Helical Biphenyl Bisazo Polyurethane: Preparation,Characterization and Analysis of Polymeric Thermo-Optic Switch

The bisazo chromophore molecule (CAAPM) and helical biphenyl bisazo polyurethane (HBBPU) were synthesized. The structures of CAAPM and HBBPU were characterized by FT-IR and UV-vis spectroscopic techniques. The measurements of refractive index and thermo-optic coefficient (dn/dT) of HBBPU were demonstrated at different wavelengths and different temperatures by the ATR technique. By using CCD digital imaging devices, transmission loss of the internal waveguide was measured. The refractive index dispersions and Sellmeyer coefficients of HBBPU were obtained by the Sellmeyer equation. A Y-branched switch based on the thermo-optic effect was proposed and the performance of the switch was simulated. With a branching angle of 0.143° and the FD-BPM method, the result showed that the power consumption of the thermo-optic switch could be only 3.6 mW, and the response time of the switch could reach about 8 ms. This is a significant improvement in reducing power consumption compared with the normal Y-branched polymer thermo-optic switch.     

Flow injection analysis simulations and diffusion coefficient determination by stochastic and deterministic optimization methods

Stochastic and deterministic simulations of dispersion in cylindrical channels on the Poiseuille flow have been presented. The random walk (stochastic) and the uniform dispersion (deterministic) models have been used for computations of flow injection analysis responses. These methods coupled with the genetic algorithm and the Levenberg–Marquardt optimization methods, respectively, have been applied for determination of diffusion coefficients. The diffusion coefficients of fluorescein sodium, potassium hexacyanoferrate and potassium dichromate have been determined by means of the presented methods and FIA responses that are available in literature. The best-fit results agree with each other and with experimental data thus validating both presented approaches.     

Ultra high performance liquid chromatography-quadrupole-time of flight analysis for the identification and the determination of resveratrol and its metabolites in mouse plasma

Resveratrol is a polyphenol that has numerous interesting biological properties, but, per os, it is quickly metabolized. Some of its metabolites are more concentrated than resveratrol, may have greater biological activities, and may act as a kind of store for resveratrol. Thus, to understand the biological impact of resveratrol on a physiological system, it is crucial to simultaneously analyze resveratrol and its metabolites in plasma. This study presents an analytical method based on UHPLC-Q-TOF mass spectrometry for the quantification of resveratrol and of its most common hydrophilic metabolites. The use of ¹³C- and D-labeled standards specific to each molecule led to a linear calibration curve on a larger concentration range than described previously. The use of high resolution mass spectrometry in the full scan mode enabled simultaneous identification and quantification of some hydrophilic metabolites not previously described in mice. In addition, UHPLC separation, allowing run times lower than 10 min, can be used in studies that requiring analysis of many samples.     

Transport Studies with Composite Membrane by Sol-Gel Method

The preparation of polystyrene-based composite membrane at different pressures with varying amounts of material has been described. In order to understand the mechanism of transport of ions, membrane potential measurements were carried out using different concentrations of 1:1 electrolyte (KCl, NaCl, and LiCl) solutions and also to evaluate various membrane parameters such as mobility, distribution coefficient, and charge effectiveness controlling the transport phenomena. The membrane potential offered by the electrolytes is in the order of LiCl > NaCl > KCl, and the membrane is found to be cation selective. The large deviation in the value of K _± at the lower concentration of electrolytes was attributed to the high mobility of comparatively free charges of the strong electrolyte. Teorell, Meyer, and Sievers (TMS) method was used for the estimation of the thermodynamically fixed charge density of membranes. The data were then utilized to calculate membrane potential using the TMS theory. It was interesting to note that the theoretical predictions were borne out quite satisfactorily with experimental results.     

A Correlation of the Drag Force Coefficient on a Sphere with Interface Slip at Low and Intermediate Reynolds Numbers

The hydrodynamics of a sphere with interface slip has been numerically investigated for flows of Reynolds number ranging 0 < Re ≤ 75. A simple correlation of the drag force coefficient in the present of interface slip has been derived based on our numerical simulations. The correlation takes the slip coefficient and Reynolds number as two input parameters. By comparing results found in the literature, we believe that the present correlation is more accurate; it provides a source for future experiment study and for numerical simulations of large multi-particle system where the interface slip is important.     

Micellar Enhanced Ultrafiltration of Reactive Black 5 from Aqueous Solution by Cationic Surfactants

Reactive black 5 (RB-5) dye was removed from a water stream using two cationic surfactants, cetyltrimethylammonium bromide (CTAB) and cetylpyridinium chloride (CPC), via micellar enhanced ultrafiltration. Three membranes with different pore size were used for the determination of rejection coefficient and permeate flux of the solution at 1.5 bar trans-membrane pressure (TMP). The two surfactants (CPC and CTAB) played an almost negligible role in rejection efficiency with 5000 and 10,000 molecular weight cut-off membrane (MWCO), respectively. In this case, high rejection and low permeate flux was the result of a larger molecular size of RB-5 DYE being retained by comparatively smaller sized pores of membrane via ultrafiltration. However, CPC and CTAB surfactants showed 83% and 98% rejection coefficient, respectively, at a concentration greater than their CMC values against 30,000 MWCO. Permeate flux remained low and constant in presence of 5000 and 10,000 MWCO with a small variation against 30,000 MWCO for the two surfactants, thereby no appreciable effect on both surfactant concentrations on concentration polarization was estimated. Thus, RB-5 dye alone was determined to be responsible for membrane plugging or concentration polarization and ultimately for low permeate flux. The effect of trans-membrane pressure was also investigated during this study.     

Oil-Water Partitioning of a Synthetic Tetracarboxylic Acid as a Function of pH

The oil-water partitioning of a synthetic tetraacid acting as a model compound for indigenous C₈₀-C₈₂ ARN acids has been studied as a function of pH, ionic strength and type of monovalent counterion. Experimental data obtained with ultraviolet-visible and HPLC/UV analyses have been fitted to thermodynamic models based on one, two or four dissociation steps to obtain o/w partition coefficients (K _wo ) of the fully protonated acid between chloroform and aqueous solutions, and its apparent acidity constant(s), pK _a. As the study is conducted above the CMC of the tetraacid, in general high apparent acidity constants were obtained in the range from 6 to 8 resulting from micellization equilibria. K _wo values were obtained in the range from 10^?3 to 10^?4, and decreasing with increasing salinity. At 50 mM K⁺, no conclusions could be made regarding the number of distinguishable dissociation steps, while at higher ionic strength (184 mM and 452 mM K⁺) and at 184 mM Na⁺ a model with two dissociation steps provided good fits to the experimental data. The first step was found to be given by a pK _a ≈ 6.6–6.8 and the second dissociation step at pK _a values ≈ 7.8–8.3. The two-step mechanism supports previous results obtained by potentiometric titrations. No significant difference in the o/w behavior was observed when changing the counterion from potassium to sodium. The main partitioning of the tetraacid in the aqueous phase occurred above pH 8, where the fully deprotonated acid was formed.     

Investigation on sound absorption properties of kapok fibers

Sound absorption properties of natural kapok fibers have been investigated. Kapok fibrous assemblies with different bulk density, thickness, fiber length and orientation were manufactured, and their acoustical performances were evaluated by using an impedance tube instrument. Results show that the kapok fiber has excellent acoustical damping performance due to its natural hollow structure, and the sound absorption coefficients of kapok fibrous assemblies are significantly affected by the bulk density, thickness and arrangement of kapok fibers but less dependent on the fiber length. Compared with assemblies of commercial glass wool and degreasing cotton fibers, the kapok fiber assemblies with the same thickness but much smaller bulk density may have the similar sound absorption coefficients. Theoretical modelling of the acoustical damping performance of kapok fibers shows a good agreement with the experimental data. All the results demonstrate that kapok fiber is a promising light and environment-friendly sound absorption material.     

Optical properties of a mesogen by image analysis

An image analysis technique in conjunction with polarising optical microscopy (POM) is proposed for assessment of the thermo-optical properties of homogeneously aligned chiral ester liquid crystals of the type ((S)-(-)-2-methylbutyl 4′-(4″-n-alkanoyloxybenzoyloxy) biphenyl-4-carboxylates, where n?=?16 or 18. Chiral ester textures are recorded as a function of temperature using POM provided with a hot-stage and a high-resolution colour camera. Temperature-dependent optical parameters, or thermo-optical properties such as optical transmission, degree of polarisation, absorption coefficient and birefringence are computed for chiral esters by analysing the texture of samples using MATLAB software. This is a simple experimental technique for observing how the optical parameters of liquid crystals change with temperature.