三元铱配合物磷光体系的白光有机电致发光器件光谱特性研究

将黄光磷光材料bis[2-(4-tertbutylphenyl)benzothiazolato-N,C2’]iridium (acetylacetonate) [(t-bt)₂Ir(acac)]超薄层作为黄光发光层,两个蓝光磷光染料iridium(Ⅲ) bis(4’,6’-difluorophenylpyridinato)tetrakis(1-pyrazolyl)borate (FIr6)和bis[(4,6-difluorophenyl)-pyridinato-N,C2’](picolinate) iridium (Ⅲ) (FIrpic)掺杂层作为蓝光发光层,制备了三元发光层的白光有机电致发光器件。该器件具有三元磷光染料分子协同发光特性,并且利用合适厚度的隔层,将三线态激子束缚在各自激子复合区域内,获得了稳定电致发光光谱,CIE色坐标为(0.29±0.01, 0.34±0.01),处于理想的白光区域。通过器件电学特性的测试,验证了磷光染料在三元发光层器件中电致发光作用的机理,同时结果表明,三元发光层器件由于稳定的激子复合区域而有效减弱了器件效率滚降现象。     

原位成形光学微透镜的聚光性能研究

为解决荧光谱微检测系统中光学微透镜制作的困难,提出一种原位成形微透镜的制作方法,研究该微透镜的聚光性能,利用传统几何光学原理,分别推导出激发微透镜与检测微透镜的光线追迹方程,用该方程计算了2种微透镜的照射点分布几率,画出相应的分布曲线图,讨论了不同形状参数的微透镜对聚光性能的影响。研究结果表明,通过在光学胶中适当掺杂及打磨基底玻璃,可减小接触角,加大微透镜的形状参数,既能坚固透镜与基底间的粘接强度,又能提高微透镜的聚光本领。制作了使用原位成形光学微透镜的荧光谱微检测器,对生物荧光试剂进行了测试。实验结果表明,使用原位成形光学微透镜进行聚光,可使生物荧光谱强度提高4倍以上,通过在光学胶中掺杂以及打磨玻璃的办法,可以提高透镜的聚光本领约1.2倍。     

In‐Situ Measurement of Local Particle Flux Densities in a Complex Two‐Phase Flow

An optical measuring technique is presented allowing the exact in‐situ measurement of local particle flux densities in a confined channel flow by counting single particles penetrating an optically well defined measuring volume. This enables a precise flux determination up to the direct vicinity of planar walls. The measurement set‐up and its calibration as well as the whole test facility are described in detail. This measurement technique is used to study the particle transport in electrostatic precipitators. Exemplarily, results of particle flux profiles as well as precipitation, as gained from balances of parts of the precipitator channel, are presented. Furthermore, the possibility to determine particle velocity fluctuations is demonstrated.     

一维光学格子孤子的传输特性及控制研究

利用解析和数值方法研究了在具有横向折射率周期性调制的克尔型非线性介质中光学格子孤子的传输，得到了孤子参数的演化方程以及格子孤子的形成和稳定传输的条件.结果表明：当光束的入射角小于某临界角度时，光束可被类似波导形式的路径俘获而稳定传输，该临界角随折射率调制周期、调制深度的增加而增大，且光束越窄临界值越大.此外，线性空间啁啾虽然对光束传输的中心位置没有任何影响，但会导致光束发散从而破坏格子孤子的形成和稳定传输，对此提出了采用特定功率取值来补偿啁啾作用从而形成格子孤子的方案. 关键词： 光孤子 光学格子 光传输 矩方法     

Method of Self-Mixing in the Spectroscopy of Quasielastically Scattered Laser Radiation

Interaction of a semiconductor laser with its self-radiation quasielastically scattered in the environment is considered. It is established that at small coefficients of coupling of the laser with the scattering medium the spectral density of the power of an optoelectronic signal in the laser faithfully reproduces the shape of the scattered-radiation spectrum at the Doppler-shift frequencies. This makes it possible to measure the spectrum with a resolution characteristic for optical homodynation by recording the optoelectronic signal.     

Splitting of an edge dislocation by an optical vortex

In a linear medium an optical vortex induces the splitting of an edge dislocation into vortices of both topological charges. Their positions and number depend on which of the phase dislocations is shifted from the center of the host beam. Violations of the charge conservation law are discussed.     

自集成透镜InGaAsP／InPDHLED及其离子束铣技术

本文报道在国内首次采用离子束铣技术研制自集成透镜InGaAsP/InP DH LED的实验结果。采用烘烤正性光致抗蚀剂来形成球状掩膜适合于离子束铣,且重复性很好。为了获得光洁的刻蚀表面,刻蚀条件均已最优化。     

微通道板真空体电阻与Ⅱ代倒象微光管匹配关系的研究

国内研制的20/30Ⅱ代倒象微光管经常出现微通道板真空体电阻偏高或偏低的问题,直接影响Ⅱ代倒象微光管荧光屏的亮度和目标分辨力,严重影响微光管的质量。经过对20/30Ⅱ代倒象微光管的研制和理论分析,证明英国马拉德公司对用于××1383Ⅱ代倒象微光管的H36微通道板技术条件中真空体电阻技术指标的规定也存在一定的问题。本文从目前国内外工艺水平和有关文献资料的分析出发,进行专题研究。本文中所推导的计算公式和对文献资料提供的技术数据的推导分析,同样适用于其他型号微通道板的真空体电阻与相应Ⅱ代、Ⅲ代微光管匹配关系的计算与研究。