Investigation on the Interaction of Bendazac with β-, Hydroxypropyl-β-, and γ-, yclodextrins

The interactions of Bendazac, a topical non-steroidal anti-inflammatory drug, with-cyclodextrin, hydroxypropyl--cyclodextrin and -cyclodextrinwere investigated to evaluate possibilities to improve the drug's poor water solubilityand eventually to enhance the topical delivery of Bendazac. Phase solubility studiesdemonstrated the ability of the selected cyclodextrins to complex with Bendazac andincrease drug solubility. The amount of solubilized Bendazac increased linearly withthe addition of each cyclodextrin according toA_L type plots. ¹³C-NMR studiesshowed that the Bendazac A-ring was included in the cavity of the three cyclodextrins.The -cyclodextrin was also able to include the B-ring of Bendazac, forminga complex where one drug molecule fitted into two cyclodextrin molecules. Equimolarsolid systems of the drug with each cyclodextrin carrier were prepared using varioustechniques (physical mixing, spray-drying and freeze-drying). The results of differential scanning calorimetry and Fourier transform infrared analysis, performed on the solid systems, demonstrated that freeze-dried and spray-dried products had a high degree of amorphization and agreed with the hypothesis of the existence of drug–cyclodextrin interaction in the solid state. The cyclodextrins tested were able to improve the dissolution of Bendazac. The dissolution profile of the drug was also affected by the physico-chemical properties of each solid system, the freeze-dried products being the most rapidly dissolving forms.     

直接酯化法合成PET反应条件对树脂结晶速率的影响

用直接酯化法合成了聚对苯二甲酸乙二酯（ＰＥＴ）。对缩聚反应温度、真空度及稳定剂等合条件对产物结晶速率的影响进行了研究。以ΔＴｃ＝Ｔｃ－Ｔｇ和ΔＴｃｏ＝Ｔｃｏ－Ｔｇ表征样品的结晶速率。结果表明，真空度一定，反应温度高则样品结晶速率慢；温度一定，真空度高样品结晶速率也慢。这两个因素的影响均是不可忽视的。     

热致液晶聚酯酰亚胺的非等温相转变动力学研究

以差示扫描量热法对热致液晶聚酯酰亚胺的结晶过程和液晶化过程的非等温相转变动力学行为进行了初步研究，根据Ｊｅｚｉｏｒｎｙ方法处理数据得到了表征聚合物非等温相转变动力参数Ｚｃ，Ｇｃ并对其进行了讨论，结果表明，在所研究的条件下聚合物的相转变过程基本上符事Ｊｅｚｉｏｒｎｙ结论，但两种相转变的成核与生长方式是不同的。     

The structure and electrochemical characteristics of La0.67Mg0.33 (Ni0.8Co0.1Mn0.1) x (x=2.5–5.0) multiphase alloys for nickel-metal hydride batteries

This paper presents results concerning structure and electrochemical characteristics of the La_0.67Mg_0.33 (Ni_0.8Co_0.1Mn_0.1) _x (x=2.5–5.0) alloy. It can be found from the result of the Rietveld analyses that the structures of the alloys change obviously with increasing x from 2.5 to 5.0. The main phase of the alloys with x=2.5–3.5 is LaMg₂Ni₉ phase with a PuNi₃-type rhombohedral structure, but the main phase of the alloys with x=4.0–5.0 is LaNi₅phase with a CaCu₅-type hexagonal structure. Furthermore, the phase ratio, lattice parameter and cell volume of the LaMg₂Ni₉phase and the LaNi₅ phase change with increasing x. The electrochemical studies show that the maximum discharge capacity increases from 214.7 mAh/g (x=2.5) to 391.1 mAh/g (x=3.5) and then decreases to 238.5 mAh/g (x=5.0). As the discharge current density is 1,200 mA/g, the high rate dischargeability (HRD) increases from 51.1% (x=2.5) to 83.7% (x=3.5) and then decreases to 71.6% (x=5.0). Moreover, the exchange current density (I ₀) of the alloy electrodes first increases and then decrease with increasing x from 2.5 to 5.0, which is consistent with the variation of the HRD. The cell volume reduces with increasing x in the alloys, which is detrimental to hydrogen diffusion and accordingly decreases the low-temperature dischargeability of the alloy electrodes.     

Analysis of the nonisothermal crystallization kinetics in three linear aromatic polyester systems

Melt or cold crystallization kinetics has a strong bearing on morphology and the extent of crystallization, which significantly affects the physical properties of polymeric materials. Nonisothermal crystallization kinetics are often analyzed by the classical Johnson–Mehl–Avrami–Kolmogorov (JMAK) model or one of its variants, even though they are based on an isothermal assumption. As a result, during the nonisothermal (e.g. constant heating or cooling rate) crystallization of polymeric material, different sets of model parameters are required to describe crystallization at different rates, thereby increasing the total number of model parameters. In addition, due to the uncorrelated nature of these model parameters with the cooling or heating rate, accurate modeling at any intermediate condition is not possible. In the present work, these two limitations of the conventional approach have been eliminated by exhibiting the existence of a functional relationship between cooling or heating rate and effective activation energy during nonisothermal melt or cold crystallization in three linear aromatic polyesters. Furthermore, it has been shown that when the JMAK model is used in conjunction with this functional relationship, it is possible to precisely predict the experimental nonisothermal melt or cold crystallization kinetics at any linear cooling or heating rate with a single set of model parameters.     

Inclusion of α-phenyl-N-p-methylphenyl Nitrone in β- Cyclodextrin: Formation of 1G : 1H and 1G : 2H Complexes and the Remarkably Fast 1,3-Dipolar Cycloaddition of the 1G : 2H Complex with Olefins in the Solid State

The nitrone is found to be included in the -cyclodextrin cavity in two different stoichiometries viz., 1G : 1H and 1G : 2H – the existence of which is proved by physical methods. The 1G : 2H complex of the nitrone serves as a good potent dipolarophile in the 1,3-dipolar cycloaddition reactions with olefins resulting in rate acceleration and regioselection.     

Finding of remarkable synergistic effect on the aroxyl-radical-scavenging rates under the coexistence of α-tocopherol and catechins

Measurements of aroxyl radical (ArO^•)-scavenging rate constants () of antioxidants (AOHs) (α-tocopherol (α-TocH) and three catechins (CatHs) (ie, epicatechin (EC), epigallocatechin (EGC), and epigallocatechin gallate (EGCG)) were performed in ethanol solution, using stopped-flow spectrophotometry. values were measured not only for each AOH, but also for the mixtures of two AOHs (α-TocH and CatH). A notable synergistic effect that the value of α-TocH increases 1.29, 1.84, and 1.65 times under the coexistence of constant concentrations of EC, EGC, and EGCG, respectively, was observed for the solutions including α-TocH and CatH. Similarly, values of CatHs (EC, EGC, and EGCG) increased 1.72, 2.25, and 2.34 times under the coexistence of constant concentrations of α-TocH, respectively. UV-Vis absorption of α-tocopheroxyl radical (α-Toc^•) (λ_max = 428 nm), which had been produced by reaction of α-TocH with ArO^•, decreased remarkably under the coexistence of α-TocH and CatHs due to the fast α-TocH-regeneration reaction by CatHs. The result suggests that the prooxidant reaction due to α-Toc^• is suppressed by the coexistence of CatHs. By analyzing the formation and decay curves of α-Toc^•, it has been ascertained that one molecule of EGCG having three OH groups at B-ring may rapidly regenerate three molecules of α-Toc^• to α-TocH.     

微乳液体系中过硫酸钾氧化碘离子的动力学研究

分别在不同盐浓度的自由水和不同液滴尺寸的微乳液中测量了过硫酸钾氧化碘 离子的化学反应速率常数，获得微乳液不核中水的活度，探讨了水的活度及体系中 离子强度与反应速率的关系，发现当表面活性剂与水的摩尔比R≤20时，水的活度 随微反应器尺寸减小而快速下降。     

Spectrophotometric study of the complexation of iodine with 1,7-diaza-15-crown-5 in chloroform solution

The complex formation reaction between iodine and 1,7-diaza-15-crown-5 (DA15C5) has been studied spectrophotometrically in chloroform at 25°C. The resulting 1:2 (DA15C5:I₂) molecular complex was formulated as (DA15C5...;I⁺)I ₃ ^– . The spectrophotometric results, as well as the conductivity measurements, revealed that the gradual release of triiodide ion from its contact ion paired form in the molecular complex into the solution is the rate determining step of the reaction. The rate constant was calculated ask=(8.8±0.2)×10^–3 min^–1. The formation constant of the molecular complex was evaluated from the computer fitting of the absorbance-mole ratio data as logK _f=6.89±0.09.     

Thermogravimetry as a screening tool for the estimation of the vapor pressures of pure compounds

A simplified approach was developed to estimate the vapor pressure of pure compounds from experimental data obtained by isothermal thermogravimetric (TG) analysis. A numerical procedure was developed to estimate the Antoine parameters of the substance by the analysis of isothermal TG data. The results of the experimental validations carried out evidenced that at least a preliminary estimation of vapour pressures of pure substances by the analysis of TG data is possible. The limited time and the reduced amounts of sample required for the experimental runs make the technique attractive with respect to the conventional and more accurate techniques for vapor pressure assessment.