in sport including diuretics and -blockers. In MLC, a sodium dodecylsulphate aqueous solution has been used as mobile phase using an octadecylsilica column. In CZE, a pH 8 buffer solution and a silica capillary have been employed. Parameters of retention and efficiency have been compared. Limits of detection with UV detection at 254 nm and relative standard deviations for atenolol, furosemide, nadolol, spironolactone and triamterene were established and compared in both techniques. Examples of direct urine injection into the separation systems are presented. Drugs overlapping in MLC are well resolved in CZE, while the opposite is true for a limited number of drugs. Some interferences from urine may arise in CZE. The selectivity of analysis would be greatly enhanced by using both techniques, which require only filtration as pre-treatment.     

Langevin dynamic simulation of hysteresis in a field-swept Landau potential

Numerical simulations are done of Langevin dynamics for a uniform-orderparameter, field-swept Landau model,= –|a/2|m ²+|b/4|m ⁴–mh(t) , to study hysteresis effects. The field is swept at a constant rateh(t)=h(0)+ht. The stochastic jump values of the field {h_J from an initially prepared metastable minimumm(0) are recorded, on passage to a global minimum m(). The results are: (a) The mean jump¯h _J(h) increases (hysteresis loop widens) with h, confirming a previous theoretical criterion based on rate competition between field-sweep and inverse mean first-passage time (FPT); (b) The broad jump distribution(h _J,h) is related to intrinsically large FPT fluctuations ( ²–²)/ ² O(1), and can be quantitatively understood. Possible experimental tests of the ideas are indicated.     

聚四氟乙烯微胞孔膜的结构和表征

使用多种方法制备了聚四氟乙烯微胞孔膜，以扫描电子显微镜、化学分析电子能谱及鼓泡测孔径法表征，结果表明，通过等离子体聚合，乙烯－四氟乙烯枝沉淀于基体膜上的方法能可控地获得良好的表征。     

Rapid dissolution procedure for base-metals-bearing complex materials for quality control assessment

A less labour-intensive method, involving a mixture of 1.0 g MnO₂ + 20 mL HCl (11), is proposed for decomposing seven ores and six metallurgical products for accurate and precise estimation of copper, lead, zinc, cobalt and nickel for quality control assessment. Twentyone international reference materials were also analysed. Results of regression analyses are presented and intermethod comparison studies reveal that the probability of results being different compared with a reference method was less than 1%. Sample decomposition is straightforward and the method has been found to be very simple, rapid and easily adaptable, as it involves no separation of the analyte from the matrix elements.     

Quality assurance and statistical control

In scientific research laboratories it is rarely possible to use quality assurance schemes, developed for large-scale analysis. Instead methods have been developed to control the quality of modest numbers of analytical results by relying on statistical control: Analysis of precision serves to detect analytical errors by comparing thea priori precision of the analytical results with the actual variability observed among replicates or duplicates. The method relies on the chi-square distribution to detect excess variability and is quite sensitive even for 5–10 results. Interference control serves to detect analytical bias by comparing results obtained by two different analytical methods, each relying on a different detection principle and therefore exhibiting different influence from matrix elements; only 5–10 sets of results are required to establish whether a regression line passes through the origo. Calibration control is an essential link in the traceability of results. Only one or two samples of pure solid or aqueous standards with accurately known content need to be analyzed. Verification is carried out by analyzing certified reference materials from BCR, NIST, or others; their limited accuracy of 5–10% make them less suitable for calibration purposes.     

High solids content emulsion terpolymerization of vinyl acetate,methyl methacrylate and butyl acrylate. II. Open loop composition control

A method for the calculation of the optimal monomer addition policies for polymer composition control in emulsion terpolymerization is developed. The method is applied to reactors with and without limited heat removal capacity. A mathematical model that incorporates the main features of the vinyl acetate/methyl methacrylate/butyl acrylate high solids content emulsion terpolymerization system allows the calculation of the composition of the initial charge of the reactor and the time-dependent monomer addition rates required. © 1994 John Wiley & Sons, Inc.