微波消解-ICP-AES法测定塑料中Pb和Cd

采用微波消解法进行溶样,以ICP-AES法测定塑料中Pb和Cd的含量。Pb、Cd的回收率分别为96.0%~102.0、93.3%~105.0%。Pb、Cd测定结果的相对标准偏差分别为0.567%、1.19%(n=10)。Pb和Cd的检出限分别为0.02、0.005 mg/L。该方法适用于多种塑料中Pb和Cd含量的快速分析。     

Combined EPMA and AES depth profiling of a multilayer Ti-Al-O-N coating

In order to compare thin-film electron probe microanalysis (EPMA) and Auger electron spectroscopy (AES) regarding reliability in quantifying chemical compositions of Ti-Al-O-N coatings with depth, a multilayer was prepared on a silicon wafer by using reactive ionized cluster beam deposition technique. Within a total thickness of about 25 nm the composition of the multilayer varied step by step from Ti-Al-O-N at the bottom to Al-O at the top. AES and, as an innovation, EPMA crater edge profiling was applied to measure the composition with depth. For quantification special thin-film EPMA techniques based on Monte Carlo simulations were applied. The chemical binding states of Al and Ti with depth were analysed using a high resolution energy analyser (MAC 3) for the AES investigations working in the direct mode. According to the deposition procedure the concentration profiles of the components varied with depth for both AES and EPMA measurements. AES provided a better depth resolution than EPMA. To get a true calibration of the depth scale an in-situ measurement method like an optical interferometry will be required. Assuming that the relative sensitivity factors are available AES depth profiling delivers concentration profiles with good accuracy. The new EPMA application provided quantitative depth profiles concerning concentration and coverage. For EPMA crater edge profiling the coating needs to be deposited on a foreign substrate because depth distributions of elements being present in both the layer and the substrate cannot be resolved.The combination of AES-depth profiling with EPMA crater edge profiling techniques is a powerful tool to analyse heterostructures quantitatively.     

Topical Problems in Elemental Analysis of Advanced Ceramic Materials

Selected prominent problems in the analysis of advanced ceramic materials are surveyed. The importance of reliability of results is discussed in the field of elemental trace- and microanalysis in view of its interaction with economy, power of detection, local resolution and speciation selectivity. Particular problems in the analysis of major constituents, trace components and microlocal distributions are based on the striking propertics of ceramics; they are exemplified. Analytical assistance must start from the beginning of the production processing, in the preparation of the powdered base materials. Determination of the stoichiometry requires high accuracy and differentiation of chemical species in bulk and surface analysis of ceramic base powders. Element trace determination by direct instrumental methods requires standard reference materials for calibration; these are currently inavailable in a sufficient variety. For optimum reliability and power of detection, element traces must be prepared in isolated form in a small excitation volume for analysis. A review on the state-of-the-art of wet-chemical combined procedures is presented. Decomposition position procedures are emphasized, due to their risk of contributing severe systematic error. Combustion in elementary fluorine is presented for decomposition of refractory materials. The performance of some direct procedures is discussed. Very efficient methods are available for element trace determinations in ceramic materials, offering high detection power. Several approaches for high-resolution local microanalysis in non-conductive ceramic materials are identified as the most promising development in the analysis of sintered compact ceramic products and devices.     

Surface of Ru/Fe2O3 catalysts used in water-gas shift reaction studied by auger electron spectrometry

Summary Carbon deposits on the surface ofRu/Fe₂O₃ catalysts used in the water-gas shift reaction have been investigated by Auger Electron Spectrometry. A correlation has been found between the thickness of the carbon deposit and the catalytic activity in WGSR. The carbon deposit covers the metallic active centers and blocks their contact with reagents. The dotting of the iron oxide support with sodium has been found to reduce the amount of carbon deposit. .      

Auger electron spectroscopic study of CO2 adsorption on Zircaloy-4 surfaces

We investigate the adsorption of CO₂ onto Zircaloy-4 (Zry-4) surfaces at 150, 300 and 600 K using Auger electron spectroscopy (AES). Following CO₂ adsorption at 150 K the graphitic form of carbon is detected, whereas upon chemisorption at 300 and 600 K we detect the carbidic phase. As the adsorption temperature is increased, the carbon Auger signal increases, whereas the oxygen signal decreases. Adsorption at all three temperatures results in a shift of the Zr Auger features, indicating surface oxidation. The effect of adsorbed CO₂ on the Zr(MVV) and Zr(MNV) transitions depends on adsorption temperature and is less pronounced at higher temperatures. On the other hand, changes in the Zr(MNN) feature are similar for all three adsorption temperatures. The changes in the Zr Auger peak shapes and positions are attributed to oxygen from dissociated CO₂, with the differences observed at various temperatures indicative of the diffusion of oxygen into the subsurface region.     

CID-ICP-AES用于高纯试样的分析性能

研究了CID-IP-AES用于测定高纯物质的分析性能。以高纯LiOH为对象，研究了低浓度范围内分析线的选择，标准曲线的特性，探讨了直接用于高纯物质分析的检测能力及可行性。     

About the Importance of Nanometer-Thick Intergranular Penetration in the Analysis of Liquid Metal Embrittlement

Liquid metal embrittlement (LME) of copper by liquid bismuth is investigated at 300°C. It is shown that a very rapid damage is due to the synergy between the external stress and the phenomenon of intergranular penetration (IGP). Tests of IGP, i.e. without external stress, were done at 300°C and at 600°C and have resulted in strong intergranular embrittlement due to the formation of nanometer-thick intergranular films, as measured and quantified by Auger electron spectroscopy (AES). The formation of these films is discussed with respect to apparently non-zero dihedral angles at 600°C. A general procedure based on mechanical testing and AES measurements, to check whether IGP has occurred or not, is outlined. This procedure can be seen as an alternative way to determine the wetting transition temperature. The presence of nanometer-thick films due to IGP is discussed with respect to the LME mechanisms.     

电感耦合等离子体原子发射光谱法测定电解金属锰中硒、铁、硅

本文采用稀硫酸溶解试样，ICP－AES法同时测定电解金属锰中硒、铁、硅，通过对溶样酸、锰基体以及背景的研究，确定了分析条件。该方法简便具有良好的精密度和准确性，相对标准偏差不大于2．68％，回收率为98％－105％。经t检验与经典法无显著性差异。     

Adsorption of water on JSC‐1A (simulated moon dust samples)—a surface science study

JSC‐1a (a simulated lunar dust sample) supported on a silica wafer (SiO₂/Si(111)) has been characterized by scanning electron microscopy (SEM), energy dispersive x‐ray (EDX) spectroscopy, and Auger electron spectroscopy (AES). The adsorption kinetics of water has been studied primarily by thermal desorption spectroscopy (TDS) and in addition by collecting isothermal adsorption transients. Blind experiments on the silica support have been performed as well. JSC‐1a consists mostly of aluminosilicate glass and other minerals containing Fe, Na, Ca, and Mg, as characterized in detail in prior studies, for example, at NASA. The particle sizes span the range from a few micrometers up to 100 µm. At small exposures, H₂O TDS is characterized by broad (100–450) K structures; at large exposures, distinct TDS peaks emerge, which are assigned to amorphous solid water (ASW) (145 K) and crystalline ice (CI) (165 K). Water dissociates on JSC‐1a at small exposures but not on the bare silica support. Coadsorption TDS data (alkane–water mixtures) indicate that rather porous condensed ice layers form at large exposures, with the mineral particles acting most likely as nucleation sites. At thermal impact energies, the initial adsorption probability amounts to 0.92 ± 0.05. It is evident that the drop‐and‐dry technique, developed in studies about nanoparticles/tubes, can be extended to obtain samples for surface science studies based on powders consisting of particles with rather large diameters. Copyright © 2008 John Wiley & Sons, Ltd.     

电感耦合等离子体原子发射光谱法测定化妆品中砷、铅、汞

本文采用五氧化二钒作催化剂，HNO3－H2SO4消解法对化妆品前处理后，用电感耦合等离子体发射光谱仪同时测定砷，铅，汞，方法简便，快速，回收率在95％－103．5％之间，相对标准偏差不大于3％。