Sorption of Sb(III) on carbon steel surface in presence of molybdate and selenite in citric acid medium

Sorption of Sb(III) on carbon steel surface in aqueous medium (pH 2.8) in presence of different oxyanions like molybdate and selenite has been studied. It is observed that the presence of molybdate or selenite in solution reduced Sb(III) adsorption and surface precipitation to a great extent. The solution at different stages of the adsorption experiment has been analyzed by inductively coupled plasma-atomic emission spectroscopy technique. X-ray diffraction and X-ray photoelectron spectroscopy (XPS) techniques have been used to characterize the precipitate layer and the adsorbed layer. A detailed analysis of the XPS data reveals the mechanism involved in the two cases.     

Gasification characteristics of woody biomass in the packed bed reactor

Gasification technology is recognized as one of the possibilities for utilizing biomass effectively. This study focused on woody biomass gasification fundamentals, using a bench-scale packed-bed reactor. In this experiment, pellets of black pine were gasified, using air as the oxidizing agent. Gasification tests were carried out under both updraft and downdraft conditions. Temperature distributions and compositions of syngas inside the gasifier were continuously monitored during gasification experiments at several ports on the wall of the reactor. The syngas at the exit of the gasifier was also sampled to estimate the amount of tar. Lower heating values of the syngas under updraft and downdraft conditions were 4.8 and 3.8 MJ/m³N, respectively. It was easier to control the height of the packed bed under the downdraft condition than under the updraft condition. Under the updraft condition, a bridging phenomenon occurred. Tar generation under the downdraft condition was lower than that under the updraft condition. This is because tar passes through a partial combustion zone or higher temperature zone in the downdraft gasifier.     

Investigation on densification of Al2O3/B4C ceramic by ab initio calculation and experiment

Compared to experiment, the adsorption energies, bonding properties, and electronic structure of two different Al₂O₃/B₄C bridge sites with seven different Al₂O₃ surfaces are investigated by ab initio periodic density functional theory. The Al₂O₃/B₄C ceramic sintered in Ar is synthesized and measured by XRD and TEM. The calculated results reveal that the densification of O_bridge site of Al₂O₃/B₄C surface is better than that of Al_bridge. The Al₂O₃ (1 1 3)/B₄C with O_bridge is the most favorable and stable. The electronic structure shows that the electron hybridization exists between Al, O atoms and C, B atoms. The results indicate that the calculated results are in good agreement with the experiment.     

粉末活性炭对模拟间苯二酚废水的吸附

在静态条件下,研究了粉末活性炭对间苯二酚废水的吸附效果,通过实验优化了吸附条件,并在最佳处理效果下探究其吸附模式。结果表明,当水样pH值为4,温度30℃,活性炭用量0.3g,振荡时间10m in,振荡速率为120r/m in时,对废水的处理效果最佳。拟合得到活性炭吸附间苯二酚的模式符合F reund lich吸附模式。     

Adsorption and reactions of ethanol on Mo2C/Mo(1 0 0)

The adsorption, desorption and dissociation of ethanol have been investigated by work function, thermal desorption (TPD) and high resolution electron energy loss (HREELS) spectroscopic measurements on Mo₂C/Mo(1 0 0). Adsorption of ethanol on this sample at 100 K led to a work function decrease suggesting that the adsorbed layer has a positive outward dipole moment By means of TPD we distinguished three adsorption states, condensed layer with a Tp = 162 K, chemisorbed ethanol with Tp = 346 K and irreversibly bonded species which decomposes to different compounds. These are hydrogen, acetaldehyde, methane, ethylene and CO. From the comparison of the Tp values with those obtained following their adsorption on Mo₂C it was inferred that the desorption of methane and ethylene is reaction limited, while that of hydrogen is desorption limited process. HREEL spectra obtained at 100 K indicated that at lower exposure ethanol undergoes dissociation to give ethoxy species, whereas at high exposure molecularly adsorbed ethanol also exists on the surface. Analysis of the spectral changes in HREELS observed for annealed surface assisted to ascertain the reaction pathways of the decomposition of adsorbed ethanol.     

Self-assembly of 2,6-dimethylpyridine on Cu(1 1 0) directed by weak hydrogen bonding

Sequential stages of formation of a self-assembled monolayer of flat-lying 2,6-dimethylpyridine molecules on a single crystal Cu(1 1 0) surface have been observed by low-temperature scanning tunneling microscopy (LT-STM). At an adsorption temperature of 10 K, all of the molecules are randomly distributed at low coverage upon adsorption. The isolated molecules align their molecular axes parallel to the 〈0 0 1〉 azimuth of the Cu lattice. The nitrogen atom in the molecule is located at the four-fold hollow site. Upon annealing to 100 K, the molecules associate to form head-to-head dimers. The dimer units involve a pair of weak hydrogen bonds between methyl group-hydrogen atoms and N moieties on adjacent molecules, forming a core structure for further growth. In a later stage of self-assembly, single head-to-tail weak hydrogen bonds between ring C-H bonds and N moieties form in chains on the periphery of the central cores, leading to larger domains with a c(6 × 2) overlayer structure.     

A valence band photoemission study of Pb adsorption on Rh(1 0 0) and Rh(1 1 0)

We have studied the adsorption of Pb on the Rh(1 0 0) and (1 1 0) surfaces by photoemission and low energy electron diffraction (LEED), and tested the chemical properties by adsorption of CO. Pb forms two distinct c(2 × 2) phases on Rh(1 0 0), according to the temperature of the substrate. The phase formed below about 570-620 K, denoted α-c(2 × 2), reduces the coverage of adsorbed CO but does not affect the valence band spectrum of the molecule. The phase formed above this temperature, denoted β-c(2 × 2), also reduces the coverage of adsorbed CO but the valence band spectrum of the adsorbed CO is strongly affected. The two phases are also characterised by a slightly different binding energy of the Pb 5d_5/2 level, 17.54 eV for the α phase and 17.70 for the β phase. The Pb/Rh(1 1 0) surface shows two ordered Pb induced phases, c(2 × 2) and p(3 × 1). CO adsorbs on the first with reduced heat of adsorption and with a valence band spectrum that is strongly altered with respect to CO adsorbed on clean Rh(1 1 0), but does not adsorb on the p(3 × 1) structure at 300 K. We compare the present results with previous results from related systems.     

Influence of pretreatment methods on adsorption and catalytic characteristics of toluene over heterogeneous palladium based catalysts

The adsorption and catalytic characteristics of heterogeneous palladium based catalyst and its modified catalysts with gases (air and hydrogen) and acidic aqueous solution (HCl) were studied for evaluating the influence of pretreatment methods for toluene. The structural and energetic adsorption properties of the parent and pretreated catalysts were analyzed by means of nitrogen adsorption isotherms and gravimetric methods. The light-off curve and the XPS investigation were used for analyzing the catalytic activity and the surface state of palladium. It was clearly shown from the experimental results that hydrogen pretreated catalysts having metallic surface state exhibited the highest adsorption capacity and catalytic activity compared to that of parent and modified catalysts. The adsorption equilibrium data for toluene were obtained at three different temperatures and correlated successfully with the two-site Langmuir molecular isotherm model (L2m). It was also found that the palladium phase has more adsorption affinity for toluene molecules than the alumina support. The isosteric heat of adsorption calculated by using the Clausius-Clapeyron equation significantly changed with the coverage and the lateral interactions between the adsorbate-adsorbate molecules control the system. Furthermore, comparative analysis of the adsorption energy distribution revealed that the parent and its modified catalysts have different types of surface energetic heterogeneities.     

Atomistic simulation of sorption in model pores with reduced spatial periodicity

Grand Canonical Monte Carlo (GCMC) was used to study the sorption thermodynamics of carbon dioxide in model graphite slit-like pores and nanotubes by means of the Ewald technique, suitably adapted for the computation of long range (electrostatic) interactions of sorbates confined in pore systems exhibiting reduced periodicity in space. The computed thereby micropore size distributions extracted via mathematical elaboration of the simulation results with respect to real graphitic materials, reproduced successfully the experimentally measured isotherms of carbon dioxide in these materials at various temperatures. In the case of nanotubes, a direct Coulomb summation over a large number of periodic images proved to be a sufficient approximation leading to excellent agreement between the simulated and measured isotherms.     

季铵盐改性四钛酸钾晶须及其吸附性能

通过季铵盐改性四钛酸钾晶须,应用X射线衍射分析、红外光谱,紫外-可见漫反射光谱对改性前后的四钛酸钾晶须进行表征,并初步研究了不同季铵盐改性的四钛酸钾晶须对苯酚吸附性能的研究。实验结果表明,改性前后的四钛酸钾晶须在紫外光区均有较强的光吸收,而在可见光区其吸收则较弱。改性前后四钛酸钾晶须的结构没有改变,季铵盐能够进入层状化合物的层板间,使改性后的层间距稍微增大。与改性前相比,改性后的四钛酸钾晶须对苯酚的吸附量和吸附率有了明显的提高。