无烟煤结构的高分辨电镜研究

镜质组不仅是煤结构变化最具规律性，也是影响煤质的主要微成分。用点分辨率为２．１Ａ的高分辨电镜对几种不同煤化程度的无烟煤大分子结构进行了研究。结果表明：电镜图像直接表征了无烟煤分子的非均匀性孔隙结构。京西煤分子方向化程度强，主要以芳层平行堆或有序化前结构为主；晋城煤方向化程度弱，主要以粒状嵌晶结构为主。高分辨电镜技术是研究煤分子结构和煤化作用实质的有效方法。     

Synthesis of three-layered titanates BaLn<Subscript>2</Subscript>Ti<Subscript>3</Subscript>O<Subscript>10</Subscript> in systems with coprecipitated hydroxocarbonates

The synthesis of three-layered titanates BaLn₂Ti₃O₁₀ (Ln = La, Nd, Sm) in systems with coprecipitated hydroxocarbonates was studied. It was established that they are formed through an intermediate phase with a defective perovskite structure followed by its transformation into the three-layered structure by the ordering of vacancies and rare-earth element and barium atoms and subdivision into three-layered blocks. __________ Translated from Teoreticheskaya i éksperimental’naya Khimiya, Vol. 43, No. 6, pp. 349–353, November–December, 2007.     

Electrical Double Layer on Liquid Sn–Ga Alloy in Aqueous Solutions

Double-layer parameters of a liquid Sn–Ga electrode in aqueous electrolyte solutions are studied. It is shown that Sn in the alloy with Ga is a surface-active component and is forced out onto a surface layer of the electrode. The double-layer parameters of an Sn–Ga electrode (8 at. % Sn), which are measured in the experimentally accessible range of charges, differ radically from the parameters of Ga electrodes and are close to those of Sn electrode. Hence, an Sn–Ga electrode containing 8 at. % Sn simulates electrochemical properties of a liquid Sn electrode. The difference between reciprocal electronic capacitances of Hg and Sn and a corrected electrochemical work function of Sn are determined. It is shown that the chemisorption interaction of an Sn–Ga electrode with water molecules is virtually absent at charges more negative than –7 C/cm². A potential drop on uncharged Sn, which is associated with water chemisorption, is –20 mV. Thus, the hydrophilicity of Sn is slightly higher than that of Hg, Bi–Ga, Pb–Ga, and Tl–Ga and significantly lower than that of In–Ga, Cd–Ga, and Ga.     

Influence of nanoporous carbon electrode thickness on the electrochemical characteristics of a nanoporous carbon|tetraethylammonium tetrafluoroborate in acetonitrile solution interface

Electrochemical characteristics for the nanoporous carbon|Et₄NBF₄+acetonitrile interface have been studied by cyclic voltammetry and impedance spectroscopy methods. The influence of the electrolyte concentration and thickness of the nanoporous electrode material on the shape of the cyclic voltammetry and impedance curves has been established and the reasons for these phenomena are discussed. A value of zero charge potential, depending slightly on the structure and concentration of the electrolyte, the region of ideal polarizability and other characteristics have been established. The nanoporous nature of the carbon electrodes introduces a distribution of resistive and capacitive elements, giving rise to complicated electrochemical behaviour. Analysis of the complex plane plots shows that the nanoporous carbon|Et₄NBF₄+acetonitrile electrolyte interface can be simulated by an equivalent circuit, in which two parallel conduction paths in the solid and liquid phases are interconnected by the double-layer capacitance in parallel with the complex admittance of the hindered reaction of the charge transfer or of the partial charge transfer (i.e. adsorption stage limited) process. The values of the characteristic frequency depend on the electrolyte concentration and electrode potential, i.e. on the nature of the ions adsorbed at the surface of the nanoporous carbon electrode. The value of the solid state phase resistance established is independent of the thickness of the electrode material.     

X射线荧光光谱铝环-双层压片法测定土壤中常量和微量元素

本文提出用铝环-双层压片法制片,经验系数法校正吸收-增强效应,对少量土壤样品中的常量和微量元素进行了定量测定。取样量为500 mg,制样与测量精确度好于5%,用本法对标样的分析表明,分析值与推荐值基本一致,本法具有简单、快速、成本低的特点,适用于少量样品的分析。     

A dual-electrode approach for highly selective detection of glucose based on diffusion layer theory: experiments and simulation

A dual-electrode configuration for the highly selective detection of glucose in the diffusion layer of the substrate electrode is presented. In this approach, a glassy carbon electrode (GCE, substrate) modified with a conductive layer of glucose oxidase/Nafion/graphite (GNG) was used to create an interference-free region in its diffusion layer by electrochemical depletion of interfering electroactive species. A Pt microelectrode (tip, 5 microm in radius) was located in the diffusion layer of the GNG-modified GCE (GNG-G) with the help of scanning electrochemical microscopy. Consequently, the tip of the electrode could sense glucose selectively by detecting the amount of hydrogen peroxide (H2O2) formed from the oxidization of glucose on the glucose oxidase layer. The influences of parameters, including tip-substrate distance, substrate potential, and electrolyzing time, on the interference-removing efficiency of this dual-electrode approach have been investigated systematically. When the electrolyzing time was 30 s, the tip-substrate distance was 1.8 a (9.0 microm) (where a is the radius of the tip electrode), the potentials of the tip and substrate electrodes were 0.7 V and 0.4 V, respectively, and a mixture of ascorbic acid (0.3 mM), uric acid (0.3 mM), and 4-acetaminophen (0.3 mM) had no influence on the glucose detection. In addition, the current-time responses of the tip electrode at different tip-substrate distances in a solution containing interfering species were numerically simulated. The results from the simulation are in good agreement with the experimental data. This research provides a concept of detection in the diffusion layer of a substrate electrode, as an interference-free region, for developing novel microelectrochemical devices.     

Development of B‐doped Si multiple delta‐layer reference materials for SIMS profiling

B‐doped Si multiple delta‐layers (MDL) were developed as certified reference materials (CRM) for secondary ion mass spectrometry (SIMS) depth profiling analysis. Two CRMs with different delta‐layer spacing were grown by ion beam sputter deposition (IBSD). The nominal spacing of the MDL for shallow junction analysis is 10 nm and that for high energy SIMS is 50 nm. The total thickness of the film was certified by high resolution transmission electron microscopy (HR‐TEM). The B‐doped Si MDLs can be used to evaluate SIMS depth resolution and to calibrate the depth scale. A consistency check of the calibration of stylus profilometers for measurement of sputter depth is another possible application. The crater depths measured by a stylus profilometer showed a good linear relationship with the thickness measured from SIMS profiling using the calibrated film thickness for depth scale calibration. The sputtering rate of the amorphous Si thin film grown by sputter deposition was found to be the same as that of the crystalline Si substrate, which means that the sputtering rate measured with these CRMs can be applied to a real analysis of crystalline Si. Copyright © 2005 John Wiley & Sons, Ltd.     

An effective cross-linking of polymer layer on monodisperse, poly(maleic anhydride-styrene)-modified colloidal silica particles and properties of the composite

Summary  The cross-linkings of the surface polymer layer on mono disperse, poly(maleic anhydride-styrene)-modified silica particles by the reaction with diisocyanate were studied. The extent of cross-linking was estimated by the weight decrease by immersing the particles in the buffer solution of pH 2.0, 4.0 and 9.0 at a room temperature for 24 h. The reaction of the polymer-modified silica with 1,6-diisocyanatohexane afforded relatively stable composite particles which lost less than 5 wt% of the polymer in aqueous solution in the pH range 2.0–9.0. The diisocyanate was a preferable cross-linker to 2,4-diisocyanatotoluene in terms of stability in acidic or basic aqueous solution. The flexibility of the cross-linker molecule possibly plays an important role in the cross-linking reaction. The carboxyl and amino groups were formed by treating the cross-linked composite particles with diluted HCl solution; 5–6 and 0.5–1.1 μmol g^-1, respectively. The cross-linked composite particles exhibited the characteristic property of ζ-potential, −44 to −47 mV and −102 to −107 mV in a neutral aqueous solution and ethanol, respectively. Received: 26 May 1997 Accepted: 4 August 1997     

Novel anti-inflammatory and wound healing controlled released LDH-Curcumin nanocomposite via intramuscular implantation,in-vivo study

One of the most common problems in wounds is delayed healing and complications such as infection. Therefore, the need for novel materials accelerates the healing of wounds especially abdominal wounds after surgery besides high efficiency and safety is mandatory. The rate of wound healing, anti-inflammatory and biocompatibility of Zn-Al LDH (Zn-Al layer double hydroxide) alone and loaded with Curcumin (Zn-Al LDH/Curcumin) was screened via in-vivo assays through intramuscular implantation in rat abdominal wall with intact peritoneum cavity. The implanted drugs were formed through Curcumin loaded into LDH of Zn-Al with drug release of 56.78 ± 1.51% within 24 h. The synthesized nanocomposite was characterized by (TGA/DTA) thermal analysis, (XRD) X-ray diffraction, (FESEM) Field emission scanning electron microscopy, (HRTEM) high resolution transmission electron microscope, energy dispersive X-ray (EDX) and low-temperature N₂ adsorption, pore volume and average pore size distribution. The integrity of blood circulation, inflammatory signs, wound healing rate, capacity of tissue integration, antigenicity and composite biocompatibility, auto fluorescence ability of collagen bundles and the tensile strength of the muscle were assessed histopathologically after 7 and 30 days’ post-implantation. Excellent wound healing ability was achieved with shortest length between the wound gap edges and higher tensile strength of the muscle. Besides emit florescence very well followed by good healing and tensile muscles strength in Curcumin while very low strength with scar formation in Zn-Al LDH/Curcumin in both acute and chronic wound. No signs of inflammation in Curcumin & Zn-Al LDH. No vessels obstruction or bleeding observed in both Zn-Al LDH and Curcumin more than Zn-Al LDH/Curcumin and control which examined through candling. Good healing & infiltrated immune cells in same groups through histopathological examination. This work supports the anti-inflammatory, wound healing and biocompatibility of both LDH and Curcumin with living matter, increasing their biomedical applications in this era with safety and increasing efficacy with prolonged drug release.     

Impregnated silica-based layers in thin layer chromatography

Abstract

Impregnated thin-layer chromatography (TLC) layers based on silica gel are presented. Impregnating agents such as metal cations, inorganic ions, chelating agents, chiral selectors, surfactants, ion-pairing reagents, and ionic liquids are discussed. The role of impregnated TLC layers in medicinal chemistry is highlighted. The historical overview of TLC separations on physically coated layers is given and some future prospects ahead of this technique are discussed.