全光纤模式转换器的设计及优化

提出了一种新型全光纤LP02模宽带模式转换器.基于模式匹配原理采用双芯光纤设计,利用LP11模作为中间过渡模式,实现了宽带模式转换.运用光束传播法和模式耦合理论分析了光纤参量对有效折射率的影响,选择合适的光纤参量实现了模式匹配,分析了纤芯距离等参量对模式转换效率和带宽的影响,对比相同光纤参量下,直接和间接模式转换方法,数值模拟表明,采用间接法能够有效提高模式转换带宽,当要求转换效率大于80%时,这种模式转换器带宽能够达到121nm.     

基于PN结传感器的数字式温度计实验研究

利用数字电压表单元模块、恒流源、AD620等设计测温实验电路,设计制作出0~100℃的数字温度计,它具有线性度高、热响应速度快、测温精度较高、重量轻、易制作、成本低等优点,可以测量固体、液体和气体的温度,具有广泛的用途。     

Frequency/time domain modeling of a direct drive point absorber wave energy converter

Two different methods to model a point absorber wave energy converter(WEC)with direct drive linear power take-off(PTO)are proposed in the present study:the frequency domain(FD)method and the time domain(TD)method.In the FD analysis,the frequency response function(FRF)of the WEC device is obtained via the equation of motion,and the expressions of power capture width in regular and random waves are derived as well.In the TD modeling,based on a state space approximation of the convolution term in the motion equation,both regular wave and random wave simulations are carried out.The regular wave simulation results indicate that the state space approximation is sufficiently accurate and the capture width reaches the maximum in the vicinity of the natural frequency.In the random wave simulations,the effects of buoy size,the PTO damping and wave climate on the power capture width are discussed in detail,which leads to the conclusion that the capture widths are influenced by the natural frequency of the WEC device,peak frequency of the wave spectrum,the amplitude of FRF and PTO damping.Furthermore,the increase of the capture width is at the cost of a relatively large buoy size and PTO damping when control is not included.     

Design and simulation of a C-band SLED with mode converter

The transient response analysis of the SLED based on the equivalent circuit is described. Then, a C-band SLED using TE0,1,15 mode cylindrical cavity with TE10-TE01 mode converter has been designed. According to the main RF parameters of the accelerator, the coupling coefficient is optimized to obtain the maximum multiplication factor. The key components of the pulse compressor include a 3 dB directional coupler, a TE10-TE01 mode converter,and a cylindrical cavity, which are simulated and optimized using 3D electromagnetic field simulation software. In addition, the function defining the relation between the coupling factor and aperture size is derived by a mathematical fitting method.     

静电式同位素辐射能量收集器的研究

针对目前无线传感网络节点对长寿命微能源的需求,提出了将同位素辐射能量转换为电能的静电式振动能量收集原理.该原理利用同位素63Niβ辐射能实现平行板悬浮-质量块结构的自由阻尼振动,并通过可变电容电路实现充-放电振荡循环,从而实现电能的转换.通过分析运动状态和能量转化过程,给出了结构的运动状态和能量输出方程,并使用Matlab/Simulink对输出特性进行了数值模拟和基于Ansys的结构优化设计.根据仿真和优化的结构尺寸设计出了满足最大平均输出功率的微电子机械器件结构.结果表明:所设计的结构在一阶固有频率为500 Hz,两极板间距离为75μm,外接电阻为90 k?时平均输出功率最大为0.416μW,转化效率8.25%.     

谷值V~2控制Boost变换器的精确建模与动力学分析

建立了谷值V2控制Boost变换器的离散迭代映射模型,在此基础上得到了输入电压、输出电容及其等效串联电阻(equivalent series resistance,ESR)变化时的分岔图,推导了不动点处的雅可比矩阵,利用特征值和最大Lyapunov指数对系统进行了稳定性分析,并验证了分岔图的正确性.重点研究了输入电压和输出电容及其ESR对谷值V2控制Boost变换器的动力学特性的影响.研究结果表明,输入电压增大时,变换器从周期1态经历1次倍周期分岔和边界碰撞分岔进入混沌状态;输出电容及其ESR具有相同的分岔路由,随着输出电容及其ESR的逐渐减小,变换器具有从周期1态经历周期2态、周期4态、周期8态、逐渐演变到混沌态的动力学行为.最后,用仿真和实验结果验证了本文理论分析的正确性.     

谷值电流型脉冲序列控制开关变换器及其能量建模研究

脉冲序列控制是针对工作于电感电流断续导电模式的开关变换器提出的一种非线性、离散控制技术.当开关变换器工作在电感电流连续导电模式时,脉冲序列控制开关变换器存在低频振荡现象,严重影响了脉冲序列控制开关变换器的稳态及瞬态性能.针对这一问题,本文提出一种谷值电流型脉冲序列控制方法,将脉冲序列控制的应用范围从电感电流断续导电模式扩展到电感电流连续导电模式.建立了谷值电流型脉冲序列控制开关变换器的能量迭代模型,并与传统脉冲序列控制开关变换器的能量模型进行对比.结果表明谷值电流型脉冲序列控制电感电流连续导电模式开关变换器具有与传统脉冲序列控制电感电流断续导电模式开关变换器相同的能量传递模式,从而在根本上消除了传统脉冲序列控制电感电流连续导电模式变换器存在的低频振荡现象.     

Resource allocation in rooted trees for VLSI applications

ABSTRACT

Several optimization problems of modifying the weight of vertices in rooted trees, some of which are special cases of the inverse 1-median problem, are solved. Such problems arise in Very Large Scale Integration (VLSI) design of hardware security circuits, circuit synchronization, and analog-to-digital converters. These problems require assigning costly hardware (demands) to the leaves of rooted trees. One common property of these problems is that a resource allocated to an internal node can be shared by the entire sub-tree emanated at the node. Two types of problems are studied here. (1) A tree node employs an addition operation and the demands at the leaves are obtained by summing the resources allocated to nodes along the root-to-leaf paths. A linear-time bottom-up algorithm is shown to minimize the total resources allocated to tree nodes. (2) A tree’s node employs a multiplication operation and the demands at the leaves are obtained by multiplying the resources allocated to nodes along the root-to-leaf paths. A bottom-up dynamic programming algorithm is shown to minimize the total resources allocated to the tree’s nodes. While the above problems are usually solved by design engineers heuristically, this paper offers optimal solutions that can be easily programmed in CAD tools.     

脉冲序列控制电流断续模式Buck变换器的动力学建模与边界碰撞分岔

通过建立一个开关周期内输出电容电荷变化量对应的输出电压变化量, 建立了工作于电感电流断续模式(discontinuous conduction mode, DCM)的脉冲序列(pulse train, PT)控制Buck变换器的近似离散时间模型, 研究了负载电阻及输入电压变化时PT控制DCM Buck变换器的边界碰撞分岔行为. 通过构造相应的迭代映射曲线, 分别分析了不同负载电阻时PT控制DCM Buck变换器的周期1、周期2和周期3运行轨迹的不动点稳定性, 揭示了PT控制DCM Buck变换器在不同周期态时的边界碰撞分岔的形成机理. 研究结果表明, 随参数变化, PT控制DCM Buck变换器始终运行在不同的周期态, 各周期态的切换由边界碰撞分岔引起, 李雅谱诺夫指数始终小于零. 利用PSIM电路仿真软件, 给出了不同负载电阻时的时域波形和相轨图. 实验结果验证了理论分析和仿真结果的正确性, 同时说明了本文动力学建模的可行性.     

电流模式SEPIC变换器倍周期分岔现象研究

以SEPIC变换器中前置电感电流为控制对象,建立了SEPIC变换器断续电流模式下的离散时间模型, 并分析了不动点的稳定性.通过相轨图、功率谱图以及分岔图, 发现电路中存在一种特殊的倍周期分岔现象——电路的运行状态经历了1倍周期、 2倍周期、4倍周期再到2倍周期、4倍周期,最终进入混沌状态.实验结果与仿真结果相一致, 证实了SEPIC变换器在断续电流模式下存在这种倍周期分岔现象.