Efficient strategy for quality control of screen-printed carbon ink disposable sensor electrodes based on simultaneous evaluation of resistance,capacitance and Faradaic current by Fourier transform AC voltammetry

Two types of mass-produced, screen-printed carbon ink-based macrodisc electrodes suitable for routine sensing applications have been fabricated. Microscopic examination of these carbon ink electrode surfaces reveals that their surfaces are both rough and highly heterogeneous, consisting of random arrays of carbon particles of different sizes, as well as binder. Consequently, they may suffer from a lack of reproducibility in their performance because of variable resistance, capacitance or electroactive area. Use of a Fourier transform AC voltammetric protocol involving application of periodic waveform obtained from summation of five sine waves of variable frequency enabled resistance and capacitance, as well as DC and AC Faradaic currents associated with the model processes or (where FcMeOH is ferrocene methanol) to be assessed from a single experiment. Such data, which may be obtained rapidly via this approach, are highly suitable for quality control assessment.     

半胱氨酸在碳钢与硫酸界面的缓蚀行为

Interfacial behavior of cysteine (Cys) between mild steel and sulfuric acid solution as a corrosion inhibitor has been studied with electrochemical AC (alternating current) and DC (direct current) techniques at (25.0±0.1) ℃. The AC impedance results were evaluated using equivalent circuits in which a constant phase element (CPE) has been replaced with double layer capacitance (Cdl) to represent the frequency distribution of experimental data. Changes in impedance parameters (charge transfer resistance and double layer capacitance) indicated that cysteine molecules acted by accumulating at the metal/solution interface. The fractional coverage of the metal surface (θ) was determined using AC impedance results and it was found that the adsorption of cysteine on the mild steel surface followed a Langmuir isothermmodel with a standard free energy of adsorption (⊿G0ads) of -35.1 kJ·mol-1.  To clarify the type of interaction between mild steel surface and cysteine molecules with a molecular orbital approach, electronic properties, such as, the highest occupied molecular orbital (HOMO) energy, the lowest unoccupied molecular orbital (LUMO) energy, and the frontier molecular orbital coefficients have been calculated. Energy gaps for the interaction of mild steel surface and cysteine molecules (ELUMOFe-EHOMOCys and ELUMOCys-EHOMOFe) were used to determine whether cysteine molecules acted as electron donors or electron acceptors when they interacted with the mild steel surface. The local reactivity was evaluated through the condensed Fukui indices. Theoretical calculations were carried out using the density functional theory (DFT) at B3LYP level with the 6-311++G(d,p) basis set for all atoms by Gaussian 03W program.     

The effect of gamma irradiation on electrical and dielectric properties of organic-based Schottky barrier diodes (SBDs) at room temperature

The effect of ⁶⁰Co (γ-ray) irradiation on the electrical and dielectric properties of Au/Polyvinyl Alcohol (Ni,Zn-doped)/n-Si Schottky barrier diodes (SBDs) has been investigated by using capacitance-voltage (C-V) and conductance-voltage (G/ω-V) measurements at room temperature and 1 MHz. The real capacitance and conductance values were obtained by eliminating series resistance (R_s) effect in the measured capacitance (C_m) and conductance (G_m) values through correction. The experimental values of the dielectric constant (ε′), dielectric loss (ε″), loss tangent (tanδ), ac electrical conductivity (σ_ac) and the real (M′) and imaginary (M″) parts of the electrical modulus were found to be strong functions of radiation and applied bias voltage, especially in the depletion and accumulation regions. In addition, the density distribution of interface states (N_ss) profile was obtained using the high-low frequency capacitance (C_HF-C_LF) method for before and after irradiation. The N_ss-V plots give two distinct peaks for both cases, namely before radiation and after radiation, and those peaks correspond to two different localized interface states regions at M/S interface. The changes in the dielectric properties in the depletion and accumulation regions stem especially from the restructuring and reordering of the charges at interface states and surface polarization whereas those in the accumulation region are caused by series resistance effect.     

Bi-directional flow induced by an AC electroosmotic micropump with DC voltage bias

This paper discusses the principle of biased alternating current electroosmosis (ACEO) and its application to move the bulk fluid in a microchannel, as an alternative to mechanical pumping methods. Previous EO-driven flow research has looked at the effect of electrode asymmetry and transverse traveling wave forms on the performance of electroosmotic pumps. This paper presents an analysis that was conducted to assess the effect of combining an AC signal with a DC (direct current) bias when generating the electric field needed to impart electroosmosis (EO) within a microchannel. The results presented here are numerical and experimental. The numerical results were generated through simulations performed using COMSOL 3.5a. Currently available theoretical models for EO flows were embedded in the software and solved numerically to evaluate the effects of channel geometry, frequency of excitation, electrode array geometry, and AC signal with a DC bias on the flow imparted on an electrically conducting fluid. Simulations of the ACEO flow driven by a constant magnitude of AC voltage over symmetric electrodes did not indicate relevant net flows. However, superimposing a DC signal over the AC signal on the same symmetric electrode array leads to a noticeable net forward flow. Moreover, changing the polarity of electrical signal creates a bi-directional flow on symmetrical electrode array. Experimental flow measurements were performed on several electrode array configurations. The mismatch between the numerical and experimental results revealed the limitations of the currently available models for the biased EO. However, they confirm that using a symmetric electrode array excited by an AC signal with a DC bias leads to a significant improvement in flow rates in comparison to the flow rates obtained in an asymmetric electrode array configuration excited just with an AC signal.     

Dielectric study and ac conductivity of iron sodium silicate glasses

A series of glasses with formula (SiO₂)_0.7−x(Na₂O)_0.3(Fe₂O₃)_x with ( 0.0 ≤ x ≤ 0.20) were prepared and studied by means of AC measurements in the frequency range 20 kHz to 13 MHz at room temperature. The study of frequency dependence of both dielectric constant ε' and dielectric loss ε" showed a decrease of both quantities with increasing frequency. The results have been explained on the basis of frequency assistance of electron hopping besides electron polarization. From the Cole-Cole diagram the values of the static dielectric constant ε_s, infinity dielectric constant ε_∞, macroscopic time constant τ, and molecular time constant τ_m are calculated for the studied amorphous samples. The frequency dependence of the ac conductivity obeys a power relation, that is σ_ac (ω) = Α ω^s. The obtained values of the constant s lie in the range of 0.7 ≤ s ≤ 1 in agreement with the theoretical value which confirms the simple quantum mechanical tunneling (QMT) model. The increase in ac conductivity with iron concentration is likely to arise due to structural changes occurring in the glass network. The structure of a glass with similar composition was published and showed clustering of Fe²⁺ and Fe³⁺ ions which favor electron hopping and provide pathways for charge transport.     

Dielectrophoretic investigation of plant virus particles: Cow Pea Mosaic Virus and Tobacco Mosaic Virus

This paper reports experimental results on the dielectrophoretic (DEP) behaviour on two nonenveloped plant viruses of different geometrical shapes, namely Cow Pea Mosaic Virus (CPMV) and Tobacco Mosaic Virus (TMV). The DEP properties of carboxy-modified latex beads of the same size are also reported. The DEP properties of single particles were obtained from measurement of the frequency at which the DEP force on a particle goes to zero (the crossover frequency). The DEP behaviour of particle ensembles was also measured using image processing. The dielectric properties of the particles were evaluated from the DEP data. The surface conductance was found to be 0.3 nS for CPMV, 0.38 nS for TMV, and 0.52 nS for 27 nm diameter carboxy-latex beads. Data analysis has shown that the optimal condition for separation of TMV and CPMV is a low-conductivity suspending medium - below 1 mS/m.     

基于室温离子液体的电导型气体传感器

本文利用室温离子液体对水或有机蒸气吸收后其离子导电性的改变,研制了以离子液体BmimPF6为敏感材料的电导型气体传感器.考查了BmimPF6用量对传感器响应的影响,测定了传感器对不同浓度的水蒸汽及乙醇、二氯甲烷等饱和有机蒸气的响应.实验结果显示,该传感器具有制作方便、结构简单、稳定性高及线性范围宽等优点,可被用于不同浓度的水或有机蒸气/氮气混合气氛中,水蒸汽或有机蒸气浓度的测定.此外,还针对该传感器对乙醇等不同饱和有机蒸气响应信号与这些有机溶剂的理化性质参数间的定量关系,采用化学计量学方法进行了建模分析.     

A mechanistic study on the fragmentation of peptide‐derived Amadori products

Gas phase fragmentation of peptide‐derived Amadori products was investigated using synthetic compounds regioselectively deuterated as well as labeled with ¹⁸O at aminofructose moiety. The eliminated molecule CH₂O contains exclusively protons attached to carbon C6 of the aminofructose moiety. The hydrogen atoms connected with the carbon C1 of the aminofructose moiety are partially eliminated as a component of water molecules during the dehydration process and partially dislocated within the fragmented peptide molecule. The labeled oxygen atom attached to the carbon C2 is eliminated in 100% along with the first loss of water. The MS³ experiments revealed that the product ion formed by triple dehydration of the Amadori product does not eliminate the formaldehyde molecule. On the basis of these observations we proposed a hypothetical mechanism of Amadori products' fragmentation. Copyright © 2009 John Wiley & Sons, Ltd.     

Preparation of high temperature resistance polybenzimidazole resin

Polybenzimidazole’s (PBI) was synthesized from 3,3′-diaminobenzidine and adipic acid by melting copolycondensation. Its thermal properties have been studied The molecular structure and thermal stability of the resulting polymers were characterized by means of FTIR, TGA and DSC. The results indicate that the melting temperature of the PBI is higher than 400°C and the polymer possesses excellent thermal stability. The onset decomposition temperature was determined to be 516°C, and the highest decomposition temperature reaches 536°C. __________ Translated from Journal of Xihua University (Natural Science Edition), 2008, 27 (1) (in Chinese)     

Studies on the activation energy from the ac conductivity measurements of rubber ferrite composites containing manganese zinc ferrite

Manganese zinc ferrites (MZF) have resistivities between 0.01 and 10 Ω m. Making composite materials of ferrites with either natural rubber or plastics will modify the electrical properties of ferrites. The moldability and flexibility of these composites find wide use in industrial and other scientific applications. Mixed ferrites belonging to the series Mn_(1−x)Zn_xFe₂O₄ were synthesized for different ‘x’ values in steps of 0.2, and incorporated in natural rubber matrix (RFC). From the dielectric measurements of the ceramic manganese zinc ferrite and rubber ferrite composites, ac conductivity and activation energy were evaluated. A program was developed with the aid of the LabVIEW package to automate the measurements. The ac conductivity of RFC was then correlated with that of the magnetic filler and matrix by a mixture equation which helps to tailor properties of these composites.