First radical cation salts of 2,5-bis(1,3-dithian-2-ylidene)-1,3,4,6-tetrathiapentalene (BDA-TTP) with copper(II) metal complex anions: β-(BDA-TTP)4Cu2Cl6 and (BDA-TTP)2CuCl4

New radical cation salts based on 2,5-bis(1,3-dithian-2-ylidene)-1,3,4,6-tetrathiapentalene (BDA-TTP) with copper(II) metal complex anions, β-(BDA-TTP)₄Cu₂Cl₆ and (BDA-TTP)₂CuCl₄, were synthesized and structurally characterized. Single crystals were prepared by electrochemical oxidation of BDA-TTP under galvanostatic conditions. X-ray diffraction study demonstrated that the salts have a layered structure, in which the conducting BDA-TTP layers alternate with the [Cu₂Cl₆]²⁻ or [CuCl₄]²⁻ anions. Both salts show the semiconductor-type temperature dependence of the conductivity. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 1, pp. 48–54, January, 2007.     

纳米TiO2膜用于光催化氧化测定化学需氧量的研究

A photocatalytic oxidation method for determination of chemical oxygen demand （COD） using nano-TiO2 film, based on the use of a nano-TiO2-Ce（SO4）2 system and electrochemical detection, was proposed. The technique was originated from the direct determination of the Ce（Ⅲ） concentration change resulting from photocatalytic oxidation of organic compounds. Ce（Ⅲ）, which was produced by photocatalytic reduction of Ce（SO4）2, could be measured at a multi-walled carbon nanotubes （MWNT） chemically modified electrode （CME）. The COD values by this method were calculated from the differential pulse voltammetry （DPV） current of Ce（Ⅲ） at the CME. Under the optimal operation conditions, the detection limit of 0.5 mg·L^-1 COD with the linear range of 1-600 mg·L^-1 was achieved. This method was also applied to determination of various COD of ground water and wastewater samples. The resuits were in good agreement with those from the conventional COD methods, i.e., permanganate and dichromate ones.     

Selective oxidation of octadecan-1-ol to octadecanoic acid over Co3O4/SiO2 catalysts

Factors (reaction temperature, reaction time, flow rate of oxygen, amount of catalyst, etc.) influencing the catalytic properties of Co₃O₄/SiO₂catalyst in the oxidation octadecan-1-ol to octadecanoic acid were investigated. The catalysts were characterized by means of XRD, FT-IR and N₂-adsorption. The experimental results indicate that under the optimal condition the selectivity to octadecanoic acid reached 97.5 % over 5 % Co₃O₄/SiO₂ catalyst.This revised version was published online in December 2005 with corrections to the Cover Date.     

CO Oxidation on Cu/MgO-SiO2 Sol-Gel Derived Catalysts

Sol-gel Cu//MgOSiO₂ catalysts were prepared gelling tetraethoxysilane (TEOS), magnesium ethoxide and copper acetylacetonate at pH 3 and pH 9. The catalysts shown specific surface areas ca. 500 m²/g and 140 m²/g for pH 9 and pH 3 preparations respectively. Si(OH) and Si(OH)₂ hydroxy groups were observed by MAS-RMN spectroscopy in both preparations. CO₂-TPD and NH₃-TPD desorption thermograms showed that acid and basic sites were formed on the catalysts surface. It has been found that the catalysts having the highest density of basic sites were the catalysts showing the highest activity for the CO oxidation. It is proposed that the catalytic activity depends of the relative Cu⁼¹/Cu⁼² stability given by the support acidity.     

Vacuum-ultraviolet induced oxidation of the polymers polyethylene and polypropylene

The emission from low-pressure microwave plasmas in the vacuum-ultraviolet (VUV) region (λ < 200 nm) was investigated in order to use these plasmas as light sources for the study of the VUV photochemistry of polyethylene (PE) and polypropylene (PP) as part of the study of plasma-polymer interaction. These polymers, immersed in low-presure oxygen, were exposed to radiation with wavelengths down to 112 nm, the cut off of magnesium fluoride used as a window to separate the polymer specimen from the plasma light source. Total oxygen incorporation in the surface [O], and the formation of hydroxyl, carbonyl, and carboxyl groups were measured using XPS in combination with chemical derivatizations, particularly their dependence upon the radiation spectrum and the oxygen pressure around the sample. In most experiments the surface oxygen concentration [O] attained a constant value that appears to be related to the initial oxidation rate; this suggests a competition between oxygen incorporation and chain scission reactions, followed by the removal of volatile oxidation products. PE is usually oxidized to a higher level than PP, the latter appearing to be more susceptible to reaction with atomic oxygen than PE. A general initiation mechanism for the VUV experiments is proposed that allows us to explain the observed differences in behavior between PE and PP, and the results obtained under different irradiation conditions. The nature of oxidation products is in both cases very similar to what is observed after direct plasma treatment of the polymers. We conclude that short wavelength radiation contributes very appreciably to the observed surface modification effects during plasma treatment of PE and PP. © 1995 John Wiley & Sons, Inc.     

Additive telluromolybdates. Structure and catalysis in oxidation

Additive telluromolybdates, MoO₃·2TeO₂ and M^IIO·TeO₂·MoO₃ (M^IITeMoO₆; M^II = Co, Mn, Zn), converted ethyl lactate selectively to pyruvate in a vaporphase fixedbed flow system at 250–300 °C. A synergy in activity was observed for binary TeO₂–MoO₃, and crystalline Te₂MoO₇ was suggested as the active species. The Rietveld analysis of powder XRD patterns of ternary CoTeMoO₆ revealed the layer structure quite different from that of the reference Te₂MoO₇, but tellurium was again located adjacent to molybdenum linked through lattice oxygen.     

Polyfluorinated hydrazones in organic synthesis

A preparative one-step method for the synthesis of 1,1,1,5,5,5-hexafluoro-4-trifluoromethylpentane-2,3-dione dihydrazone from perfluoro-4-methylpent-2-ene and hydrazine hydrate has been developed. Oxidation of this dihydrazone with bromine in water gives 3-diazo-1,1,1,5,5,5-hexafluoro-4-trifluoromethylpentane-2-one. The same product is obtained from 3-hydrazono-1,1,1,5,5,5-hexafluoro-4-trifluoromethylpentane-2-one under similar conditions.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 11, pp. 2039–2041, November, 1994.This work was supported by the Russian Foundation for Basic Research (the project code 94-03-08548).     

Redox properties of rhodium diene-cyclopentadienyl complexes

The electrochemical behavior of rhodium sandwich complexes containing η⁴-pentamethylcyclopentadiene or tetramethylfulvene fragments has been studied by cyclic voltammetry. The complexes undergo one-electron oxidation to give unstable 17-electron radical cations which are converted into rhodocenium salts as a result of elimination or uptake of hydrogen or C-C bond cleavage. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 10, pp. 1802–1805, October, 1993.     

Oxidation of 1-methylcyclobutanol by Pb(IV) and Mn(III) compounds

The main product of the reaction of 1-methylcyclobutanol with Pb(OAc)₄ in benzene is 1-phenyl-4-pentanone; the use of Mn(OAc)₃ in acetic acid gives a mixture of 2,9-decanedione and methyl propyl ketone; 1-(chloro-, bromo-, thiocyano-, or cyano)-4-pentanone is formed in the presence of the systems Pb(OAc)₄-metal halide or Mn(OAc)₃-metal halide.N. D. Zelinskii Institute of Organic Chemistry, Russian Academy of Sciences, 117913 Moscow. Translated fromIzvestiya Akademii Nauk, Seriya Khimicheskaya, No. 12, pp. 2760–2763, December, 1992.     

Regio- and stereoselectivities in Diels-Alder cyclodimerizations of orthoquinonoid cyclohexa-2,4-dienones

The [4+2] cyclodimerization of cyclohexa-2,4-dienone derivatives of the orthoquinone monoketal and orthoquinol types has been the topic of numerous investigations over the last 50 years in the aim of rationalizing the extraordinary level of regio-, site-, and stereoselectivities observed in these processes. In particular, the double diastereo-π-facial differentiation expressed in cyclodimerizations of chiral orthoquinols (i.e., 6-alkyl-6-hydroxycyclohexa-2,4-dienones) is an important aspect of these transformations, for they relate to the construction of several natural products. The experimental and theoretical results that are described in this article offer a comprehensive understanding of the factors controlling these site-specific regio- and diastereoselectivities. Our interpretation of these results relies on a combination of Woodward-Hoffmann and Salem-Houk secondary orbital interactions and Cieplak-type hyperconjugative effects in bispericyclic C₂-symmetric transition states.