Contact angle hysteresis of liquid drops as means to measure adhesive energy of zein on solid substrates

Adhesion of zein to solid substrates has been studied using surface energy profiles as indices and by adhesion mapping using atomic force microscopy (AFM). Different plasticizers like glycerol and sorbitol have been used to form mixed films with zein and properties of these films are studied using surface energy profiles. Comparison of the results from the different mixed samples with those from the pure zein films showed that force mapping could identify areas rich in protein. The adhesion maps produced were deconvoluted from sample topography and contrasted with the data obtained from contact angle measurements. A comparison of the two methods shows that the extent of contact angle hysteresis is indicative of both hydrophobicity of the surface as well as the force of adhesion. Mechanical properties and microstructure of zein films prepared by casting from solutions and using Langmuir-Blodgett film technique have been investigated. Pure zein seemed brittle and exhibited an essentially linear relationship between stress and strain. Films with plasticizer were tougher than these films. In general, mixed films showed better mechanical properties than pure films and had higher ultimate tensile strength and increased per cent elongation. Further, the mixed films of zein showed a higher force of adhesion compared to the pure films.     

正态分布下任意秩有限总体中的Minimax预测

对于任意秩有限总体,在二次损失下,有关文献已给出了线性可预测变量在齐次线性预测类中的唯一线性Minimax预测．本文在正态假设下,证明了这个线性Minimax预测也是线性可预测变量在一切预测类中的唯一Minimax预测．     

相对论平均场理论对196Pb超形变态的研究

在形变约束的相对论平均场理论框架下, 用TMA, PK1, NL3和NL-SH相互作用对¹⁹⁶Pb的超形变态进行了系统研究. 给出了¹⁹⁶Pb的位能曲线、基态和超形变态的形变以及超形变态退激的激发能. ¹⁹⁶Pb的基态为β₂≈－0.15的扁椭球, 超形变激发态为β₂≈0.60的长椭球, 激发能在4－5MeV之间, 势阱深度在1－2.2MeV之间. 这些结果与最近观测的实验数据符合得非常好, 表明相对论平均场理论能够较好地描述¹⁹⁶Pb超形变转动带带首的能量.     

Property improvement of pulsed laser deposited boron carbide films by pulse shortening

Growth characteristics and surface morphology of boron carbide films fabricated by ablating a B₄C target in high vacuum with a traditional KrF excimer laser and a high brightness hybrid dye/excimer laser system emitting at the same wavelength while delivering 700 fs pulses are compared. The ultrashort pulse processing is highly effective. Energy densities between 0.25 and 2 J cm⁻² result in apparent growth rates ranging from 0.017 to 0.085 nm/pulse. Ablation with nanosecond pulses of one order of magnitude higher energy densities yields smaller growth rates, the figures increase from 0.002 to 0.016 nm/pulse within the 2-14.3 J cm⁻² fluence window. 2D thickness maps derived from variable angle spectroscopic ellipsometry reveal that, when ablating with sub-ps pulses, the spot size rather than the energy density determines both the deposition rate and the angular distribution of film material. Pulse shortening leads to significant improvement in surface morphology, as well. While droplets with number densities ranging from 1 × 10⁴ to 7 × 10⁴ mm⁻² deteriorate the surface of the films deposited by the KrF excimer laser, sub-ps pulses produce practically droplet-free films. The absence of droplets has also a beneficial effect on the stoichiometry and homogeneity of the films fabricated by ultrashort pulses.     

A simple model to extract hyperfine interaction distributions from Mössbauer spectra

The general problem of finding a distribution in hyperfine interaction parameters from experimental Mössbauer spectra is outlined. Existing methods may lack flexibility to be easily applicable to simple problems. A line shape for hyperfine parameter distributions is given, which is based on linear segments in the probability function. This method is applied in the analysis of samples containing iron in a silicate glass.     

喷气式Z箍缩等离子体辐射软X射线能谱的研究

研制了一台五通道ROSS-FILTER-PIN软X射线能谱仪，能谱范围为0.28—1.56keV.它由5个连续能段组成，每个能段的起止边由罗斯滤片对(ROSS-FILTERS)的L或K吸收边确定.罗斯滤片对的厚度通过优化计算得到，为了使每个通道的灵敏区外响应(即所测能段外响应)与通道总响应之比最小，在滤片对的第二滤片上镀上了一定厚度的第一滤片材料；为了缩减滤片表面积以增强低能滤片的抗冲击能力及方便滤片加工，能谱仪采用了小探测面积的PIN探测器(1mm²).借助此能谱仪，测量得到了喷气式Z箍缩(Z-pinch)等离子体辐射软X射线能谱的分布，并研究了软X射线产额随箍缩状况的变化趋势. 关键词： Z箍缩等离子体 罗斯滤片 软X射线能谱     

Semiconvergence in distribution of random closed sets with application to random optimization problems

The paper considers upper semicontinuous behavior in distribution of sequences of random closed sets. Semiconvergence in distribution will be described via convergence in distribution of random variables with values in a suitable topological space. Convergence statements for suitable functions of random sets are proved and the results are employed to derive stability statements for random optimization problems where the objective function and the constraint set are approximated simultaneously. The author is grateful to two anonymous referees for helpful suggestions.     

沪深股市相关结构分析研究

在金融市场风险分析中,对金融资产相关结构的讨论有着重要意义,从而引出对如何选取好的相关结构模型来捕捉金融资产间的相关变化规律的讨论。针对这一问题,我们用混合相关结构函数Copula对上海、深圳股票市场进行了相关分析研究,用极值分布刻画了每支股票的边缘分布,用两步估计法对Copula中的参数进行了估计。分析结果表明:混合Copula相关结构能够捕捉金融市场间相关性变化规律,比单个Copula相关结构更灵活,更能全面地反映市场间非对称变化的相关程度和模式,此方法还可以推广到对多种金融资产收益率进行相关性分析。     

Growth and characterization of model oxide catalysts

Oxide catalysts are frequently used to convert toxic species to environmentally benign molecules, and to prevent the formation of toxic species in the first place. In this paper, growth and characterization of model oxide systems employed in both approaches is discussed. An example of the former approach is the selective catalytic reduction (SCR) of NO emitted from power plants by NH₃, which employs tungsten and vanadium oxides supported on the anatase polymorph of TiO₂. To model SCR catalysts, epitaxial titanium, vanadium and tungsten oxide films were grown using molecular beam epitaxy and magnetron sputtering. Two different anatase orientations were grown on LaAlO₃ substrates and their interactions with vanadia were characterized. On LaAlO₃ (0 0 1), anatase exposed a (4 × 1) reconstructed (0 0 1) surface. Vanadia lifted the reconstruction and at 1 ML a (1 × 1) surface with mostly V⁵⁺ was observed. Continued V₂O₅ growth led to loss of order, but at high temperatures epitaxial VO₂ could be grown; vanadia behaved similarly on anatase films on LaAlO₃ (1 1 0). Results suggested that the monolayer is pseudomorphic with O adsorption oxidizing the surface V to 5+, since the anatase structure cannot accommodate more bulk oxygen, only a monolayer can be pseudomorphic and have only V⁵⁺. Thus the vanadia monolayer has unique structural and chemical properties that can help explain why vanadia monolayers on TiO₂ are much more active than bulk V₂O₅. For WO₃, a series of added row reconstructions were observed as the epitaxial films were reduced. The effect of these structures on surface chemistry was characterized by studying 1-propanol adsorption. The results indicated that the structure of the WO₃ surface did not alter its catalytic function but had a strong effect on reaction kinetics. As an example of a system where catalysts prevent the formation of toxic species, the reactivity of oxidized Pd surfaces used in CH₄ catalytic combustion were studied. An ordered PdO-like monolayer was found to be less reactive towards CO than adsorbed O on Pd. On the other hand, the PdO layer favored a lower activation energy C₃H₆ oxidation pathway. The results indicated that Pd oxidation reduces the sticking coefficient of reactive species but once molecules adsorb, the oxide surface can reduce the activation energy for subsequent reaction.