Activity of AC electrokinetically immobilized horseradish peroxidase

Dielectrophoresis (DEP) is an AC electrokinetic effect mainly used to manipulate cells. Smaller particles, like virions, antibodies, enzymes, and even dye molecules can be immobilized by DEP as well. In principle, it was shown that enzymes are active after immobilization by DEP, but no quantification of the retained activity was reported so far. In this study, the activity of the enzyme horseradish peroxidase (HRP) is quantified after immobilization by DEP. For this, HRP is immobilized on regular arrays of titanium nitride ring electrodes of 500 nm diameter and 20 nm widths. The activity of HRP on the electrode chip is measured with a limit of detection of 60 fg HRP by observing the enzymatic turnover of Amplex Red and H₂O₂ to fluorescent resorufin by fluorescence microscopy. The initial activity of the permanently immobilized HRP equals up to 45% of the activity that can be expected for an ideal monolayer of HRP molecules on all electrodes of the array. Localization of the immobilizate on the electrodes is accomplished by staining with the fluorescent product of the enzyme reaction. The high residual activity of enzymes after AC field induced immobilization shows the method's suitability for biosensing and research applications.     

Process prediction of Ni–SiC coatings based on RBF-BP model

The preparation of Ni–SiC coatings using magnetic field-assisted jet electrodeposition under various plating settings is described in this study. A RBF-BP composite neural network with 4 × 4 × 4 × 7 × 10 × 1 was used to predict the corrosion resistance of Ni–SiC coatings prepared by employing different plating parameters. The results show that the fitting degree between the expected value and the actual value of the RBF-BP composite neural network is 0.97497. Moreover, the hybrid neural network can accurately predict the corrosion resistance of Ni–SiC coatings prepared under different process parameters. The corrosion weight loss of the coating is the lowest at the current density of 4 A/dm², a jet rate of 3 m/s, a SiC particle concentration of 8 g/L, and at a magnetic field intensity of 0.8 T, demonstrating its corrosion resistance under these conditions. According to the coating characterization analysis, the coating's grain size was significantly refined, and the surface was smoother with a high amount of uniformly sized SiC nanoparticles.     

亚硫酸盐无氰电沉积金新工艺及机制

直接以氯金酸作为主盐、 羟基乙叉二膦酸（HEDP）作为镀液稳定剂和镀层细化剂、 结合添加剂, 组成亚硫酸盐无氰镀金新工艺; 研究镀液稳定性、 镀层形态及金电沉积机制。结果表明, HEDP可明显提升镀液稳定性;不含HEDP的亚硫酸盐镀金液中, 镀层呈棒状晶粒并随沉积时间延长而逐渐生长,导致镀层外观随镀层厚度增加由金黄色转变为红棕色。镀液含有HEDP时, 金晶粒形态由棒状转变为棱锥状, 且棱锥状晶粒随沉积时间延长生长速率较小, 镀层厚度为1 μm时仍呈现金外观。电化学实验表明金电沉积不经历成核过程。     

Galvanostatically Deposited PtNi Thin-Films as Electrocatalysts for the Hydrogen Evolution Reaction

The synthesis of hybrid platinum materials is fundamental to enable alkaline water electrolysis for cost-effective H₂ generation. In this work, we have used a galvanostatic method to co-deposit PtNi films onto polycrystalline gold. The surface concentrations of Ni (Γ_Ni) and Pt (Γ_Pt) were calculated from electrochemical measurements; the Γ_Pt/Γ_Ni ratio and electrocatalytic activity of these materials towards hydrogen evolution reaction (HER) in 1 M KOH show a strong dependence on the current density pulse applied during the electrodeposition. Analysis of the Tafel parameters hints that, on these deposits, HER proceeds through a Volmer-Heyrovsky mechanism. The galvanostatically deposited PtNi layers present a high current output per Pt gram, 3199 A g_Pt⁻¹, which is significantly larger compared to other PtNi-based materials obtained by more extended and more complex synthesis methods.     

Speciation of Copper(II)-Betaine Complexes as Starting Point for Electrochemical Copper Deposition from Ionic Liquids

The application of ionic liquids for the dissolution of metal oxides is a promising field for the development of more energy- and resource-efficient metallurgical processes. Using such solutions for the production of valuable chemicals or electrochemical metal deposition requires a detailed understanding of the chemical system and the factors influencing it. In the present work, several compounds are reported that crystallize after the dissolution of copper(II) oxide in the ionic liquid [Hbet][NTf₂]. Dependent on the initial amount of chloride, the reaction temperature and the purity of the reagent, copper crystallizes in complexes with varying coordination geometries and ligands. Subsequently, the influence of these different complex species on electrochemical properties is shown. For the first time, copper is deposited from the ionic liquid [Hbet][NTf₂], giving promising opportunities for more resource-efficient copper plating. The copper coatings were analyzed by SEM and EDX measurements. Furthermore, a mechanism for the decomposition of [Hbet][NTf₂] in the presence of chloride is suggested and supported by experimental evidence.     

Investigation of Parameters Influencing Tubular-Shaped Chitosan-Hydroxyapatite Layer Electrodeposition

Tubular-shaped layer electrodeposition from chitosan-hydroxyapatite colloidal solutions has found application in the field of regeneration or replacement of cylindrical tissues and organs, especially peripheral nerve tissue regeneration. Nevertheless, the quantitative and qualitative characterisation of this phenomenon has not been described. In this work, the colloidal systems are subjected to the action of an electric current initiated at different voltages. Parameters of the electrodeposition process (i.e., total charge exchanged, gas volume, and deposit thickness) are monitored over time. Deposit structures are investigated by scanning electron microscopy (SEM) and Fourier-transform infrared spectroscopy (FTIR). The value of voltage influences structural characteristics but not thickness of deposit for the process lasting at least 20 min. The calculated number of exchanged electrons for studied conditions suggests that the mechanism of deposit formation is governed not only by water electrolysis but also interactions between formed hydroxide ions and calcium ions coordinated by chitosan chains.     

Dielectric properties and study of AC electrical conduction mechanisms by non-overlapping small polaron tunneling model in Bis(4-acetylanilinium) tetrachlorocuprate(II) compound

In the present work, the synthesis and characterization of the Bis(4-acetylanilinium) tetrachlorocuprate(II) compound are presented. The structure of this compound is analyzed by X-ray diffraction which confirms the formation of single phase and is in good agreement the literature. Indeed, the Thermo gravimetric Analysis (TGA) shows that the decomposition of the compound is observed in the range of 420–520 K. However, the differential thermal analysis (DTA) indicates the presence of a phase transition at T=363 k. Furthermore, the dielectric properties and AC conductivity were studied over a temperature range (338–413 K) and frequency range (200 Hz–5 MHz) using complex impedance spectroscopy. Dielectric measurements confirmed such thermal analyses by exhibiting the presence of an anomaly in the temperature range of 358–373 K. The complex impedance plots are analyzed by an electrical equivalent circuit consisting of resistance, constant phase element (CPE) and capacitance. The activation energy values of two distinct regions are obtained from log σT vs 1000/T plot and are found to be E=1.27 eV (T<363 K) and E=1.09 eV (363 K<T).The frequency dependence of ac conductivity, σ_ac, has been analyzed by Jonscher's universal power law σ(ω)=σ_dc+Aω^s. The value of s is to be temperature-dependent, which has a tendency to increase with temperature and the non-overlapping small polaron tunneling (NSPT) model is the most applicable conduction mechanism in the title compound.     

Enhancement of Solar Hydrogen Evolution from Water by Surface Modification with CdS and TiO2 on Porous CuInS2 Photocathodes Prepared by an Electrodeposition–Sulfurization Method

Porous films of p‐type CuInS₂, prepared by sulfurization of electrodeposited metals, are surface‐modified with thin layers of CdS and TiO₂. This specific porous electrode evolved H₂ from photoelectrochemical water reduction under simulated sunlight. Modification with thin n‐type CdS and TiO₂ layers significantly increased the cathodic photocurrent and onset potential through the formation of a p–n junction on the surface. The modified photocathodes showed a relatively high efficiency and stable H₂ production under the present reaction conditions.     

具有三维阵列结构的树枝晶CdS的制备及生长机理研究

采用电沉积和溶剂热相结合的方法,以树枝状金属Cd颗粒为模板和前驱体,在乙二胺溶剂中以六亚甲基四胺(HMTA)为表面修饰剂,制备出具有三维阵列结构的树枝晶CdS。利用X射线衍射仪(XRD)、扫描电子显微镜(SEM)、透射电子显微镜(TEM)结合X射线能谱仪(EDS)等对样品的物相、形貌、元素组分和结构进行了分析。结果表明:在溶剂热反应过程中,当不加入HMTA时,得到的产物是无序的CdS纳米线;而在HMTA的作用下,则生成的是具有三维阵列结构的树枝晶CdS;通过分析溶剂热反应过程中的化学反应,并结合产物形貌演变规律,提出了具有三维阵列结构的树枝晶CdS的形成机理。光催化性能测试表明具有三维树枝晶CdS纳米阵列在可见光照射下表现出良好的光催化活性。     

Constructing a Super-Saturated Electrolyte Front Surface for Stable Rechargeable Aqueous Zinc Batteries

Rechargeable aqueous zinc batteries (RAZB) have been re-evaluated because of the superiority in addressing safety and cost concerns. Nonetheless, the limited lifespan arising from dendritic electrodeposition of metallic Zn hinders their further development. Herein, a metal–organic framework (MOF) was constructed as front surface layer to maintain a super-saturated electrolyte layer on the Zn anode. Raman spectroscopy indicated that the highly coordinated ion complexes migrating through the MOF channels were different from the solvation structure in bulk electrolyte. Benefiting from the unique super-saturated front surface, symmetric Zn cells survived up to 3000 hours at 0.5 mA cm⁻², near 55-times that of bare Zn anodes. Moreover, aqueous MnO₂–Zn batteries delivered a reversible capacity of 180.3 mAh g⁻¹ and maintained a high capacity retention of 88.9 % after 600 cycles with MnO₂ mass loading up to 4.2 mg cm⁻².