Study of Ganga River – Groundwater Interaction Using Environmental Oxygen-18

The influent and effluent characteristics of river Ganga in the Hardwar-Narora sector in Uttar Pradesh, India was studied using environmental oxygen-18. δ¹⁸O of river water and also of groundwater close to the river course was monitored at 8 stations along the 220 km stretch for a period of ten months. δ¹⁸O of the river during the monsoon months (June to September) was about – 10 at all the stations. However, during the dry months from October to April, the δ¹⁸O of the river was enriched progressively from Hardwar to Narora. The enrichment indicated groundwater contribution to the river during the non-monsoon months. The contribution was comuted using the principle of isotope balance.     

Curing behavior and properties of high biosourced epoxy resin blends based on a triepoxy monomer and a tricarboxylic acid hardener from 10-undecenoic acid

Renewable propane-1,2,3-triyl tris(9-(oxiran-2-yl) nonanoate) (EGU, 100 wt% biogenic) and a tricarboxylic acid triglyceride (CGTU) hardener (85.7 wt% biogenic) were synthesized from 10-undecenoic acid (10-UDA) and used to produce epoxy resins with 52–92 wt% biobased carbon. CGTU was prepared by thermally activated thiol-ene coupling of thioglycolic acid onto propane-1,2,3-triyl tris(undec-10-enoate), (GUD) in the absence of solvent. The characterized CGTU was used as a green hardener of blends based on EGU and a conventional bisphenol A-based epoxy pre-polymer (DGEBA) at various mass percentages (0–100 wt%) with an stoichiometric epoxy/acid equivalent ratio. Calorimetric studies revealed higher peak temperature, lower reaction heats, and longer gelation times in resins with high EGU proportion, evidencing the lower reactivity of aliphatic EGU compared with aromatic DGEBA. Cured resins were yellowish transparent rubber-like materials with glass transition temperatures (Tg) varying from −14 °C to −42 °C and tensile strength in the range of 1750 kPa–790 kPa, for 0 and 100 wt % EGU, respectively. The soluble fraction of all resins was less than 4.3%, reflecting a high level of crosslinking. Thermosets with high biobased content showed both UV-light protection and visible light transparency.     

Catalytic Aerobic Oxidation of Biomass‐based Furfural into Maleic Acid in Aqueous Phase with Metalloporphyrin Catalysts

Catalytic oxidation of renewable furfural into valuable maleic acid in aqueous solutions using metalloporphyrin catalysts was investigated for the first time. The synthesized catalysts were characterized by FT‐IR , UV –vis, ¹H NMR , elemental analysis, and TGA . The catalysts varied in metal active sites and functional groups, which had different effects on their catalytic activity. Furthermore, the effects of temperatures, reaction time, catalyst loading, and oxygen pressure were studied in detail. Maleic acid could be achieved in 44% yield by using FeT (p‐Cl)PPCl as catalyst under optimal conditions. Finally, FeT (p‐Cl)PPCl could be reused in five consecutive runs without a significant loss of activity.     

Theory of variational calculation with a scaling correct moment functional to solve the electronic schrödinger equation directly for ground state one‐electron density and electronic energy

The reduction of the electronic Schrodinger equation or its calculating algorithm from 4N‐dimensions to a nonlinear, approximate density functional of a three spatial dimension one‐electron density for an N electron system which is tractable in practice, is a long‐desired goal in electronic structure calculation. In a seminal work, Parr et al. (Phys. Rev. A 1997, 55, 1792) suggested a well behaving density functional in power series with respect to density scaling within the orbital‐free framework for kinetic and repulsion energy of electrons. The updated literature on this subject is listed, reviewed, and summarized. Using this series with some modifications, a good density functional approximation is analyzed and solved via the Lagrange multiplier device. (We call the attention that the introduction of a Lagrangian multiplier to ensure normalization is a new element in this part of the related, general theory.) Its relation to Hartree–Fock (HF) and Kohn–Sham (KS) formalism is also analyzed for the goal to replace all the analytical Gaussian based two and four center integrals (∫g_i( r ₁)g_k( r ₂)rd r ₁d r ₂, etc.) to estimate electron‐electron interactions with cheaper numerical integration. The KS method needs the numerical integration anyway for correlation estimation. © 2012 Wiley Periodicals, Inc.     

碳纳米管担载纳米Ir催化生物质基乙酰丙酸合成γ-戊内酯

以碳纳米管(CNTs)担载Ir纳米粒子为催化剂进行生物质基平台化合物乙酰丙酸(LA)选择加氢制备γ-戊内酯(GVL)的研究,并利用X射线衍射、X射线光电子能谱和透射电镜表征了使用前后的Ir/CNT催化剂,探讨了影响LA催化加氢制GVL反应性能的因素和该反应的可能路径.结果表明,与Ru,Rh和Pd等传统铂族金属相比,Ir/CNT催化剂不但可在温和条件下(50℃,2.0 MPa,H₂)实现LA至GVL的完全转化,且可对多类直接源于生物质水解的含等量LA/甲酸的“真实”体系实现GVL的高效选择合成.     

Determination of Anionic Surfactants in Water

The use of ternary complexes in the determination of anionic surfactants has been investigated and an analytical method using linear alkyl sulfonates as a test substance has been developed. The method involves the formation of the chloroform-extractable bisphenanthroline Cu(II)-linear alkyl sulfonate (LAS) complex and the subsequent equilibration of the extract with erythrosine to form the extractable bisphenanthroline Cu(II)-erythrosine complex. In the equilibration step erythrosine displaces LAS quantitatively, allowing the determination of the LAS originally present by measuring the absorbance of the extracted bisphenanthroline-Cu(II)-erythrosine complex. Results are reported of studies made to determine the optimum analytical conditions, the sensitivity, and the precision for the method described.     

Chromatography of Uranium on High-Performance Ion Exchangers

Abstract

The potential of high-performance liquid chromatography (HPLC) for the determination of U(VI) in ground waters and urine has been examined under a variety of HPLC experimental conditions. Conventional cross-linked and bonded-phase ion exchangers, both cation and anion, were studied with aqueous mobile phases containing tartrate, citrate, or α-hydroxyisobutyrate. The best chromatography was obtained on bonded-phase cation exchangers with an α-hydroxyisobutyrate eluent. The metal ions were detected either by visible spectrophotometry after a post-column reaction with a complexing reagent, or with a polarographic detector. Dectection after post-column reaction gave the best sensitivity; the detection limit (2 × baseline noise was 6 ng or 60 ng.ml^?1 for 100 μl samples. In-line trace enrichment was used to decrease detection limits and linear calibration curves were observed in the ranges studied; 0.5 to 50 ng.mL^?1 for ground waters and 25 to 400 ng.mL^?1 for artificial urine.     

固态研磨-燃烧法制CuO-ZnO-ZrO2/HZSM-5二甲醚合成催化剂

以柠檬酸为燃烧剂,采用固态研磨-燃烧法和机械混合法制备了CuO-ZnO-ZrO2/HZSM-5CO2加氢一步合成二甲醚双功能催化剂.采用固定床反应器,在反应温度270℃、压力为3.0 MPa、空速4 200 h-1条件下,考察了催化剂对CO2加氢一步合成二甲醚的反应性能,并采用XRD、BET、H2-TPR、NH3-TPD及XPS对催化剂的结构进行了表征.评价结果表明:随柠檬酸量的增加,二甲醚选择性和收率呈峰形变化趋势;当柠檬酸的量等于化学计量比的100%时,制备的催化剂具有较好的催化性能:CO2单程转化率为24.8%、二甲醚(DME)的选择性和收率分别为35.3%和8.7%.表征结果表明:柠檬酸的量影响催化剂的比表面积、还原性能以及CuO和ZnO的晶粒尺寸等,进而影响催化剂反应性能.     

Ground state solution for differential equations with left and right fractional derivatives

In this work, we study the existence of positive solutions for a class of fractional differential equation given by (1) where . Using the mountain pass theorem and comparison argument, we prove that (1) at least has one nontrivial solution. Copyright © 2015 John Wiley & Sons, Ltd.     

Evaluation of Acacia nilotica as a non conventional low cost biosorbent for the elimination of Pb(II) and Cd(II) ions from aqueous solutions

In the present study a biomass derived from the leaves of Acacia nilotica was used as an adsorbent material for the removal of cadmium and lead from aqueous solution. The effect of various operating variables, viz., adsorbent dosage, contact time, pH and temperature on the removal of cadmium and lead has been studied. Maximum adsorption of cadmium and lead arises at a concentration of 2 g/50 ml and 3 g/50 ml and at a pH value of 5 and 4, respectively. The sorption data favored the pseudo-second-order kinetic model. Langmuir, Freundlich and Dubinin–Radushkevich (D–R) models were applied to describe the biosorption isotherm of the metal ions by A. nilotica biomass. Based on regression coefficient, the equilibrium data found were fitted well to the Langmuir equilibrium model than other models. Thermodynamic parameters such as free energy change (ΔG°), enthalpy change (ΔH°) and entropy change (ΔS°) have been calculated, respectively revealed the spontaneous, endothermic and feasible nature of adsorption process. The activation energy of the biosorption (Ea) was estimated as 9.34 kJ mol⁻¹ for Pb and 3.47 kJ mol⁻¹ for Cd from Arrhenius plot at different temperatures.